Release 4.12 drivers/mfd/ab3100-core.c
  
  
  
/*
 * Copyright (C) 2007-2010 ST-Ericsson
 * License terms: GNU General Public License (GPL) version 2
 * Low-level core for exclusive access to the AB3100 IC on the I2C bus
 * and some basic chip-configuration.
 * Author: Linus Walleij <linus.walleij@stericsson.com>
 */
#include <linux/i2c.h>
#include <linux/mutex.h>
#include <linux/list.h>
#include <linux/notifier.h>
#include <linux/slab.h>
#include <linux/err.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/device.h>
#include <linux/interrupt.h>
#include <linux/random.h>
#include <linux/debugfs.h>
#include <linux/seq_file.h>
#include <linux/uaccess.h>
#include <linux/mfd/core.h>
#include <linux/mfd/ab3100.h>
#include <linux/mfd/abx500.h>
/* These are the only registers inside AB3100 used in this main file */
/* Interrupt event registers */
#define AB3100_EVENTA1		0x21
#define AB3100_EVENTA2		0x22
#define AB3100_EVENTA3		0x23
/* AB3100 DAC converter registers */
#define AB3100_DIS		0x00
#define AB3100_D0C		0x01
#define AB3100_D1C		0x02
#define AB3100_D2C		0x03
#define AB3100_D3C		0x04
/* Chip ID register */
#define AB3100_CID		0x20
/* AB3100 interrupt registers */
#define AB3100_IMRA1		0x24
#define AB3100_IMRA2		0x25
#define AB3100_IMRA3		0x26
#define AB3100_IMRB1		0x2B
#define AB3100_IMRB2		0x2C
#define AB3100_IMRB3		0x2D
/* System Power Monitoring and control registers */
#define AB3100_MCA		0x2E
#define AB3100_MCB		0x2F
/* SIM power up */
#define AB3100_SUP		0x50
/*
 * I2C communication
 *
 * The AB3100 is usually assigned address 0x48 (7-bit)
 * The chip is defined in the platform i2c_board_data section.
 */
static int ab3100_get_chip_id(struct device *dev)
{
	struct ab3100 *ab3100 = dev_get_drvdata(dev->parent);
	return (int)ab3100->chip_id;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp | 
| Mattias Wallin | 19 | 61.29% | 1 | 50.00% | 
| Linus Walleij | 12 | 38.71% | 1 | 50.00% | 
| Total | 31 | 100.00% | 2 | 100.00% | 
static int ab3100_set_register_interruptible(struct ab3100 *ab3100,
	u8 reg, u8 regval)
{
	u8 regandval[2] = {reg, regval};
	int err;
	err = mutex_lock_interruptible(&ab3100->access_mutex);
	if (err)
		return err;
	/*
         * A two-byte write message with the first byte containing the register
         * number and the second byte containing the value to be written
         * effectively sets a register in the AB3100.
         */
	err = i2c_master_send(ab3100->i2c_client, regandval, 2);
	if (err < 0) {
		dev_err(ab3100->dev,
			"write error (write register): %d\n",
			err);
	} else if (err != 2) {
		dev_err(ab3100->dev,
			"write error (write register)\n"
			"  %d bytes transferred (expected 2)\n",
			err);
		err = -EIO;
	} else {
		/* All is well */
		err = 0;
	}
	mutex_unlock(&ab3100->access_mutex);
	return err;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp | 
| Linus Walleij | 124 | 97.64% | 3 | 60.00% | 
| Lee Jones | 2 | 1.57% | 1 | 20.00% | 
| Mattias Wallin | 1 | 0.79% | 1 | 20.00% | 
| Total | 127 | 100.00% | 5 | 100.00% | 
static int set_register_interruptible(struct device *dev,
	u8 bank, u8 reg, u8 value)
{
	struct ab3100 *ab3100 = dev_get_drvdata(dev->parent);
	return ab3100_set_register_interruptible(ab3100, reg, value);
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp | 
| Mattias Wallin | 39 | 92.86% | 1 | 33.33% | 
| Linus Walleij | 3 | 7.14% | 2 | 66.67% | 
| Total | 42 | 100.00% | 3 | 100.00% | 
/*
 * The test registers exist at an I2C bus address up one
 * from the ordinary base. They are not supposed to be used
 * in production code, but sometimes you have to do that
 * anyway. It's currently only used from this file so declare
 * it static and do not export.
 */
static int ab3100_set_test_register_interruptible(struct ab3100 *ab3100,
				    u8 reg, u8 regval)
{
	u8 regandval[2] = {reg, regval};
	int err;
	err = mutex_lock_interruptible(&ab3100->access_mutex);
	if (err)
		return err;
	err = i2c_master_send(ab3100->testreg_client, regandval, 2);
	if (err < 0) {
		dev_err(ab3100->dev,
			"write error (write test register): %d\n",
			err);
	} else if (err != 2) {
		dev_err(ab3100->dev,
			"write error (write test register)\n"
			"  %d bytes transferred (expected 2)\n",
			err);
		err = -EIO;
	} else {
		/* All is well */
		err = 0;
	}
	mutex_unlock(&ab3100->access_mutex);
	return err;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp | 
| Linus Walleij | 124 | 98.41% | 2 | 66.67% | 
| Lee Jones | 2 | 1.59% | 1 | 33.33% | 
| Total | 126 | 100.00% | 3 | 100.00% | 
static int ab3100_get_register_interruptible(struct ab3100 *ab3100,
					     u8 reg, u8 *regval)
{
	int err;
	err = mutex_lock_interruptible(&ab3100->access_mutex);
	if (err)
		return err;
	/*
         * AB3100 require an I2C "stop" command between each message, else
         * it will not work. The only way of achieveing this with the
         * message transport layer is to send the read and write messages
         * separately.
         */
	err = i2c_master_send(ab3100->i2c_client, ®, 1);
	if (err < 0) {
		dev_err(ab3100->dev,
			"write error (send register address): %d\n",
			err);
		goto get_reg_out_unlock;
	} else if (err != 1) {
		dev_err(ab3100->dev,
			"write error (send register address)\n"
			"  %d bytes transferred (expected 1)\n",
			err);
		err = -EIO;
		goto get_reg_out_unlock;
	} else {
		/* All is well */
		err = 0;
	}
	err = i2c_master_recv(ab3100->i2c_client, regval, 1);
	if (err < 0) {
		dev_err(ab3100->dev,
			"write error (read register): %d\n",
			err);
		goto get_reg_out_unlock;
	} else if (err != 1) {
		dev_err(ab3100->dev,
			"write error (read register)\n"
			"  %d bytes transferred (expected 1)\n",
			err);
		err = -EIO;
		goto get_reg_out_unlock;
	} else {
		/* All is well */
		err = 0;
	}
 get_reg_out_unlock:
	mutex_unlock(&ab3100->access_mutex);
	return err;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp | 
| Linus Walleij | 192 | 97.46% | 2 | 50.00% | 
| Lee Jones | 4 | 2.03% | 1 | 25.00% | 
| Mattias Wallin | 1 | 0.51% | 1 | 25.00% | 
| Total | 197 | 100.00% | 4 | 100.00% | 
static int get_register_interruptible(struct device *dev, u8 bank, u8 reg,
				      u8 *value)
{
	struct ab3100 *ab3100 = dev_get_drvdata(dev->parent);
	return ab3100_get_register_interruptible(ab3100, reg, value);
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp | 
| Mattias Wallin | 40 | 93.02% | 1 | 33.33% | 
| Linus Walleij | 3 | 6.98% | 2 | 66.67% | 
| Total | 43 | 100.00% | 3 | 100.00% | 
static int ab3100_get_register_page_interruptible(struct ab3100 *ab3100,
			     u8 first_reg, u8 *regvals, u8 numregs)
{
	int err;
	if (ab3100->chip_id == 0xa0 ||
	    ab3100->chip_id == 0xa1)
		/* These don't support paged reads */
		return -EIO;
	err = mutex_lock_interruptible(&ab3100->access_mutex);
	if (err)
		return err;
	/*
         * Paged read also require an I2C "stop" command.
         */
	err = i2c_master_send(ab3100->i2c_client, &first_reg, 1);
	if (err < 0) {
		dev_err(ab3100->dev,
			"write error (send first register address): %d\n",
			err);
		goto get_reg_page_out_unlock;
	} else if (err != 1) {
		dev_err(ab3100->dev,
			"write error (send first register address)\n"
			"  %d bytes transferred (expected 1)\n",
			err);
		err = -EIO;
		goto get_reg_page_out_unlock;
	}
	err = i2c_master_recv(ab3100->i2c_client, regvals, numregs);
	if (err < 0) {
		dev_err(ab3100->dev,
			"write error (read register page): %d\n",
			err);
		goto get_reg_page_out_unlock;
	} else if (err != numregs) {
		dev_err(ab3100->dev,
			"write error (read register page)\n"
			"  %d bytes transferred (expected %d)\n",
			err, numregs);
		err = -EIO;
		goto get_reg_page_out_unlock;
	}
	/* All is well */
	err = 0;
 get_reg_page_out_unlock:
	mutex_unlock(&ab3100->access_mutex);
	return err;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp | 
| Linus Walleij | 205 | 97.62% | 2 | 50.00% | 
| Lee Jones | 4 | 1.90% | 1 | 25.00% | 
| Mattias Wallin | 1 | 0.48% | 1 | 25.00% | 
| Total | 210 | 100.00% | 4 | 100.00% | 
static int get_register_page_interruptible(struct device *dev, u8 bank,
	u8 first_reg, u8 *regvals, u8 numregs)
{
	struct ab3100 *ab3100 = dev_get_drvdata(dev->parent);
	return ab3100_get_register_page_interruptible(ab3100,
			first_reg, regvals, numregs);
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp | 
| Mattias Wallin | 45 | 93.75% | 1 | 33.33% | 
| Linus Walleij | 3 | 6.25% | 2 | 66.67% | 
| Total | 48 | 100.00% | 3 | 100.00% | 
static int ab3100_mask_and_set_register_interruptible(struct ab3100 *ab3100,
				 u8 reg, u8 andmask, u8 ormask)
{
	u8 regandval[2] = {reg, 0};
	int err;
	err = mutex_lock_interruptible(&ab3100->access_mutex);
	if (err)
		return err;
	/* First read out the target register */
	err = i2c_master_send(ab3100->i2c_client, ®, 1);
	if (err < 0) {
		dev_err(ab3100->dev,
			"write error (maskset send address): %d\n",
			err);
		goto get_maskset_unlock;
	} else if (err != 1) {
		dev_err(ab3100->dev,
			"write error (maskset send address)\n"
			"  %d bytes transferred (expected 1)\n",
			err);
		err = -EIO;
		goto get_maskset_unlock;
	}
	err = i2c_master_recv(ab3100->i2c_client, ®andval[1], 1);
	if (err < 0) {
		dev_err(ab3100->dev,
			"write error (maskset read register): %d\n",
			err);
		goto get_maskset_unlock;
	} else if (err != 1) {
		dev_err(ab3100->dev,
			"write error (maskset read register)\n"
			"  %d bytes transferred (expected 1)\n",
			err);
		err = -EIO;
		goto get_maskset_unlock;
	}
	/* Modify the register */
	regandval[1] &= andmask;
	regandval[1] |= ormask;
	/* Write the register */
	err = i2c_master_send(ab3100->i2c_client, regandval, 2);
	if (err < 0) {
		dev_err(ab3100->dev,
			"write error (write register): %d\n",
			err);
		goto get_maskset_unlock;
	} else if (err != 2) {
		dev_err(ab3100->dev,
			"write error (write register)\n"
			"  %d bytes transferred (expected 2)\n",
			err);
		err = -EIO;
		goto get_maskset_unlock;
	}
	/* All is well */
	err = 0;
 get_maskset_unlock:
	mutex_unlock(&ab3100->access_mutex);
	return err;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp | 
| Linus Walleij | 277 | 97.54% | 2 | 50.00% | 
| Lee Jones | 6 | 2.11% | 1 | 25.00% | 
| Mattias Wallin | 1 | 0.35% | 1 | 25.00% | 
| Total | 284 | 100.00% | 4 | 100.00% | 
static int mask_and_set_register_interruptible(struct device *dev, u8 bank,
	u8 reg, u8 bitmask, u8 bitvalues)
{
	struct ab3100 *ab3100 = dev_get_drvdata(dev->parent);
	return ab3100_mask_and_set_register_interruptible(ab3100,
			reg, bitmask, (bitmask & bitvalues));
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp | 
| Mattias Wallin | 48 | 94.12% | 1 | 33.33% | 
| Linus Walleij | 3 | 5.88% | 2 | 66.67% | 
| Total | 51 | 100.00% | 3 | 100.00% | 
/*
 * Register a simple callback for handling any AB3100 events.
 */
int ab3100_event_register(struct ab3100 *ab3100,
			  struct notifier_block *nb)
{
	return blocking_notifier_chain_register(&ab3100->event_subscribers,
					       nb);
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp | 
| Linus Walleij | 26 | 100.00% | 1 | 100.00% | 
| Total | 26 | 100.00% | 1 | 100.00% | 
EXPORT_SYMBOL(ab3100_event_register);
/*
 * Remove a previously registered callback.
 */
int ab3100_event_unregister(struct ab3100 *ab3100,
			    struct notifier_block *nb)
{
	return blocking_notifier_chain_unregister(&ab3100->event_subscribers,
					    nb);
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp | 
| Linus Walleij | 26 | 100.00% | 1 | 100.00% | 
| Total | 26 | 100.00% | 1 | 100.00% | 
EXPORT_SYMBOL(ab3100_event_unregister);
static int ab3100_event_registers_startup_state_get(struct device *dev,
					     u8 *event)
{
	struct ab3100 *ab3100 = dev_get_drvdata(dev->parent);
	if (!ab3100->startup_events_read)
		return -EAGAIN; /* Try again later */
	memcpy(event, ab3100->startup_events, 3);
	return 0;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp | 
| Linus Walleij | 29 | 54.72% | 1 | 50.00% | 
| Mattias Wallin | 24 | 45.28% | 1 | 50.00% | 
| Total | 53 | 100.00% | 2 | 100.00% | 
static struct abx500_ops ab3100_ops = {
	.get_chip_id = ab3100_get_chip_id,
	.set_register = set_register_interruptible,
	.get_register = get_register_interruptible,
	.get_register_page = get_register_page_interruptible,
	.set_register_page = NULL,
	.mask_and_set_register = mask_and_set_register_interruptible,
	.event_registers_startup_state_get =
		ab3100_event_registers_startup_state_get,
	.startup_irq_enabled = NULL,
};
/*
 * This is a threaded interrupt handler so we can make some
 * I2C calls etc.
 */
static irqreturn_t ab3100_irq_handler(int irq, void *data)
{
	struct ab3100 *ab3100 = data;
	u8 event_regs[3];
	u32 fatevent;
	int err;
	err = ab3100_get_register_page_interruptible(ab3100, AB3100_EVENTA1,
				       event_regs, 3);
	if (err)
		goto err_event;
	fatevent = (event_regs[0] << 16) |
		(event_regs[1] << 8) |
		event_regs[2];
	if (!ab3100->startup_events_read) {
		ab3100->startup_events[0] = event_regs[0];
		ab3100->startup_events[1] = event_regs[1];
		ab3100->startup_events[2] = event_regs[2];
		ab3100->startup_events_read = true;
	}
	/*
         * The notified parties will have to mask out the events
         * they're interested in and react to them. They will be
         * notified on all events, then they use the fatevent value
         * to determine if they're interested.
         */
	blocking_notifier_call_chain(&ab3100->event_subscribers,
				     fatevent, NULL);
	dev_dbg(ab3100->dev,
		"IRQ Event: 0x%08x\n", fatevent);
	return IRQ_HANDLED;
 err_event:
	dev_dbg(ab3100->dev,
		"error reading event status\n");
	return IRQ_HANDLED;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp | 
| Linus Walleij | 138 | 81.66% | 3 | 75.00% | 
| Mattias Wallin | 31 | 18.34% | 1 | 25.00% | 
| Total | 169 | 100.00% | 4 | 100.00% | 
#ifdef CONFIG_DEBUG_FS
/*
 * Some debugfs entries only exposed if we're using debug
 */
static int ab3100_registers_print(struct seq_file *s, void *p)
{
	struct ab3100 *ab3100 = s->private;
	u8 value;
	u8 reg;
	seq_puts(s, "AB3100 registers:\n");
	for (reg = 0; reg < 0xff; reg++) {
		ab3100_get_register_interruptible(ab3100, reg, &value);
		seq_printf(s, "[0x%x]:  0x%x\n", reg, value);
	}
	return 0;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp | 
| Linus Walleij | 75 | 98.68% | 2 | 66.67% | 
| Lee Jones | 1 | 1.32% | 1 | 33.33% | 
| Total | 76 | 100.00% | 3 | 100.00% | 
static int ab3100_registers_open(struct inode *inode, struct file *file)
{
	return single_open(file, ab3100_registers_print, inode->i_private);
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp | 
| Linus Walleij | 28 | 100.00% | 1 | 100.00% | 
| Total | 28 | 100.00% | 1 | 100.00% | 
static const struct file_operations ab3100_registers_fops = {
	.open = ab3100_registers_open,
	.read = seq_read,
	.llseek = seq_lseek,
	.release = single_release,
	.owner = THIS_MODULE,
};
struct ab3100_get_set_reg_priv {
	
struct ab3100 *ab3100;
	
bool mode;
};
static ssize_t ab3100_get_set_reg(struct file *file,
				  const char __user *user_buf,
				  size_t count, loff_t *ppos)
{
	struct ab3100_get_set_reg_priv *priv = file->private_data;
	struct ab3100 *ab3100 = priv->ab3100;
	char buf[32];
	ssize_t buf_size;
	int regp;
	u8 user_reg;
	int err;
	int i = 0;
	/* Get userspace string and assure termination */
	buf_size = min(count, (sizeof(buf)-1));
	if (copy_from_user(buf, user_buf, buf_size))
		return -EFAULT;
	buf[buf_size] = 0;
	/*
         * The idea is here to parse a string which is either
         * "0xnn" for reading a register, or "0xaa 0xbb" for
         * writing 0xbb to the register 0xaa. First move past
         * whitespace and then begin to parse the register.
         */
	while ((i < buf_size) && (buf[i] == ' '))
		i++;
	regp = i;
	/*
         * Advance pointer to end of string then terminate
         * the register string. This is needed to satisfy
         * the kstrtou8() function.
         */
	while ((i < buf_size) && (buf[i] != ' '))
		i++;
	buf[i] = '\0';
	err = kstrtou8(&buf[regp], 16, &user_reg);
	if (err)
		return err;
	/* Either we read or we write a register here */
	if (!priv->mode) {
		/* Reading */
		u8 regvalue;
		ab3100_get_register_interruptible(ab3100, user_reg, ®value);
		dev_info(ab3100->dev,
			 "debug read AB3100 reg[0x%02x]: 0x%02x\n",
			 user_reg, regvalue);
	} else {
		int valp;
		u8 user_value;
		u8 regvalue;
		/*
                 * Writing, we need some value to write to
                 * the register so keep parsing the string
                 * from userspace.
                 */
		i++;
		while ((i < buf_size) && (buf[i] == ' '))
			i++;
		valp = i;
		while ((i < buf_size) && (buf[i] != ' '))
			i++;
		buf[i] = '\0';
		err = kstrtou8(&buf[valp], 16, &user_value);
		if (err)
			return err;
		ab3100_set_register_interruptible(ab3100, user_reg, user_value);
		ab3100_get_register_interruptible(ab3100, user_reg, ®value);
		dev_info(ab3100->dev,
			 "debug write reg[0x%02x]\n"
			 "  with 0x%02x, after readback: 0x%02x\n",
			 user_reg, user_value, regvalue);
	}
	return buf_size;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp | 
| Linus Walleij | 329 | 95.36% | 2 | 40.00% | 
| Jingoo Han | 12 | 3.48% | 1 | 20.00% | 
| Samuel Ortiz | 2 | 0.58% | 1 | 20.00% | 
| Lee Jones | 2 | 0.58% | 1 | 20.00% | 
| Total | 345 | 100.00% | 5 | 100.00% | 
static const struct file_operations ab3100_get_set_reg_fops = {
	.open = simple_open,
	.write = ab3100_get_set_reg,
	.llseek = noop_llseek,
};
static struct dentry *ab3100_dir;
static struct dentry *ab3100_reg_file;
static struct ab3100_get_set_reg_priv ab3100_get_priv;
static struct dentry *ab3100_get_reg_file;
static struct ab3100_get_set_reg_priv ab3100_set_priv;
static struct dentry *ab3100_set_reg_file;
static void ab3100_setup_debugfs(struct ab3100 *ab3100)
{
	int err;
	ab3100_dir = debugfs_create_dir("ab3100", NULL);
	if (!ab3100_dir)
		goto exit_no_debugfs;
	ab3100_reg_file = debugfs_create_file("registers",
				S_IRUGO, ab3100_dir, ab3100,
				&ab3100_registers_fops);
	if (!ab3100_reg_file) {
		err = -ENOMEM;
		goto exit_destroy_dir;
	}
	ab3100_get_priv.ab3100 = ab3100;
	ab3100_get_priv.mode = false;
	ab3100_get_reg_file = debugfs_create_file("get_reg",
				S_IWUSR, ab3100_dir, &ab3100_get_priv,
				&ab3100_get_set_reg_fops);
	if (!ab3100_get_reg_file) {
		err = -ENOMEM;
		goto exit_destroy_reg;
	}
	ab3100_set_priv.ab3100 = ab3100;
	ab3100_set_priv.mode = true;
	ab3100_set_reg_file = debugfs_create_file("set_reg",
				S_IWUSR, ab3100_dir, &ab3100_set_priv,
				&ab3100_get_set_reg_fops);
	if (!ab3100_set_reg_file) {
		err = -ENOMEM;
		goto exit_destroy_get_reg;
	}
	return;
 exit_destroy_get_reg:
	debugfs_remove(ab3100_get_reg_file);
 exit_destroy_reg:
	debugfs_remove(ab3100_reg_file);
 exit_destroy_dir:
	debugfs_remove(ab3100_dir);
 exit_no_debugfs:
	return;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp | 
| Linus Walleij | 173 | 98.86% | 1 | 50.00% | 
| Vasiliy Kulikov | 2 | 1.14% | 1 | 50.00% | 
| Total | 175 | 100.00% | 2 | 100.00% | 
#else
static inline void ab3100_setup_debugfs(struct ab3100 *ab3100)
{
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp | 
| Linus Walleij | 11 | 100.00% | 1 | 100.00% | 
| Total | 11 | 100.00% | 1 | 100.00% | 
#endif
/*
 * Basic set-up, datastructure creation/destruction and I2C interface.
 * This sets up a default config in the AB3100 chip so that it
 * will work as expected.
 */
struct ab3100_init_setting {
	
u8 abreg;
	
u8 setting;
};
static const struct ab3100_init_setting ab3100_init_settings[] = {
	{
		.abreg = AB3100_MCA,
		.setting = 0x01
	}, {
		.abreg = AB3100_MCB,
		.setting = 0x30
	}, {
		.abreg = AB3100_IMRA1,
		.setting = 0x00
	}, {
		.abreg = AB3100_IMRA2,
		.setting = 0xFF
	}, {
		.abreg = AB3100_IMRA3,
		.setting = 0x01
	}, {
		.abreg = AB3100_IMRB1,
		.setting = 0xBF
	}, {
		.abreg = AB3100_IMRB2,
		.setting = 0xFF
	}, {
		.abreg = AB3100_IMRB3,
		.setting = 0xFF
	}, {
		.abreg = AB3100_SUP,
		.setting = 0x00
	}, {
		.abreg = AB3100_DIS,
		.setting = 0xF0
	}, {
		.abreg = AB3100_D0C,
		.setting = 0x00
	}, {
		.abreg = AB3100_D1C,
		.setting = 0x00
	}, {
		.abreg = AB3100_D2C,
		.setting = 0x00
	}, {
		.abreg = AB3100_D3C,
		.setting = 0x00
	},
};
static int ab3100_setup(struct ab3100 *ab3100)
{
	int err = 0;
	int i;
	for (i = 0; i < ARRAY_SIZE(ab3100_init_settings); i++) {
		err = ab3100_set_register_interruptible(ab3100,
					  ab3100_init_settings[i].abreg,
					  ab3100_init_settings[i].setting);
		if (err)
			goto exit_no_setup;
	}
	/*
         * Special trick to make the AB3100 use the 32kHz clock (RTC)
         * bit 3 in test register 0x02 is a special, undocumented test
         * register bit that only exist in AB3100 P1E
         */
	if (ab3100->chip_id == 0xc4) {
		dev_warn(ab3100->dev,
			 "AB3100 P1E variant detected forcing chip to 32KHz\n");
		err = ab3100_set_test_register_interruptible(ab3100,
			0x02, 0x08);
	}
 exit_no_setup:
	return err;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp | 
| Linus Walleij | 100 | 99.01% | 2 | 66.67% | 
| Lee Jones | 1 | 0.99% | 1 | 33.33% | 
| Total | 101 | 100.00% | 3 | 100.00% | 
/* The subdevices of the AB3100 */
static struct mfd_cell ab3100_devs[] = {
	{
		.name = "ab3100-dac",
		.id = -1,
        },
	{
		.name = "ab3100-leds",
		.id = -1,
        },
	{
		.name = "ab3100-power",
		.id = -1,
        },
	{
		.name = "ab3100-regulators",
		.of_compatible = "stericsson,ab3100-regulators",
		.id = -1,
        },
	{
		.name = "ab3100-sim",
		.id = -1,
        },
	{
		.name = "ab3100-uart",
		.id = -1,
        },
	{
		.name = "ab3100-rtc",
		.id = -1,
        },
	{
		.name = "ab3100-charger",
		.id = -1,
        },
	{
		.name = "ab3100-boost",
		.id = -1,
        },
	{
		.name = "ab3100-adc",
		.id = -1,
        },
	{
		.name = "ab3100-fuelgauge",
		.id = -1,
        },
	{
		.name = "ab3100-vibrator",
		.id = -1,
        },
	{
		.name = "ab3100-otp",
		.id = -1,
        },
	{
		.name = "ab3100-codec",
		.id = -1,
        },
};
struct ab_family_id {
	
u8	id;
	
char	*name;
};
static const struct ab_family_id ids[] = {
	/* AB3100 */
	{
		.id = 0xc0,
		.name = "P1A"
	}, {
		.id = 0xc1,
		.name = "P1B"
	}, {
		.id = 0xc2,
		.name = "P1C"
	}, {
		.id = 0xc3,
		.name = "P1D"
	}, {
		.id = 0xc4,
		.name = "P1E"
	}, {
		.id = 0xc5,
		.name = "P1F/R1A"
	}, {
		.id = 0xc6,
		.name = "P1G/R1A"
	}, {
		.id = 0xc7,
		.name = "P2A/R2A"
	}, {
		.id = 0xc8,
		.name = "P2B/R2B"
	},
	/* AB3000 variants, not supported */
	{
		.id = 0xa0
	}, {
		.id = 0xa1
	}, {
		.id = 0xa2
	}, {
		.id = 0xa3
	}, {
		.id = 0xa4
	}, {
		.id = 0xa5
	}, {
		.id = 0xa6
	}, {
		.id = 0xa7
	},
	/* Terminator */
	{
		.id = 0x00,
        },
};
static int ab3100_probe(struct i2c_client *client,
				  const struct i2c_device_id *id)
{
	struct ab3100 *ab3100;
	struct ab3100_platform_data *ab3100_plf_data =
		dev_get_platdata(&client->dev);
	int err;
	int i;
	ab3100 = devm_kzalloc(&client->dev, sizeof(struct ab3100), GFP_KERNEL);
	if (!ab3100)
		return -ENOMEM;
	/* Initialize data structure */
	mutex_init(&ab3100->access_mutex);
	BLOCKING_INIT_NOTIFIER_HEAD(&ab3100->event_subscribers);
	ab3100->i2c_client = client;
	ab3100->dev = &ab3100->i2c_client->dev;
	i2c_set_clientdata(client, ab3100);
	/* Read chip ID register */
	err = ab3100_get_register_interruptible(ab3100, AB3100_CID,
						&ab3100->chip_id);
	if (err) {
		dev_err(&client->dev,
			"failed to communicate with AB3100 chip\n");
		goto exit_no_detect;
	}
	for (i = 0; ids[i].id != 0x0; i++) {
		if (ids[i].id == ab3100->chip_id) {
			if (ids[i].name)
				break;
			dev_err(&client->dev, "AB3000 is not supported\n");
			goto exit_no_detect;
		}
	}
	snprintf(&ab3100->chip_name[0],
		 sizeof(ab3100->chip_name) - 1, "AB3100 %s", ids[i].name);
	if (ids[i].id == 0x0) {
		dev_err(&client->dev, "unknown analog baseband chip id: 0x%x\n",
			ab3100->chip_id);
		dev_err(&client->dev,
			"accepting it anyway. Please update the driver.\n");
		goto exit_no_detect;
	}
	dev_info(&client->dev, "Detected chip: %s\n",
		 &ab3100->chip_name[0]);
	/* Attach a second dummy i2c_client to the test register address */
	ab3100->testreg_client = i2c_new_dummy(client->adapter,
					       client->addr + 1);
	if (!ab3100->testreg_client) {
		err = -ENOMEM;
		goto exit_no_testreg_client;
	}
	err = ab3100_setup(ab3100);
	if (err)
		goto exit_no_setup;
	err = devm_request_threaded_irq(&client->dev,
					client->irq, NULL, ab3100_irq_handler,
					IRQF_ONESHOT, "ab3100-core", ab3100);
	if (err)
		goto exit_no_irq;
	err = abx500_register_ops(&client->dev, &ab3100_ops);
	if (err)
		goto exit_no_ops;
	/* Set up and register the platform devices. */
	for (i = 0; i < ARRAY_SIZE(ab3100_devs); i++) {
		ab3100_devs[i].platform_data = ab3100_plf_data;
		ab3100_devs[i].pdata_size = sizeof(struct ab3100_platform_data);
	}
	err = mfd_add_devices(&client->dev, 0, ab3100_devs,
			      ARRAY_SIZE(ab3100_devs), NULL, 0, NULL);
	ab3100_setup_debugfs(ab3100);
	return 0;
 exit_no_ops:
 exit_no_irq:
 exit_no_setup:
	i2c_unregister_device(ab3100->testreg_client);
 exit_no_testreg_client:
 exit_no_detect:
	return err;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp | 
| Linus Walleij | 420 | 87.14% | 6 | 50.00% | 
| Mattias Wallin | 22 | 4.56% | 1 | 8.33% | 
| Lee Jones | 18 | 3.73% | 2 | 16.67% | 
| Samuel Ortiz | 16 | 3.32% | 1 | 8.33% | 
| Jingoo Han | 4 | 0.83% | 1 | 8.33% | 
| Mark Brown | 2 | 0.41% | 1 | 8.33% | 
| Total | 482 | 100.00% | 12 | 100.00% | 
static const struct i2c_device_id ab3100_id[] = {
	{ "ab3100", 0 },
	{ }
};
static struct i2c_driver ab3100_driver = {
	.driver = {
		.name			= "ab3100",
		.suppress_bind_attrs	= true,
        },
	.id_table	= ab3100_id,
	.probe		= ab3100_probe,
};
static int __init ab3100_i2c_init(void)
{
	return i2c_add_driver(&ab3100_driver);
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp | 
| Linus Walleij | 16 | 100.00% | 1 | 100.00% | 
| Total | 16 | 100.00% | 1 | 100.00% | 
subsys_initcall(ab3100_i2c_init);
Overall Contributors
| Person | Tokens | Prop | Commits | CommitProp | 
| Linus Walleij | 3188 | 88.43% | 11 | 40.74% | 
| Mattias Wallin | 318 | 8.82% | 1 | 3.70% | 
| Lee Jones | 40 | 1.11% | 2 | 7.41% | 
| Samuel Ortiz | 18 | 0.50% | 2 | 7.41% | 
| Jingoo Han | 16 | 0.44% | 2 | 7.41% | 
| Paul Gortmaker | 8 | 0.22% | 2 | 7.41% | 
| Arnd Bergmann | 5 | 0.14% | 1 | 3.70% | 
| Tejun Heo | 3 | 0.08% | 1 | 3.70% | 
| Marcus Cooper | 3 | 0.08% | 1 | 3.70% | 
| Vasiliy Kulikov | 2 | 0.06% | 1 | 3.70% | 
| Mark Brown | 2 | 0.06% | 1 | 3.70% | 
| Stephen Boyd | 1 | 0.03% | 1 | 3.70% | 
| Jean Delvare | 1 | 0.03% | 1 | 3.70% | 
| Bill Pemberton |  | 0.00% | 0 | 0.00% | 
| Total | 3605 | 100.00% | 27 | 100.00% | 
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.