cregit-Linux how code gets into the kernel

Release 4.12 include/drm/drm_panel.h

Directory: include/drm
/*
 * Copyright (C) 2013, NVIDIA Corporation.  All rights reserved.
 *
 * Permission is hereby granted, free of charge, to any person obtaining a
 * copy of this software and associated documentation files (the "Software"),
 * to deal in the Software without restriction, including without limitation
 * the rights to use, copy, modify, merge, publish, distribute, sub license,
 * and/or sell copies of the Software, and to permit persons to whom the
 * Software is furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice (including the
 * next paragraph) shall be included in all copies or substantial portions
 * of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
 * DEALINGS IN THE SOFTWARE.
 */

#ifndef __DRM_PANEL_H__

#define __DRM_PANEL_H__

#include <linux/list.h>

struct drm_connector;
struct drm_device;
struct drm_panel;
struct display_timing;

/**
 * struct drm_panel_funcs - perform operations on a given panel
 * @disable: disable panel (turn off back light, etc.)
 * @unprepare: turn off panel
 * @prepare: turn on panel and perform set up
 * @enable: enable panel (turn on back light, etc.)
 * @get_modes: add modes to the connector that the panel is attached to and
 * return the number of modes added
 * @get_timings: copy display timings into the provided array and return
 * the number of display timings available
 *
 * The .prepare() function is typically called before the display controller
 * starts to transmit video data. Panel drivers can use this to turn the panel
 * on and wait for it to become ready. If additional configuration is required
 * (via a control bus such as I2C, SPI or DSI for example) this is a good time
 * to do that.
 *
 * After the display controller has started transmitting video data, it's safe
 * to call the .enable() function. This will typically enable the backlight to
 * make the image on screen visible. Some panels require a certain amount of
 * time or frames before the image is displayed. This function is responsible
 * for taking this into account before enabling the backlight to avoid visual
 * glitches.
 *
 * Before stopping video transmission from the display controller it can be
 * necessary to turn off the panel to avoid visual glitches. This is done in
 * the .disable() function. Analogously to .enable() this typically involves
 * turning off the backlight and waiting for some time to make sure no image
 * is visible on the panel. It is then safe for the display controller to
 * cease transmission of video data.
 *
 * To save power when no video data is transmitted, a driver can power down
 * the panel. This is the job of the .unprepare() function.
 */

struct drm_panel_funcs {
	
int (*disable)(struct drm_panel *panel);
	
int (*unprepare)(struct drm_panel *panel);
	
int (*prepare)(struct drm_panel *panel);
	
int (*enable)(struct drm_panel *panel);
	
int (*get_modes)(struct drm_panel *panel);
	
int (*get_timings)(struct drm_panel *panel, unsigned int num_timings,
			   struct display_timing *timings);
};

/**
 * struct drm_panel - DRM panel object
 * @drm: DRM device owning the panel
 * @connector: DRM connector that the panel is attached to
 * @dev: parent device of the panel
 * @funcs: operations that can be performed on the panel
 * @list: panel entry in registry
 */

struct drm_panel {
	
struct drm_device *drm;
	
struct drm_connector *connector;
	
struct device *dev;

	
const struct drm_panel_funcs *funcs;

	
struct list_head list;
};

/**
 * drm_disable_unprepare - power off a panel
 * @panel: DRM panel
 *
 * Calling this function will completely power off a panel (assert the panel's
 * reset, turn off power supplies, ...). After this function has completed, it
 * is usually no longer possible to communicate with the panel until another
 * call to drm_panel_prepare().
 *
 * Return: 0 on success or a negative error code on failure.
 */

static inline int drm_panel_unprepare(struct drm_panel *panel) { if (panel && panel->funcs && panel->funcs->unprepare) return panel->funcs->unprepare(panel); return panel ? -ENOSYS : -EINVAL; }

Contributors

PersonTokensPropCommitsCommitProp
Ajay Kumar45100.00%1100.00%
Total45100.00%1100.00%

/** * drm_panel_disable - disable a panel * @panel: DRM panel * * This will typically turn off the panel's backlight or disable the display * drivers. For smart panels it should still be possible to communicate with * the integrated circuitry via any command bus after this call. * * Return: 0 on success or a negative error code on failure. */
static inline int drm_panel_disable(struct drm_panel *panel) { if (panel && panel->funcs && panel->funcs->disable) return panel->funcs->disable(panel); return panel ? -ENOSYS : -EINVAL; }

Contributors

PersonTokensPropCommitsCommitProp
Thierry Reding45100.00%1100.00%
Total45100.00%1100.00%

/** * drm_panel_prepare - power on a panel * @panel: DRM panel * * Calling this function will enable power and deassert any reset signals to * the panel. After this has completed it is possible to communicate with any * integrated circuitry via a command bus. * * Return: 0 on success or a negative error code on failure. */
static inline int drm_panel_prepare(struct drm_panel *panel) { if (panel && panel->funcs && panel->funcs->prepare) return panel->funcs->prepare(panel); return panel ? -ENOSYS : -EINVAL; }

Contributors

PersonTokensPropCommitsCommitProp
Ajay Kumar45100.00%1100.00%
Total45100.00%1100.00%

/** * drm_panel_enable - enable a panel * @panel: DRM panel * * Calling this function will cause the panel display drivers to be turned on * and the backlight to be enabled. Content will be visible on screen after * this call completes. * * Return: 0 on success or a negative error code on failure. */
static inline int drm_panel_enable(struct drm_panel *panel) { if (panel && panel->funcs && panel->funcs->enable) return panel->funcs->enable(panel); return panel ? -ENOSYS : -EINVAL; }

Contributors

PersonTokensPropCommitsCommitProp
Thierry Reding45100.00%1100.00%
Total45100.00%1100.00%

/** * drm_panel_get_modes - probe the available display modes of a panel * @panel: DRM panel * * The modes probed from the panel are automatically added to the connector * that the panel is attached to. * * Return: The number of modes available from the panel on success or a * negative error code on failure. */
static inline int drm_panel_get_modes(struct drm_panel *panel) { if (panel && panel->funcs && panel->funcs->get_modes) return panel->funcs->get_modes(panel); return panel ? -ENOSYS : -EINVAL; }

Contributors

PersonTokensPropCommitsCommitProp
Ajay Kumar45100.00%1100.00%
Total45100.00%1100.00%

void drm_panel_init(struct drm_panel *panel); int drm_panel_add(struct drm_panel *panel); void drm_panel_remove(struct drm_panel *panel); int drm_panel_attach(struct drm_panel *panel, struct drm_connector *connector); int drm_panel_detach(struct drm_panel *panel); #if defined(CONFIG_OF) && defined(CONFIG_DRM_PANEL) struct drm_panel *of_drm_find_panel(const struct device_node *np); #else
static inline struct drm_panel *of_drm_find_panel(const struct device_node *np) { return NULL; }

Contributors

PersonTokensPropCommitsCommitProp
Thierry Reding1794.44%150.00%
Laurent Pinchart15.56%150.00%
Total18100.00%2100.00%

#endif #endif

Overall Contributors

PersonTokensPropCommitsCommitProp
Thierry Reding27158.03%228.57%
Ajay Kumar15934.05%228.57%
Philipp Zabel255.35%114.29%
Rob Herring102.14%114.29%
Laurent Pinchart20.43%114.29%
Total467100.00%7100.00%
Directory: include/drm
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with cregit.