Release 4.12 drivers/macintosh/windfarm_lm75_sensor.c
  
  
  
/*
 * Windfarm PowerMac thermal control. LM75 sensor
 *
 * (c) Copyright 2005 Benjamin Herrenschmidt, IBM Corp.
 *                    <benh@kernel.crashing.org>
 *
 * Released under the term of the GNU GPL v2.
 */
#include <linux/types.h>
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/wait.h>
#include <linux/i2c.h>
#include <asm/prom.h>
#include <asm/machdep.h>
#include <asm/io.h>
#include <asm/sections.h>
#include <asm/pmac_low_i2c.h>
#include "windfarm.h"
#define VERSION "1.0"
#undef DEBUG
#ifdef DEBUG
#define DBG(args...)	printk(args)
#else
#define DBG(args...)	do { } while(0)
#endif
struct wf_lm75_sensor {
	
int			ds1775 : 1;
	
int			inited : 1;
	
struct i2c_client	*i2c;
	
struct wf_sensor	sens;
};
#define wf_to_lm75(c) container_of(c, struct wf_lm75_sensor, sens)
static int wf_lm75_get(struct wf_sensor *sr, s32 *value)
{
	struct wf_lm75_sensor *lm = wf_to_lm75(sr);
	s32 data;
	if (lm->i2c == NULL)
		return -ENODEV;
	/* Init chip if necessary */
	if (!lm->inited) {
		u8 cfg_new, cfg = (u8)i2c_smbus_read_byte_data(lm->i2c, 1);
		DBG("wf_lm75: Initializing %s, cfg was: %02x\n",
		    sr->name, cfg);
		/* clear shutdown bit, keep other settings as left by
                 * the firmware for now
                 */
		cfg_new = cfg & ~0x01;
		i2c_smbus_write_byte_data(lm->i2c, 1, cfg_new);
		lm->inited = 1;
		/* If we just powered it up, let's wait 200 ms */
		msleep(200);
	}
	/* Read temperature register */
	data = (s32)le16_to_cpu(i2c_smbus_read_word_data(lm->i2c, 0));
	data <<= 8;
	*value = data;
	return 0;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp | 
| Benjamin Herrenschmidt | 139 | 100.00% | 1 | 100.00% | 
| Total | 139 | 100.00% | 1 | 100.00% | 
static void wf_lm75_release(struct wf_sensor *sr)
{
	struct wf_lm75_sensor *lm = wf_to_lm75(sr);
	kfree(lm);
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp | 
| Benjamin Herrenschmidt | 26 | 100.00% | 1 | 100.00% | 
| Total | 26 | 100.00% | 1 | 100.00% | 
static struct wf_sensor_ops wf_lm75_ops = {
	.get_value	= wf_lm75_get,
	.release	= wf_lm75_release,
	.owner		= THIS_MODULE,
};
static int wf_lm75_probe(struct i2c_client *client,
			 const struct i2c_device_id *id)
{	
	struct wf_lm75_sensor *lm;
	int rc, ds1775 = id->driver_data;
	const char *name, *loc;
	DBG("wf_lm75: creating  %s device at address 0x%02x\n",
	    ds1775 ? "ds1775" : "lm75", client->addr);
	loc = of_get_property(client->dev.of_node, "hwsensor-location", NULL);
	if (!loc) {
		dev_warn(&client->dev, "Missing hwsensor-location property!\n");
		return -ENXIO;
	}
	/* Usual rant about sensor names not beeing very consistent in
         * the device-tree, oh well ...
         * Add more entries below as you deal with more setups
         */
	if (!strcmp(loc, "Hard drive") || !strcmp(loc, "DRIVE BAY"))
		name = "hd-temp";
	else if (!strcmp(loc, "Incoming Air Temp"))
		name = "incoming-air-temp";
	else if (!strcmp(loc, "ODD Temp"))
		name = "optical-drive-temp";
	else if (!strcmp(loc, "HD Temp"))
		name = "hard-drive-temp";
	else if (!strcmp(loc, "PCI SLOTS"))
		name = "slots-temp";
	else if (!strcmp(loc, "CPU A INLET"))
		name = "cpu-inlet-temp-0";
	else if (!strcmp(loc, "CPU B INLET"))
		name = "cpu-inlet-temp-1";
	else
		return -ENXIO;
 	
	lm = kzalloc(sizeof(struct wf_lm75_sensor), GFP_KERNEL);
	if (lm == NULL)
		return -ENODEV;
	lm->inited = 0;
	lm->ds1775 = ds1775;
	lm->i2c = client;
	lm->sens.name = name;
	lm->sens.ops = &wf_lm75_ops;
	i2c_set_clientdata(client, lm);
	rc = wf_register_sensor(&lm->sens);
	if (rc)
		kfree(lm);
	return rc;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp | 
| Benjamin Herrenschmidt | 218 | 73.90% | 4 | 57.14% | 
| Étienne Bersac | 45 | 15.25% | 1 | 14.29% | 
| Jean Delvare | 32 | 10.85% | 2 | 28.57% | 
| Total | 295 | 100.00% | 7 | 100.00% | 
static int wf_lm75_remove(struct i2c_client *client)
{
	struct wf_lm75_sensor *lm = i2c_get_clientdata(client);
	DBG("wf_lm75: i2c detatch called for %s\n", lm->sens.name);
	/* Mark client detached */
	lm->i2c = NULL;
	/* release sensor */
	wf_unregister_sensor(&lm->sens);
	return 0;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp | 
| Benjamin Herrenschmidt | 49 | 96.08% | 1 | 50.00% | 
| Jean Delvare | 2 | 3.92% | 1 | 50.00% | 
| Total | 51 | 100.00% | 2 | 100.00% | 
static const struct i2c_device_id wf_lm75_id[] = {
	{ "MAC,lm75", 0 },
	{ "MAC,ds1775", 1 },
	{ }
};
MODULE_DEVICE_TABLE(i2c, wf_lm75_id);
static struct i2c_driver wf_lm75_driver = {
	.driver = {
		.name	= "wf_lm75",
        },
	.probe		= wf_lm75_probe,
	.remove		= wf_lm75_remove,
	.id_table	= wf_lm75_id,
};
module_i2c_driver(wf_lm75_driver);
MODULE_AUTHOR("Benjamin Herrenschmidt <benh@kernel.crashing.org>");
MODULE_DESCRIPTION("LM75 sensor objects for PowerMacs thermal control");
MODULE_LICENSE("GPL");
Overall Contributors
| Person | Tokens | Prop | Commits | CommitProp | 
| Benjamin Herrenschmidt | 584 | 81.22% | 5 | 55.56% | 
| Jean Delvare | 88 | 12.24% | 2 | 22.22% | 
| Étienne Bersac | 45 | 6.26% | 1 | 11.11% | 
| Wei Yongjun | 2 | 0.28% | 1 | 11.11% | 
| Total | 719 | 100.00% | 9 | 100.00% | 
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.