Release 4.12 drivers/staging/iio/accel/adis16209.c

/*
 * ADIS16209 Dual-Axis Digital Inclinometer and Accelerometer
 *
 * Copyright 2010 Analog Devices Inc.
 *
 * Licensed under the GPL-2 or later.
 */

#include <linux/delay.h>
#include <linux/device.h>
#include <linux/kernel.h>
#include <linux/spi/spi.h>
#include <linux/slab.h>
#include <linux/sysfs.h>
#include <linux/list.h>
#include <linux/module.h>

#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>
#include <linux/iio/buffer.h>
#include <linux/iio/imu/adis.h>


#define ADIS16209_STARTUP_DELAY	220 
/* ms */

/* Flash memory write count */

#define ADIS16209_FLASH_CNT      0x00

/* Output, power supply */

#define ADIS16209_SUPPLY_OUT     0x02

/* Output, x-axis accelerometer */

#define ADIS16209_XACCL_OUT      0x04

/* Output, y-axis accelerometer */

#define ADIS16209_YACCL_OUT      0x06

/* Output, auxiliary ADC input */

#define ADIS16209_AUX_ADC        0x08

/* Output, temperature */

#define ADIS16209_TEMP_OUT       0x0A

/* Output, x-axis inclination */

#define ADIS16209_XINCL_OUT      0x0C

/* Output, y-axis inclination */

#define ADIS16209_YINCL_OUT      0x0E

/* Output, +/-180 vertical rotational position */

#define ADIS16209_ROT_OUT        0x10

/* Calibration, x-axis acceleration offset null */

#define ADIS16209_XACCL_NULL     0x12

/* Calibration, y-axis acceleration offset null */

#define ADIS16209_YACCL_NULL     0x14

/* Calibration, x-axis inclination offset null */

#define ADIS16209_XINCL_NULL     0x16

/* Calibration, y-axis inclination offset null */

#define ADIS16209_YINCL_NULL     0x18

/* Calibration, vertical rotation offset null */

#define ADIS16209_ROT_NULL       0x1A

/* Alarm 1 amplitude threshold */

#define ADIS16209_ALM_MAG1       0x20

/* Alarm 2 amplitude threshold */

#define ADIS16209_ALM_MAG2       0x22

/* Alarm 1, sample period */

#define ADIS16209_ALM_SMPL1      0x24

/* Alarm 2, sample period */

#define ADIS16209_ALM_SMPL2      0x26

/* Alarm control */

#define ADIS16209_ALM_CTRL       0x28

/* Auxiliary DAC data */

#define ADIS16209_AUX_DAC        0x30

/* General-purpose digital input/output control */

#define ADIS16209_GPIO_CTRL      0x32

/* Miscellaneous control */

#define ADIS16209_MSC_CTRL       0x34

/* Internal sample period (rate) control */

#define ADIS16209_SMPL_PRD       0x36

/* Operation, filter configuration */

#define ADIS16209_AVG_CNT        0x38

/* Operation, sleep mode control */

#define ADIS16209_SLP_CNT        0x3A

/* Diagnostics, system status register */

#define ADIS16209_DIAG_STAT      0x3C

/* Operation, system command register */

#define ADIS16209_GLOB_CMD       0x3E

/* MSC_CTRL */

/* Self-test at power-on: 1 = disabled, 0 = enabled */

#define ADIS16209_MSC_CTRL_PWRUP_SELF_TEST	BIT(10)

/* Self-test enable */

#define ADIS16209_MSC_CTRL_SELF_TEST_EN	        BIT(8)

/* Data-ready enable: 1 = enabled, 0 = disabled */

#define ADIS16209_MSC_CTRL_DATA_RDY_EN	        BIT(2)

/* Data-ready polarity: 1 = active high, 0 = active low */

#define ADIS16209_MSC_CTRL_ACTIVE_HIGH	        BIT(1)

/* Data-ready line selection: 1 = DIO2, 0 = DIO1 */

#define ADIS16209_MSC_CTRL_DATA_RDY_DIO2	BIT(0)

/* DIAG_STAT */

/* Alarm 2 status: 1 = alarm active, 0 = alarm inactive */

#define ADIS16209_DIAG_STAT_ALARM2        BIT(9)

/* Alarm 1 status: 1 = alarm active, 0 = alarm inactive */

#define ADIS16209_DIAG_STAT_ALARM1        BIT(8)

/* Self-test diagnostic error flag: 1 = error condition, 0 = normal operation */

#define ADIS16209_DIAG_STAT_SELFTEST_FAIL_BIT	5

/* SPI communications failure */

#define ADIS16209_DIAG_STAT_SPI_FAIL_BIT	3

/* Flash update failure */

#define ADIS16209_DIAG_STAT_FLASH_UPT_BIT	2

/* Power supply above 3.625 V */

#define ADIS16209_DIAG_STAT_POWER_HIGH_BIT	1

/* Power supply below 3.15 V */

#define ADIS16209_DIAG_STAT_POWER_LOW_BIT	0

/* GLOB_CMD */


#define ADIS16209_GLOB_CMD_SW_RESET	BIT(7)

#define ADIS16209_GLOB_CMD_CLEAR_STAT	BIT(4)

#define ADIS16209_GLOB_CMD_FACTORY_CAL	BIT(1)


#define ADIS16209_ERROR_ACTIVE          BIT(14)


enum adis16209_scan {
	
ADIS16209_SCAN_SUPPLY,
	
ADIS16209_SCAN_ACC_X,
	
ADIS16209_SCAN_ACC_Y,
	
ADIS16209_SCAN_AUX_ADC,
	
ADIS16209_SCAN_TEMP,
	
ADIS16209_SCAN_INCLI_X,
	
ADIS16209_SCAN_INCLI_Y,
	
ADIS16209_SCAN_ROT,
};


static const u8 adis16209_addresses[8][1] = {
	[ADIS16209_SCAN_SUPPLY] = { },
	[ADIS16209_SCAN_AUX_ADC] = { },
	[ADIS16209_SCAN_ACC_X] = { ADIS16209_XACCL_NULL },
	[ADIS16209_SCAN_ACC_Y] = { ADIS16209_YACCL_NULL },
	[ADIS16209_SCAN_INCLI_X] = { ADIS16209_XINCL_NULL },
	[ADIS16209_SCAN_INCLI_Y] = { ADIS16209_YINCL_NULL },
	[ADIS16209_SCAN_ROT] = { },
	[ADIS16209_SCAN_TEMP] = { },
};



static int adis16209_write_raw(struct iio_dev *indio_dev,
			       struct iio_chan_spec const *chan,
			       int val,
			       int val2,
			       long mask)
{
	struct adis *st = iio_priv(indio_dev);
	int bits;
	s16 val16;
	u8 addr;

	switch (mask) {
	case IIO_CHAN_INFO_CALIBBIAS:
		switch (chan->type) {
		case IIO_ACCEL:
		case IIO_INCLI:
			bits = 14;
			break;
		default:
			return -EINVAL;
		}
		val16 = val & ((1 << bits) - 1);
		addr = adis16209_addresses[chan->scan_index][0];
		return adis_write_reg_16(st, addr, val16);
	}
	return -EINVAL;
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
Jonathan Cameron
85
72.03%
2
50.00%
Barry Song
19
16.10%
1
25.00%
Lars-Peter Clausen
14
11.86%
1
25.00%
Total
118
100.00%
4
100.00%



static int adis16209_read_raw(struct iio_dev *indio_dev,
			      struct iio_chan_spec const *chan,
			      int *val, int *val2,
			      long mask)
{
	struct adis *st = iio_priv(indio_dev);
	int ret;
	int bits;
	u8 addr;
	s16 val16;

	switch (mask) {
	case IIO_CHAN_INFO_RAW:
		return adis_single_conversion(indio_dev, chan,
			ADIS16209_ERROR_ACTIVE, val);
	case IIO_CHAN_INFO_SCALE:
		switch (chan->type) {
		case IIO_VOLTAGE:
			*val = 0;
			if (chan->channel == 0)
				*val2 = 305180; /* 0.30518 mV */
			else
				*val2 = 610500; /* 0.6105 mV */
			return IIO_VAL_INT_PLUS_MICRO;
		case IIO_TEMP:
			*val = -470; /* -0.47 C */
			*val2 = 0;
			return IIO_VAL_INT_PLUS_MICRO;
		case IIO_ACCEL:
			*val = 0;
			*val2 = IIO_G_TO_M_S_2(244140); /* 0.244140 mg */
			return IIO_VAL_INT_PLUS_NANO;
		case IIO_INCLI:
		case IIO_ROT:
			*val = 0;
			*val2 = 25000; /* 0.025 degree */
			return IIO_VAL_INT_PLUS_MICRO;
		default:
			return -EINVAL;
		}
		break;
	case IIO_CHAN_INFO_OFFSET:
		*val = 25000 / -470 - 0x4FE; /* 25 C = 0x4FE */
		return IIO_VAL_INT;
	case IIO_CHAN_INFO_CALIBBIAS:
		switch (chan->type) {
		case IIO_ACCEL:
			bits = 14;
			break;
		default:
			return -EINVAL;
		}
		addr = adis16209_addresses[chan->scan_index][0];
		ret = adis_read_reg_16(st, addr, &val16);
		if (ret)
			return ret;
		val16 &= (1 << bits) - 1;
		val16 = (s16)(val16 << (16 - bits)) >> (16 - bits);
		*val = val16;
		return IIO_VAL_INT;
	}
	return -EINVAL;
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
Jonathan Cameron
218
74.40%
4
57.14%
Lars-Peter Clausen
42
14.33%
2
28.57%
Barry Song
33
11.26%
1
14.29%
Total
293
100.00%
7
100.00%


static const struct iio_chan_spec adis16209_channels[] = {
	ADIS_SUPPLY_CHAN(ADIS16209_SUPPLY_OUT, ADIS16209_SCAN_SUPPLY, 0, 14),
	ADIS_TEMP_CHAN(ADIS16209_TEMP_OUT, ADIS16209_SCAN_TEMP, 0, 12),
	ADIS_ACCEL_CHAN(X, ADIS16209_XACCL_OUT, ADIS16209_SCAN_ACC_X,
			BIT(IIO_CHAN_INFO_CALIBBIAS), 0, 14),
	ADIS_ACCEL_CHAN(Y, ADIS16209_YACCL_OUT, ADIS16209_SCAN_ACC_Y,
			BIT(IIO_CHAN_INFO_CALIBBIAS), 0, 14),
	ADIS_AUX_ADC_CHAN(ADIS16209_AUX_ADC, ADIS16209_SCAN_AUX_ADC, 0, 12),
	ADIS_INCLI_CHAN(X, ADIS16209_XINCL_OUT, ADIS16209_SCAN_INCLI_X,
			0, 0, 14),
	ADIS_INCLI_CHAN(Y, ADIS16209_YINCL_OUT, ADIS16209_SCAN_INCLI_Y,
			0, 0, 14),
	ADIS_ROT_CHAN(X, ADIS16209_ROT_OUT, ADIS16209_SCAN_ROT, 0, 0, 14),
	IIO_CHAN_SOFT_TIMESTAMP(8)
};


static const struct iio_info adis16209_info = {
	.read_raw = adis16209_read_raw,
	.write_raw = adis16209_write_raw,
	.update_scan_mode = adis_update_scan_mode,
	.driver_module = THIS_MODULE,
};


static const char * const adis16209_status_error_msgs[] = {
	[ADIS16209_DIAG_STAT_SELFTEST_FAIL_BIT] = "Self test failure",
	[ADIS16209_DIAG_STAT_SPI_FAIL_BIT] = "SPI failure",
	[ADIS16209_DIAG_STAT_FLASH_UPT_BIT] = "Flash update failed",
	[ADIS16209_DIAG_STAT_POWER_HIGH_BIT] = "Power supply above 3.625V",
	[ADIS16209_DIAG_STAT_POWER_LOW_BIT] = "Power supply below 3.15V",
};


static const struct adis_data adis16209_data = {
	.read_delay = 30,
	.msc_ctrl_reg = ADIS16209_MSC_CTRL,
	.glob_cmd_reg = ADIS16209_GLOB_CMD,
	.diag_stat_reg = ADIS16209_DIAG_STAT,

	.self_test_mask = ADIS16209_MSC_CTRL_SELF_TEST_EN,
	.self_test_no_autoclear = true,
	.startup_delay = ADIS16209_STARTUP_DELAY,

	.status_error_msgs = adis16209_status_error_msgs,
	.status_error_mask = BIT(ADIS16209_DIAG_STAT_SELFTEST_FAIL_BIT) |
		BIT(ADIS16209_DIAG_STAT_SPI_FAIL_BIT) |
		BIT(ADIS16209_DIAG_STAT_FLASH_UPT_BIT) |
		BIT(ADIS16209_DIAG_STAT_POWER_HIGH_BIT) |
		BIT(ADIS16209_DIAG_STAT_POWER_LOW_BIT),
};



static int adis16209_probe(struct spi_device *spi)
{
	int ret;
	struct adis *st;
	struct iio_dev *indio_dev;

	/* setup the industrialio driver allocated elements */
	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
	if (!indio_dev)
		return -ENOMEM;
	st = iio_priv(indio_dev);
	/* this is only used for removal purposes */
	spi_set_drvdata(spi, indio_dev);

	indio_dev->name = spi->dev.driver->name;
	indio_dev->dev.parent = &spi->dev;
	indio_dev->info = &adis16209_info;
	indio_dev->channels = adis16209_channels;
	indio_dev->num_channels = ARRAY_SIZE(adis16209_channels);
	indio_dev->modes = INDIO_DIRECT_MODE;

	ret = adis_init(st, indio_dev, spi, &adis16209_data);
	if (ret)
		return ret;
	ret = adis_setup_buffer_and_trigger(st, indio_dev, NULL);
	if (ret)
		return ret;

	/* Get the device into a sane initial state */
	ret = adis_initial_startup(st);
	if (ret)
		goto error_cleanup_buffer_trigger;
	ret = iio_device_register(indio_dev);
	if (ret)
		goto error_cleanup_buffer_trigger;

	return 0;

error_cleanup_buffer_trigger:
	adis_cleanup_buffer_and_trigger(st, indio_dev);
	return ret;
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
Barry Song
106
53.27%
1
11.11%
Jonathan Cameron
58
29.15%
6
66.67%
Lars-Peter Clausen
20
10.05%
1
11.11%
Sachin Kamat
15
7.54%
1
11.11%
Total
199
100.00%
9
100.00%



static int adis16209_remove(struct spi_device *spi)
{
	struct iio_dev *indio_dev = spi_get_drvdata(spi);
	struct adis *st = iio_priv(indio_dev);

	iio_device_unregister(indio_dev);
	adis_cleanup_buffer_and_trigger(st, indio_dev);

	return 0;
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
Barry Song
33
71.74%
1
33.33%
Lars-Peter Clausen
11
23.91%
1
33.33%
Jonathan Cameron
2
4.35%
1
33.33%
Total
46
100.00%
3
100.00%


static struct spi_driver adis16209_driver = {
	.driver = {
		.name = "adis16209",
        },
	.probe = adis16209_probe,
	.remove = adis16209_remove,
};

module_spi_driver(adis16209_driver);

MODULE_AUTHOR("Barry Song <21cnbao@gmail.com>");
MODULE_DESCRIPTION("Analog Devices ADIS16209 Dual-Axis Digital Inclinometer and Accelerometer");
MODULE_LICENSE("GPL v2");
MODULE_ALIAS("spi:adis16209");
Overall Contributors
Person
Tokens
Prop
Commits
CommitProp
Jonathan Cameron
516
38.94%
13
46.43%
Lars-Peter Clausen
284
21.43%
8
28.57%
Barry Song
263
19.85%
1
3.57%
Narcisa Ana Maria Vasile
239
18.04%
2
7.14%
Sachin Kamat
15
1.13%
1
3.57%
Paul Gortmaker
3
0.23%
1
3.57%
Mike Frysinger
3
0.23%
1
3.57%
Reto Schneider
2
0.15%
1
3.57%
Total
1325
100.00%
28
100.00%
Directory: drivers/staging/iio/accel

Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.