cregit-Linux how code gets into the kernel

Release 4.12 include/crypto/aead.h

Directory: include/crypto
/*
 * AEAD: Authenticated Encryption with Associated Data
 * 
 * Copyright (c) 2007-2015 Herbert Xu <herbert@gondor.apana.org.au>
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of the GNU General Public License as published by the Free
 * Software Foundation; either version 2 of the License, or (at your option) 
 * any later version.
 *
 */

#ifndef _CRYPTO_AEAD_H

#define _CRYPTO_AEAD_H

#include <linux/crypto.h>
#include <linux/kernel.h>
#include <linux/slab.h>

/**
 * DOC: Authenticated Encryption With Associated Data (AEAD) Cipher API
 *
 * The AEAD cipher API is used with the ciphers of type CRYPTO_ALG_TYPE_AEAD
 * (listed as type "aead" in /proc/crypto)
 *
 * The most prominent examples for this type of encryption is GCM and CCM.
 * However, the kernel supports other types of AEAD ciphers which are defined
 * with the following cipher string:
 *
 *      authenc(keyed message digest, block cipher)
 *
 * For example: authenc(hmac(sha256), cbc(aes))
 *
 * The example code provided for the symmetric key cipher operation
 * applies here as well. Naturally all *skcipher* symbols must be exchanged
 * the *aead* pendants discussed in the following. In addition, for the AEAD
 * operation, the aead_request_set_ad function must be used to set the
 * pointer to the associated data memory location before performing the
 * encryption or decryption operation. In case of an encryption, the associated
 * data memory is filled during the encryption operation. For decryption, the
 * associated data memory must contain data that is used to verify the integrity
 * of the decrypted data. Another deviation from the asynchronous block cipher
 * operation is that the caller should explicitly check for -EBADMSG of the
 * crypto_aead_decrypt. That error indicates an authentication error, i.e.
 * a breach in the integrity of the message. In essence, that -EBADMSG error
 * code is the key bonus an AEAD cipher has over "standard" block chaining
 * modes.
 *
 * Memory Structure:
 *
 * To support the needs of the most prominent user of AEAD ciphers, namely
 * IPSEC, the AEAD ciphers have a special memory layout the caller must adhere
 * to.
 *
 * The scatter list pointing to the input data must contain:
 *
 * * for RFC4106 ciphers, the concatenation of
 *   associated authentication data || IV || plaintext or ciphertext. Note, the
 *   same IV (buffer) is also set with the aead_request_set_crypt call. Note,
 *   the API call of aead_request_set_ad must provide the length of the AAD and
 *   the IV. The API call of aead_request_set_crypt only points to the size of
 *   the input plaintext or ciphertext.
 *
 * * for "normal" AEAD ciphers, the concatenation of
 *   associated authentication data || plaintext or ciphertext.
 *
 * It is important to note that if multiple scatter gather list entries form
 * the input data mentioned above, the first entry must not point to a NULL
 * buffer. If there is any potential where the AAD buffer can be NULL, the
 * calling code must contain a precaution to ensure that this does not result
 * in the first scatter gather list entry pointing to a NULL buffer.
 */

struct crypto_aead;

/**
 *      struct aead_request - AEAD request
 *      @base: Common attributes for async crypto requests
 *      @assoclen: Length in bytes of associated data for authentication
 *      @cryptlen: Length of data to be encrypted or decrypted
 *      @iv: Initialisation vector
 *      @src: Source data
 *      @dst: Destination data
 *      @__ctx: Start of private context data
 */

struct aead_request {
	
struct crypto_async_request base;

	
unsigned int assoclen;
	
unsigned int cryptlen;

	
u8 *iv;

	
struct scatterlist *src;
	
struct scatterlist *dst;

	
void *__ctx[] CRYPTO_MINALIGN_ATTR;
};

/**
 * struct aead_alg - AEAD cipher definition
 * @maxauthsize: Set the maximum authentication tag size supported by the
 *               transformation. A transformation may support smaller tag sizes.
 *               As the authentication tag is a message digest to ensure the
 *               integrity of the encrypted data, a consumer typically wants the
 *               largest authentication tag possible as defined by this
 *               variable.
 * @setauthsize: Set authentication size for the AEAD transformation. This
 *               function is used to specify the consumer requested size of the
 *               authentication tag to be either generated by the transformation
 *               during encryption or the size of the authentication tag to be
 *               supplied during the decryption operation. This function is also
 *               responsible for checking the authentication tag size for
 *               validity.
 * @setkey: see struct skcipher_alg
 * @encrypt: see struct skcipher_alg
 * @decrypt: see struct skcipher_alg
 * @geniv: see struct skcipher_alg
 * @ivsize: see struct skcipher_alg
 * @chunksize: see struct skcipher_alg
 * @init: Initialize the cryptographic transformation object. This function
 *        is used to initialize the cryptographic transformation object.
 *        This function is called only once at the instantiation time, right
 *        after the transformation context was allocated. In case the
 *        cryptographic hardware has some special requirements which need to
 *        be handled by software, this function shall check for the precise
 *        requirement of the transformation and put any software fallbacks
 *        in place.
 * @exit: Deinitialize the cryptographic transformation object. This is a
 *        counterpart to @init, used to remove various changes set in
 *        @init.
 * @base: Definition of a generic crypto cipher algorithm.
 *
 * All fields except @ivsize is mandatory and must be filled.
 */

struct aead_alg {
	
int (*setkey)(struct crypto_aead *tfm, const u8 *key,
	              unsigned int keylen);
	
int (*setauthsize)(struct crypto_aead *tfm, unsigned int authsize);
	
int (*encrypt)(struct aead_request *req);
	
int (*decrypt)(struct aead_request *req);
	
int (*init)(struct crypto_aead *tfm);
	
void (*exit)(struct crypto_aead *tfm);

	
const char *geniv;

	
unsigned int ivsize;
	
unsigned int maxauthsize;
	
unsigned int chunksize;

	
struct crypto_alg base;
};


struct crypto_aead {
	
unsigned int authsize;
	
unsigned int reqsize;

	
struct crypto_tfm base;
};


static inline struct crypto_aead *__crypto_aead_cast(struct crypto_tfm *tfm) { return container_of(tfm, struct crypto_aead, base); }

Contributors

PersonTokensPropCommitsCommitProp
Herbert Xu25100.00%1100.00%
Total25100.00%1100.00%

/** * crypto_alloc_aead() - allocate AEAD cipher handle * @alg_name: is the cra_name / name or cra_driver_name / driver name of the * AEAD cipher * @type: specifies the type of the cipher * @mask: specifies the mask for the cipher * * Allocate a cipher handle for an AEAD. The returned struct * crypto_aead is the cipher handle that is required for any subsequent * API invocation for that AEAD. * * Return: allocated cipher handle in case of success; IS_ERR() is true in case * of an error, PTR_ERR() returns the error code. */ struct crypto_aead *crypto_alloc_aead(const char *alg_name, u32 type, u32 mask);
static inline struct crypto_tfm *crypto_aead_tfm(struct crypto_aead *tfm) { return &tfm->base; }

Contributors

PersonTokensPropCommitsCommitProp
Herbert Xu20100.00%1100.00%
Total20100.00%1100.00%

/** * crypto_free_aead() - zeroize and free aead handle * @tfm: cipher handle to be freed */
static inline void crypto_free_aead(struct crypto_aead *tfm) { crypto_destroy_tfm(tfm, crypto_aead_tfm(tfm)); }

Contributors

PersonTokensPropCommitsCommitProp
Herbert Xu22100.00%1100.00%
Total22100.00%1100.00%


static inline struct aead_alg *crypto_aead_alg(struct crypto_aead *tfm) { return container_of(crypto_aead_tfm(tfm)->__crt_alg, struct aead_alg, base); }

Contributors

PersonTokensPropCommitsCommitProp
Herbert Xu30100.00%1100.00%
Total30100.00%1100.00%


static inline unsigned int crypto_aead_alg_ivsize(struct aead_alg *alg) { return alg->ivsize; }

Contributors

PersonTokensPropCommitsCommitProp
Herbert Xu18100.00%1100.00%
Total18100.00%1100.00%

/** * crypto_aead_ivsize() - obtain IV size * @tfm: cipher handle * * The size of the IV for the aead referenced by the cipher handle is * returned. This IV size may be zero if the cipher does not need an IV. * * Return: IV size in bytes */
static inline unsigned int crypto_aead_ivsize(struct crypto_aead *tfm) { return crypto_aead_alg_ivsize(crypto_aead_alg(tfm)); }

Contributors

PersonTokensPropCommitsCommitProp
Herbert Xu22100.00%2100.00%
Total22100.00%2100.00%

/** * crypto_aead_authsize() - obtain maximum authentication data size * @tfm: cipher handle * * The maximum size of the authentication data for the AEAD cipher referenced * by the AEAD cipher handle is returned. The authentication data size may be * zero if the cipher implements a hard-coded maximum. * * The authentication data may also be known as "tag value". * * Return: authentication data size / tag size in bytes */
static inline unsigned int crypto_aead_authsize(struct crypto_aead *tfm) { return tfm->authsize; }

Contributors

PersonTokensPropCommitsCommitProp
Herbert Xu18100.00%1100.00%
Total18100.00%1100.00%

/** * crypto_aead_blocksize() - obtain block size of cipher * @tfm: cipher handle * * The block size for the AEAD referenced with the cipher handle is returned. * The caller may use that information to allocate appropriate memory for the * data returned by the encryption or decryption operation * * Return: block size of cipher */
static inline unsigned int crypto_aead_blocksize(struct crypto_aead *tfm) { return crypto_tfm_alg_blocksize(crypto_aead_tfm(tfm)); }

Contributors

PersonTokensPropCommitsCommitProp
Herbert Xu22100.00%1100.00%
Total22100.00%1100.00%


static inline unsigned int crypto_aead_alignmask(struct crypto_aead *tfm) { return crypto_tfm_alg_alignmask(crypto_aead_tfm(tfm)); }

Contributors

PersonTokensPropCommitsCommitProp
Herbert Xu22100.00%1100.00%
Total22100.00%1100.00%


static inline u32 crypto_aead_get_flags(struct crypto_aead *tfm) { return crypto_tfm_get_flags(crypto_aead_tfm(tfm)); }

Contributors

PersonTokensPropCommitsCommitProp
Herbert Xu21100.00%1100.00%
Total21100.00%1100.00%


static inline void crypto_aead_set_flags(struct crypto_aead *tfm, u32 flags) { crypto_tfm_set_flags(crypto_aead_tfm(tfm), flags); }

Contributors

PersonTokensPropCommitsCommitProp
Herbert Xu25100.00%1100.00%
Total25100.00%1100.00%


static inline void crypto_aead_clear_flags(struct crypto_aead *tfm, u32 flags) { crypto_tfm_clear_flags(crypto_aead_tfm(tfm), flags); }

Contributors

PersonTokensPropCommitsCommitProp
Herbert Xu25100.00%1100.00%
Total25100.00%1100.00%

/** * crypto_aead_setkey() - set key for cipher * @tfm: cipher handle * @key: buffer holding the key * @keylen: length of the key in bytes * * The caller provided key is set for the AEAD referenced by the cipher * handle. * * Note, the key length determines the cipher type. Many block ciphers implement * different cipher modes depending on the key size, such as AES-128 vs AES-192 * vs. AES-256. When providing a 16 byte key for an AES cipher handle, AES-128 * is performed. * * Return: 0 if the setting of the key was successful; < 0 if an error occurred */ int crypto_aead_setkey(struct crypto_aead *tfm, const u8 *key, unsigned int keylen); /** * crypto_aead_setauthsize() - set authentication data size * @tfm: cipher handle * @authsize: size of the authentication data / tag in bytes * * Set the authentication data size / tag size. AEAD requires an authentication * tag (or MAC) in addition to the associated data. * * Return: 0 if the setting of the key was successful; < 0 if an error occurred */ int crypto_aead_setauthsize(struct crypto_aead *tfm, unsigned int authsize);
static inline struct crypto_aead *crypto_aead_reqtfm(struct aead_request *req) { return __crypto_aead_cast(req->base.tfm); }

Contributors

PersonTokensPropCommitsCommitProp
Herbert Xu24100.00%1100.00%
Total24100.00%1100.00%

/** * crypto_aead_encrypt() - encrypt plaintext * @req: reference to the aead_request handle that holds all information * needed to perform the cipher operation * * Encrypt plaintext data using the aead_request handle. That data structure * and how it is filled with data is discussed with the aead_request_* * functions. * * IMPORTANT NOTE The encryption operation creates the authentication data / * tag. That data is concatenated with the created ciphertext. * The ciphertext memory size is therefore the given number of * block cipher blocks + the size defined by the * crypto_aead_setauthsize invocation. The caller must ensure * that sufficient memory is available for the ciphertext and * the authentication tag. * * Return: 0 if the cipher operation was successful; < 0 if an error occurred */
static inline int crypto_aead_encrypt(struct aead_request *req) { return crypto_aead_alg(crypto_aead_reqtfm(req))->encrypt(req); }

Contributors

PersonTokensPropCommitsCommitProp
Herbert Xu26100.00%2100.00%
Total26100.00%2100.00%

/** * crypto_aead_decrypt() - decrypt ciphertext * @req: reference to the ablkcipher_request handle that holds all information * needed to perform the cipher operation * * Decrypt ciphertext data using the aead_request handle. That data structure * and how it is filled with data is discussed with the aead_request_* * functions. * * IMPORTANT NOTE The caller must concatenate the ciphertext followed by the * authentication data / tag. That authentication data / tag * must have the size defined by the crypto_aead_setauthsize * invocation. * * * Return: 0 if the cipher operation was successful; -EBADMSG: The AEAD * cipher operation performs the authentication of the data during the * decryption operation. Therefore, the function returns this error if * the authentication of the ciphertext was unsuccessful (i.e. the * integrity of the ciphertext or the associated data was violated); * < 0 if an error occurred. */
static inline int crypto_aead_decrypt(struct aead_request *req) { struct crypto_aead *aead = crypto_aead_reqtfm(req); if (req->cryptlen < crypto_aead_authsize(aead)) return -EINVAL; return crypto_aead_alg(aead)->decrypt(req); }

Contributors

PersonTokensPropCommitsCommitProp
Herbert Xu48100.00%3100.00%
Total48100.00%3100.00%

/** * DOC: Asynchronous AEAD Request Handle * * The aead_request data structure contains all pointers to data required for * the AEAD cipher operation. This includes the cipher handle (which can be * used by multiple aead_request instances), pointer to plaintext and * ciphertext, asynchronous callback function, etc. It acts as a handle to the * aead_request_* API calls in a similar way as AEAD handle to the * crypto_aead_* API calls. */ /** * crypto_aead_reqsize() - obtain size of the request data structure * @tfm: cipher handle * * Return: number of bytes */
static inline unsigned int crypto_aead_reqsize(struct crypto_aead *tfm) { return tfm->reqsize; }

Contributors

PersonTokensPropCommitsCommitProp
Herbert Xu18100.00%2100.00%
Total18100.00%2100.00%

/** * aead_request_set_tfm() - update cipher handle reference in request * @req: request handle to be modified * @tfm: cipher handle that shall be added to the request handle * * Allow the caller to replace the existing aead handle in the request * data structure with a different one. */
static inline void aead_request_set_tfm(struct aead_request *req, struct crypto_aead *tfm) { req->base.tfm = crypto_aead_tfm(tfm); }

Contributors

PersonTokensPropCommitsCommitProp
Herbert Xu28100.00%1100.00%
Total28100.00%1100.00%

/** * aead_request_alloc() - allocate request data structure * @tfm: cipher handle to be registered with the request * @gfp: memory allocation flag that is handed to kmalloc by the API call. * * Allocate the request data structure that must be used with the AEAD * encrypt and decrypt API calls. During the allocation, the provided aead * handle is registered in the request data structure. * * Return: allocated request handle in case of success, or NULL if out of memory */
static inline struct aead_request *aead_request_alloc(struct crypto_aead *tfm, gfp_t gfp) { struct aead_request *req; req = kmalloc(sizeof(*req) + crypto_aead_reqsize(tfm), gfp); if (likely(req)) aead_request_set_tfm(req, tfm); return req; }

Contributors

PersonTokensPropCommitsCommitProp
Herbert Xu57100.00%2100.00%
Total57100.00%2100.00%

/** * aead_request_free() - zeroize and free request data structure * @req: request data structure cipher handle to be freed */
static inline void aead_request_free(struct aead_request *req) { kzfree(req); }

Contributors

PersonTokensPropCommitsCommitProp
Herbert Xu17100.00%1100.00%
Total17100.00%1100.00%

/** * aead_request_set_callback() - set asynchronous callback function * @req: request handle * @flags: specify zero or an ORing of the flags * CRYPTO_TFM_REQ_MAY_BACKLOG the request queue may back log and * increase the wait queue beyond the initial maximum size; * CRYPTO_TFM_REQ_MAY_SLEEP the request processing may sleep * @compl: callback function pointer to be registered with the request handle * @data: The data pointer refers to memory that is not used by the kernel * crypto API, but provided to the callback function for it to use. Here, * the caller can provide a reference to memory the callback function can * operate on. As the callback function is invoked asynchronously to the * related functionality, it may need to access data structures of the * related functionality which can be referenced using this pointer. The * callback function can access the memory via the "data" field in the * crypto_async_request data structure provided to the callback function. * * Setting the callback function that is triggered once the cipher operation * completes * * The callback function is registered with the aead_request handle and * must comply with the following template:: * * void callback_function(struct crypto_async_request *req, int error) */
static inline void aead_request_set_callback(struct aead_request *req, u32 flags, crypto_completion_t compl, void *data) { req->base.complete = compl; req->base.data = data; req->base.flags = flags; }

Contributors

PersonTokensPropCommitsCommitProp
Herbert Xu46100.00%1100.00%
Total46100.00%1100.00%

/** * aead_request_set_crypt - set data buffers * @req: request handle * @src: source scatter / gather list * @dst: destination scatter / gather list * @cryptlen: number of bytes to process from @src * @iv: IV for the cipher operation which must comply with the IV size defined * by crypto_aead_ivsize() * * Setting the source data and destination data scatter / gather lists which * hold the associated data concatenated with the plaintext or ciphertext. See * below for the authentication tag. * * For encryption, the source is treated as the plaintext and the * destination is the ciphertext. For a decryption operation, the use is * reversed - the source is the ciphertext and the destination is the plaintext. * * The memory structure for cipher operation has the following structure: * * - AEAD encryption input: assoc data || plaintext * - AEAD encryption output: assoc data || cipherntext || auth tag * - AEAD decryption input: assoc data || ciphertext || auth tag * - AEAD decryption output: assoc data || plaintext * * Albeit the kernel requires the presence of the AAD buffer, however, * the kernel does not fill the AAD buffer in the output case. If the * caller wants to have that data buffer filled, the caller must either * use an in-place cipher operation (i.e. same memory location for * input/output memory location). */
static inline void aead_request_set_crypt(struct aead_request *req, struct scatterlist *src, struct scatterlist *dst, unsigned int cryptlen, u8 *iv) { req->src = src; req->dst = dst; req->cryptlen = cryptlen; req->iv = iv; }

Contributors

PersonTokensPropCommitsCommitProp
Herbert Xu54100.00%2100.00%
Total54100.00%2100.00%

/** * aead_request_set_ad - set associated data information * @req: request handle * @assoclen: number of bytes in associated data * * Setting the AD information. This function sets the length of * the associated data. */
static inline void aead_request_set_ad(struct aead_request *req, unsigned int assoclen) { req->assoclen = assoclen; }

Contributors

PersonTokensPropCommitsCommitProp
Herbert Xu22100.00%2100.00%
Total22100.00%2100.00%

#endif /* _CRYPTO_AEAD_H */

Overall Contributors

PersonTokensPropCommitsCommitProp
Herbert Xu86199.54%1076.92%
Stephan Mueller30.35%215.38%
Eric Biggers10.12%17.69%
Total865100.00%13100.00%
Directory: include/crypto
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with cregit.