Release 4.12 drivers/ide/pdc202xx_new.c

/*
 *  Promise TX2/TX4/TX2000/133 IDE driver
 *
 *  This program is free software; you can redistribute it and/or
 *  modify it under the terms of the GNU General Public License
 *  as published by the Free Software Foundation; either version
 *  2 of the License, or (at your option) any later version.
 *
 *  Split from:
 *  linux/drivers/ide/pdc202xx.c        Version 0.35    Mar. 30, 2002
 *  Copyright (C) 1998-2002             Andre Hedrick <andre@linux-ide.org>
 *  Copyright (C) 2005-2007             MontaVista Software, Inc.
 *  Portions Copyright (C) 1999 Promise Technology, Inc.
 *  Author: Frank Tiernan (frankt@promise.com)
 *  Released under terms of General Public License
 */

#include <linux/module.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/ide.h>
#include <linux/ktime.h>

#include <asm/io.h>

#ifdef CONFIG_PPC_PMAC
#include <asm/prom.h>
#endif


#define DRV_NAME "pdc202xx_new"


#undef DEBUG

#ifdef DEBUG

#define DBG(fmt, args...) printk("%s: " fmt, __func__, ## args)
#else

#define DBG(fmt, args...)
#endif



static u8 max_dma_rate(struct pci_dev *pdev)
{
	u8 mode;

	switch(pdev->device) {
		case PCI_DEVICE_ID_PROMISE_20277:
		case PCI_DEVICE_ID_PROMISE_20276:
		case PCI_DEVICE_ID_PROMISE_20275:
		case PCI_DEVICE_ID_PROMISE_20271:
		case PCI_DEVICE_ID_PROMISE_20269:
			mode = 4;
			break;
		case PCI_DEVICE_ID_PROMISE_20270:
		case PCI_DEVICE_ID_PROMISE_20268:
			mode = 3;
			break;
		default:
			return 0;
	}

	return mode;
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
Jens Axboe
51
85.00%
1
50.00%
Sergei Shtylyov
9
15.00%
1
50.00%
Total
60
100.00%
2
100.00%

/**
 * get_indexed_reg - Get indexed register
 * @hwif: for the port address
 * @index: index of the indexed register
 */


static u8 get_indexed_reg(ide_hwif_t *hwif, u8 index)
{
	u8 value;

	outb(index, hwif->dma_base + 1);
	value = inb(hwif->dma_base + 3);

	DBG("index[%02X] value[%02X]\n", index, value);
	return value;
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
Sergei Shtylyov
28
56.00%
1
25.00%
Jens Axboe
14
28.00%
1
25.00%
Bartlomiej Zolnierkiewicz
8
16.00%
2
50.00%
Total
50
100.00%
4
100.00%

/**
 * set_indexed_reg - Set indexed register
 * @hwif: for the port address
 * @index: index of the indexed register
 */


static void set_indexed_reg(ide_hwif_t *hwif, u8 index, u8 value)
{
	outb(index, hwif->dma_base + 1);
	outb(value, hwif->dma_base + 3);
	DBG("index[%02X] value[%02X]\n", index, value);
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
Sergei Shtylyov
24
51.06%
1
25.00%
Jens Axboe
15
31.91%
1
25.00%
Bartlomiej Zolnierkiewicz
8
17.02%
2
50.00%
Total
47
100.00%
4
100.00%

/*
 * ATA Timing Tables based on 133 MHz PLL output clock.
 *
 * If the PLL outputs 100 MHz clock, the ASIC hardware will set
 * the timing registers automatically when "set features" command is
 * issued to the device. However, if the PLL output clock is 133 MHz,
 * the following tables must be used.
 */

static struct pio_timing {
	


u8 reg0c, reg0d, reg13;

} pio_timings [] = {
	{ 0xfb, 0x2b, 0xac },	/* PIO mode 0, IORDY off, Prefetch off */
	{ 0x46, 0x29, 0xa4 },	/* PIO mode 1, IORDY off, Prefetch off */
	{ 0x23, 0x26, 0x64 },	/* PIO mode 2, IORDY off, Prefetch off */
	{ 0x27, 0x0d, 0x35 },	/* PIO mode 3, IORDY on,  Prefetch off */
	{ 0x23, 0x09, 0x25 },	/* PIO mode 4, IORDY on,  Prefetch off */
};


static struct mwdma_timing {
	

u8 reg0e, reg0f;

} mwdma_timings [] = {
	{ 0xdf, 0x5f }, 	/* MWDMA mode 0 */
	{ 0x6b, 0x27 }, 	/* MWDMA mode 1 */
	{ 0x69, 0x25 }, 	/* MWDMA mode 2 */
};


static struct udma_timing {
	


u8 reg10, reg11, reg12;

} udma_timings [] = {
	{ 0x4a, 0x0f, 0xd5 },	/* UDMA mode 0 */
	{ 0x3a, 0x0a, 0xd0 },	/* UDMA mode 1 */
	{ 0x2a, 0x07, 0xcd },	/* UDMA mode 2 */
	{ 0x1a, 0x05, 0xcd },	/* UDMA mode 3 */
	{ 0x1a, 0x03, 0xcd },	/* UDMA mode 4 */
	{ 0x1a, 0x02, 0xcb },	/* UDMA mode 5 */
	{ 0x1a, 0x01, 0xcb },	/* UDMA mode 6 */
};



static void pdcnew_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
{
	struct pci_dev *dev	= to_pci_dev(hwif->dev);
	u8 adj			= (drive->dn & 1) ? 0x08 : 0x00;
	const u8 speed		= drive->dma_mode;

	/*
         * IDE core issues SETFEATURES_XFER to the drive first (thanks to
         * IDE_HFLAG_POST_SET_MODE in ->host_flags).  PDC202xx hardware will
         * automatically set the timing registers based on 100 MHz PLL output.
         *
         * As we set up the PLL to output 133 MHz for UltraDMA/133 capable
         * chips, we must override the default register settings...
         */
	if (max_dma_rate(dev) == 4) {
		u8 mode = speed & 0x07;

		if (speed >= XFER_UDMA_0) {
			set_indexed_reg(hwif, 0x10 + adj,
					udma_timings[mode].reg10);
			set_indexed_reg(hwif, 0x11 + adj,
					udma_timings[mode].reg11);
			set_indexed_reg(hwif, 0x12 + adj,
					udma_timings[mode].reg12);
		} else {
			set_indexed_reg(hwif, 0x0e + adj,
					mwdma_timings[mode].reg0e);
			set_indexed_reg(hwif, 0x0f + adj,
					mwdma_timings[mode].reg0f);
		}
	} else if (speed == XFER_UDMA_2) {
		/* Set tHOLD bit to 0 if using UDMA mode 2 */
		u8 tmp = get_indexed_reg(hwif, 0x10 + adj);

		set_indexed_reg(hwif, 0x10 + adj, tmp & 0x7f);
 	}
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
Sergei Shtylyov
135
69.59%
1
14.29%
Bartlomiej Zolnierkiewicz
34
17.53%
5
71.43%
Jens Axboe
25
12.89%
1
14.29%
Total
194
100.00%
7
100.00%



static void pdcnew_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
{
	struct pci_dev *dev = to_pci_dev(hwif->dev);
	u8 adj = (drive->dn & 1) ? 0x08 : 0x00;
	const u8 pio = drive->pio_mode - XFER_PIO_0;

	if (max_dma_rate(dev) == 4) {
		set_indexed_reg(hwif, 0x0c + adj, pio_timings[pio].reg0c);
		set_indexed_reg(hwif, 0x0d + adj, pio_timings[pio].reg0d);
		set_indexed_reg(hwif, 0x13 + adj, pio_timings[pio].reg13);
	}
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
Bartlomiej Zolnierkiewicz
96
87.27%
5
71.43%
Jens Axboe
12
10.91%
1
14.29%
Sergei Shtylyov
2
1.82%
1
14.29%
Total
110
100.00%
7
100.00%



static u8 pdcnew_cable_detect(ide_hwif_t *hwif)
{
	if (get_indexed_reg(hwif, 0x0b) & 0x04)
		return ATA_CBL_PATA40;
	else
		return ATA_CBL_PATA80;
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
Jens Axboe
15
53.57%
1
33.33%
Bartlomiej Zolnierkiewicz
9
32.14%
1
33.33%
Sergei Shtylyov
4
14.29%
1
33.33%
Total
28
100.00%
3
100.00%



static void pdcnew_reset(ide_drive_t *drive)
{
	/*
         * Deleted this because it is redundant from the caller.
         */
	printk(KERN_WARNING "pdc202xx_new: %s channel reset.\n",
		drive->hwif->channel ? "Secondary" : "Primary");
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
Sergei Shtylyov
14
51.85%
1
33.33%
Jens Axboe
11
40.74%
1
33.33%
Bartlomiej Zolnierkiewicz
2
7.41%
1
33.33%
Total
27
100.00%
3
100.00%

/**
 * read_counter - Read the byte count registers
 * @dma_base: for the port address
 */


static long read_counter(u32 dma_base)
{
	u32  pri_dma_base = dma_base, sec_dma_base = dma_base + 0x08;
	u8   cnt0, cnt1, cnt2, cnt3;
	long count = 0, last;
	int  retry = 3;

	do {
		last = count;

		/* Read the current count */
		outb(0x20, pri_dma_base + 0x01);
		cnt0 = inb(pri_dma_base + 0x03);
		outb(0x21, pri_dma_base + 0x01);
		cnt1 = inb(pri_dma_base + 0x03);
		outb(0x20, sec_dma_base + 0x01);
		cnt2 = inb(sec_dma_base + 0x03);
		outb(0x21, sec_dma_base + 0x01);
		cnt3 = inb(sec_dma_base + 0x03);

		count = (cnt3 << 23) | (cnt2 << 15) | (cnt1 << 8) | cnt0;

		/*
                 * The 30-bit decrementing counter is read in 4 pieces.
                 * Incorrect value may be read when the most significant bytes
                 * are changing...
                 */
	} while (retry-- && (((last ^ count) & 0x3fff8000) || last < count));

	DBG("cnt0[%02X] cnt1[%02X] cnt2[%02X] cnt3[%02X]\n",
		  cnt0, cnt1, cnt2, cnt3);

	return count;
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
Sergei Shtylyov
182
100.00%
1
100.00%
Total
182
100.00%
1
100.00%

/**
 * detect_pll_input_clock - Detect the PLL input clock in Hz.
 * @dma_base: for the port address
 * E.g. 16949000 on 33 MHz PCI bus, i.e. half of the PCI clock.
 */


static long detect_pll_input_clock(unsigned long dma_base)
{
	ktime_t start_time, end_time;
	long start_count, end_count;
	long pll_input, usec_elapsed;
	u8 scr1;

	start_count = read_counter(dma_base);
	start_time = ktime_get();

	/* Start the test mode */
	outb(0x01, dma_base + 0x01);
	scr1 = inb(dma_base + 0x03);
	DBG("scr1[%02X]\n", scr1);
	outb(scr1 | 0x40, dma_base + 0x03);

	/* Let the counter run for 10 ms. */
	mdelay(10);

	end_count = read_counter(dma_base);
	end_time = ktime_get();

	/* Stop the test mode */
	outb(0x01, dma_base + 0x01);
	scr1 = inb(dma_base + 0x03);
	DBG("scr1[%02X]\n", scr1);
	outb(scr1 & ~0x40, dma_base + 0x03);

	/*
         * Calculate the input clock in Hz
         * (the clock counter is 30 bit wide and counts down)
         */
	usec_elapsed = ktime_us_delta(end_time, start_time);
	pll_input = ((start_count - end_count) & 0x3fffffff) / 10 *
		(10000000 / usec_elapsed);

	DBG("start[%ld] end[%ld]\n", start_count, end_count);

	return pll_input;
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
Sergei Shtylyov
137
78.29%
1
20.00%
Albert Lee
22
12.57%
1
20.00%
Amitoj Kaur Chawla
11
6.29%
1
20.00%
Jens Axboe
4
2.29%
1
20.00%
Mikael Pettersson
1
0.57%
1
20.00%
Total
175
100.00%
5
100.00%

#ifdef CONFIG_PPC_PMAC


static void apple_kiwi_init(struct pci_dev *pdev)
{
	struct device_node *np = pci_device_to_OF_node(pdev);
	u8 conf;

	if (np == NULL || !of_device_is_compatible(np, "kiwi-root"))
		return;

	if (pdev->revision >= 0x03) {
		/* Setup chip magic config stuff (from darwin) */
		pci_read_config_byte (pdev, 0x40, &conf);
		pci_write_config_byte(pdev, 0x40, (conf | 0x01));
	}
}
Contributors
Person
Tokens
Prop
Commits
CommitProp
Sergei Shtylyov
36
49.32%
1
25.00%
Andrew Morton
33
45.21%
1
25.00%
Bartlomiej Zolnierkiewicz
3
4.11%
1
25.00%
Stephen Rothwell
1
1.37%
1
25.00%
Total
73
100.00%
4
100.00%

#endif /* CONFIG_PPC_PMAC */



static int init_chipset_pdcnew(struct pci_dev *dev)
{
	const char *name = DRV_NAME;
	unsigned long dma_base = pci_resource_start(dev, 4);
	unsigned long sec_dma_base = dma_base + 0x08;
	long pll_input, pll_output, ratio;
	int f, r;
	u8 pll_ctl0, pll_ctl1;

	if (dma_base == 0)
		return -EFAULT;

#ifdef CONFIG_PPC_PMAC
	apple_kiwi_init(dev);
#endif

	/* Calculate the required PLL output frequency */
	switch(max_dma_rate(dev)) {
		case 4: /* it's 133 MHz for Ultra133 chips */
			pll_output = 133333333;
			break;
		case 3: /* and  100 MHz for Ultra100 chips */
		default:
			pll_output = 100000000;
			break;
	}

	/*
         * Detect PLL input clock.
         * On some systems, where PCI bus is running at non-standard clock rate
         * (e.g. 25 or 40 MHz), we have to adjust the cycle time.
         * PDC20268 and newer chips employ PLL circuit to help correct timing
         * registers setting.
         */
	pll_input = detect_pll_input_clock(dma_base);
	printk(KERN_INFO "%s %s: PLL input clock is %ld kHz\n",
		name, pci_name(dev), pll_input / 1000);

	/* Sanity check */
	if (unlikely(pll_input < 5000000L || pll_input > 70000000L)) {
		printk(KERN_ERR "%s %s: Bad PLL input clock %ld Hz, giving up!"
			"\n", name, pci_name(dev), pll_input);
		goto out;
	}

#ifdef DEBUG
	DBG("pll_output is %ld Hz\n", pll_output);

	/* Show the current clock value of PLL control register
         * (maybe already configured by the BIOS)
         */
	outb(0x02, sec_dma_base + 0x01);
	pll_ctl0 = inb(sec_dma_base + 0x03);
	outb(0x03, sec_dma_base + 0x01);
	pll_ctl1 = inb(sec_dma_base + 0x03);

	DBG("pll_ctl[%02X][%02X]\n", pll_ctl0, pll_ctl1);
#endif

	/*
         * Calculate the ratio of F, R and NO
         * POUT = (F + 2) / (( R + 2) * NO)
         */
	ratio = pll_output / (pll_input / 1000);
	if (ratio < 8600L) { /* 8.6x */
		/* Using NO = 0x01, R = 0x0d */
		r = 0x0d;
	} else if (ratio < 12900L) { /* 12.9x */
		/* Using NO = 0x01, R = 0x08 */
		r = 0x08;
	} else if (ratio < 16100L) { /* 16.1x */
		/* Using NO = 0x01, R = 0x06 */
		r = 0x06;
	} else if (ratio < 64000L) { /* 64x */
		r = 0x00;
	} else {
		/* Invalid ratio */
		printk(KERN_ERR "%s %s: Bad ratio %ld, giving up!\n",
			name, pci_name(dev), ratio);
		goto out;
	}

	f = (ratio * (r + 2)) / 1000 - 2;

	DBG("F[%d] R[%d] ratio*1000[%ld]\n", f, r, ratio);

	if (unlikely(f < 0 || f > 127)) {
		/* Invalid F */
		printk(KERN_ERR "%s %s: F[%d] invalid!\n",
			name, pci_name(dev), f);
		goto out;
	}

	pll_ctl0 = (u8) f;
	pll_ctl1 = (u8) r;

	DBG("Writing pll_ctl[%02X][%02X]\n", pll_ctl0, pll_ctl1);

	outb(0x02,     sec_dma_base + 0x01);
	outb(pll_ctl0, sec_dma_base + 0x03);
	outb(0x03,     sec_dma_base + 0x01);
	outb(pll_ctl1, sec_dma_base + 0x03);

	/* Wait the PLL circuit to be stable */
	mdelay(30);

#ifdef DEBUG
	/*
         *  Show the current clock value of PLL control register
         */
	outb(0x02, sec_dma_base + 0x01);
	pll_ctl0 = inb(sec_dma_base + 0x03);
	outb(0x03, sec_dma_base + 0x01);
	pll_ctl1 = inb(sec_dma_base + 0x03);

	DBG("pll_ctl[%02X][%02X]\n", pll_ctl0, pll_ctl1);
#endif

 out:
	return 0;
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
Sergei Shtylyov
386
78.14%
1
14.29%
Andrew Morton
56
11.34%
1
14.29%
Bartlomiej Zolnierkiewicz
42
8.50%
4
57.14%
Jens Axboe
10
2.02%
1
14.29%
Total
494
100.00%
7
100.00%



static struct pci_dev *pdc20270_get_dev2(struct pci_dev *dev)
{
	struct pci_dev *dev2;

	dev2 = pci_get_slot(dev->bus, PCI_DEVFN(PCI_SLOT(dev->devfn) + 1,
						PCI_FUNC(dev->devfn)));

	if (dev2 &&
	    dev2->vendor == dev->vendor &&
	    dev2->device == dev->device) {

		if (dev2->irq != dev->irq) {
			dev2->irq = dev->irq;
			printk(KERN_INFO DRV_NAME " %s: PCI config space "
				"interrupt fixed\n", pci_name(dev));
		}

		return dev2;
	}

	return NULL;
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
Jens Axboe
49
47.57%
1
10.00%
Sergei Shtylyov
33
32.04%
1
10.00%
Bartlomiej Zolnierkiewicz
13
12.62%
5
50.00%
Alan Cox
5
4.85%
2
20.00%
Greg Kroah-Hartman
3
2.91%
1
10.00%
Total
103
100.00%
10
100.00%


static const struct ide_port_ops pdcnew_port_ops = {
	.set_pio_mode		= pdcnew_set_pio_mode,
	.set_dma_mode		= pdcnew_set_dma_mode,
	.resetproc		= pdcnew_reset,
	.cable_detect		= pdcnew_cable_detect,
};


#define DECLARE_PDCNEW_DEV(udma) \
	{ \
                .name           = DRV_NAME, \
                .init_chipset   = init_chipset_pdcnew, \
                .port_ops       = &pdcnew_port_ops, \
                .host_flags     = IDE_HFLAG_POST_SET_MODE | \
                                  IDE_HFLAG_ERROR_STOPS_FIFO | \
                                  IDE_HFLAG_OFF_BOARD, \
                .pio_mask       = ATA_PIO4, \
                .mwdma_mask     = ATA_MWDMA2, \
                .udma_mask      = udma, \
        }


static const struct ide_port_info pdcnew_chipsets[] = {
	/* 0: PDC202{68,70} */		DECLARE_PDCNEW_DEV(ATA_UDMA5),
	/* 1: PDC202{69,71,75,76,77} */	DECLARE_PDCNEW_DEV(ATA_UDMA6),
};

/**
 *      pdc202new_init_one      -       called when a pdc202xx is found
 *      @dev: the pdc202new device
 *      @id: the matching pci id
 *
 *      Called when the PCI registration layer (or the IDE initialization)
 *      finds a device matching our IDE device tables.
 */
 


static int pdc202new_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
	const struct ide_port_info *d = &pdcnew_chipsets[id->driver_data];
	struct pci_dev *bridge = dev->bus->self;

	if (dev->device == PCI_DEVICE_ID_PROMISE_20270 && bridge &&
	    bridge->vendor == PCI_VENDOR_ID_DEC &&
	    bridge->device == PCI_DEVICE_ID_DEC_21150) {
		struct pci_dev *dev2;

		if (PCI_SLOT(dev->devfn) & 2)
			return -ENODEV;

		dev2 = pdc20270_get_dev2(dev);

		if (dev2) {
			int ret = ide_pci_init_two(dev, dev2, d, NULL);
			if (ret < 0)
				pci_dev_put(dev2);
			return ret;
		}
	}

	if (dev->device == PCI_DEVICE_ID_PROMISE_20276 && bridge &&
	    bridge->vendor == PCI_VENDOR_ID_INTEL &&
	    (bridge->device == PCI_DEVICE_ID_INTEL_I960 ||
	     bridge->device == PCI_DEVICE_ID_INTEL_I960RM)) {
		printk(KERN_INFO DRV_NAME " %s: attached to I2O RAID controller,"
			" skipping\n", pci_name(dev));
		return -ENODEV;
	}

	return ide_pci_init_one(dev, d, NULL);
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
Bartlomiej Zolnierkiewicz
154
84.62%
7
77.78%
Jens Axboe
28
15.38%
2
22.22%
Total
182
100.00%
9
100.00%



static void pdc202new_remove(struct pci_dev *dev)
{
	struct ide_host *host = pci_get_drvdata(dev);
	struct pci_dev *dev2 = host->dev[1] ? to_pci_dev(host->dev[1]) : NULL;

	ide_pci_remove(dev);
	pci_dev_put(dev2);
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
Bartlomiej Zolnierkiewicz
55
100.00%
1
100.00%
Total
55
100.00%
1
100.00%


static const struct pci_device_id pdc202new_pci_tbl[] = {
	{ PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20268), 0 },
	{ PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20269), 1 },
	{ PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20270), 0 },
	{ PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20271), 1 },
	{ PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20275), 1 },
	{ PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20276), 1 },
	{ PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20277), 1 },
	{ 0, },
};
MODULE_DEVICE_TABLE(pci, pdc202new_pci_tbl);


static struct pci_driver pdc202new_pci_driver = {
	.name		= "Promise_IDE",
	.id_table	= pdc202new_pci_tbl,
	.probe		= pdc202new_init_one,
	.remove		= pdc202new_remove,
	.suspend	= ide_pci_suspend,
	.resume		= ide_pci_resume,
};



static int __init pdc202new_ide_init(void)
{
	return ide_pci_register_driver(&pdc202new_pci_driver);
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
Jens Axboe
14
87.50%
2
50.00%
Bartlomiej Zolnierkiewicz
2
12.50%
2
50.00%
Total
16
100.00%
4
100.00%



static void __exit pdc202new_ide_exit(void)
{
	pci_unregister_driver(&pdc202new_pci_driver);
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
Bartlomiej Zolnierkiewicz
15
100.00%
2
100.00%
Total
15
100.00%
2
100.00%


module_init(pdc202new_ide_init);

module_exit(pdc202new_ide_exit);

MODULE_AUTHOR("Andre Hedrick, Frank Tiernan");
MODULE_DESCRIPTION("PCI driver module for Promise PDC20268 and higher");
MODULE_LICENSE("GPL");
Overall Contributors
Person
Tokens
Prop
Commits
CommitProp
Sergei Shtylyov
1206
52.69%
4
7.84%
Bartlomiej Zolnierkiewicz
564
24.64%
33
64.71%
Jens Axboe
358
15.64%
2
3.92%
Andrew Morton
100
4.37%
1
1.96%
Albert Lee
22
0.96%
1
1.96%
Amitoj Kaur Chawla
14
0.61%
1
1.96%
Tejun Heo
7
0.31%
1
1.96%
Luca Tettamanti
6
0.26%
1
1.96%
Alan Cox
5
0.22%
2
3.92%
Greg Kroah-Hartman
3
0.13%
1
1.96%
Deepak Saxena
1
0.04%
1
1.96%
Harvey Harrison
1
0.04%
1
1.96%
Stephen Rothwell
1
0.04%
1
1.96%
Mikael Pettersson
1
0.04%
1
1.96%
Total
2289
100.00%
51
100.00%
Directory: drivers/ide

Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.