cregit-Linux how code gets into the kernel

Release 4.12 include/linux/devfreq_cooling.h

Directory: include/linux
/*
 * devfreq_cooling: Thermal cooling device implementation for devices using
 *                  devfreq
 *
 * Copyright (C) 2014-2015 ARM Limited
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 *
 * This program is distributed "as is" WITHOUT ANY WARRANTY of any
 * kind, whether express or implied; without even the implied warranty
 * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

#ifndef __DEVFREQ_COOLING_H__

#define __DEVFREQ_COOLING_H__

#include <linux/devfreq.h>
#include <linux/thermal.h>


/**
 * struct devfreq_cooling_power - Devfreq cooling power ops
 * @get_static_power:   Take voltage, in mV, and return the static power
 *                      in mW.  If NULL, the static power is assumed
 *                      to be 0.
 * @get_dynamic_power:  Take voltage, in mV, and frequency, in HZ, and
 *                      return the dynamic power draw in mW.  If NULL,
 *                      a simple power model is used.
 * @dyn_power_coeff:    Coefficient for the simple dynamic power model in
 *                      mW/(MHz mV mV).
 *                      If get_dynamic_power() is NULL, then the
 *                      dynamic power is calculated as
 *                      @dyn_power_coeff * frequency * voltage^2
 * @get_real_power:     When this is set, the framework uses it to ask the
 *                      device driver for the actual power.
 *                      Some devices have more sophisticated methods
 *                      (like power counters) to approximate the actual power
 *                      that they use.
 *                      This function provides more accurate data to the
 *                      thermal governor. When the driver does not provide
 *                      such function, framework just uses pre-calculated
 *                      table and scale the power by 'utilization'
 *                      (based on 'busy_time' and 'total_time' taken from
 *                      devfreq 'last_status').
 *                      The value returned by this function must be lower
 *                      or equal than the maximum power value
 *                      for the current state
 *                      (which can be found in power_table[state]).
 *                      When this interface is used, the power_table holds
 *                      max total (static + dynamic) power value for each OPP.
 */

struct devfreq_cooling_power {
	
unsigned long (*get_static_power)(struct devfreq *devfreq,
					  unsigned long voltage);
	
unsigned long (*get_dynamic_power)(struct devfreq *devfreq,
					   unsigned long freq,
					   unsigned long voltage);
	
int (*get_real_power)(struct devfreq *df, u32 *power,
			      unsigned long freq, unsigned long voltage);
	
unsigned long dyn_power_coeff;
};

#ifdef CONFIG_DEVFREQ_THERMAL

struct thermal_cooling_device *
of_devfreq_cooling_register_power(struct device_node *np, struct devfreq *df,
				  struct devfreq_cooling_power *dfc_power);
struct thermal_cooling_device *
of_devfreq_cooling_register(struct device_node *np, struct devfreq *df);
struct thermal_cooling_device *devfreq_cooling_register(struct devfreq *df);
void devfreq_cooling_unregister(struct thermal_cooling_device *dfc);

#else /* !CONFIG_DEVFREQ_THERMAL */


struct thermal_cooling_device * of_devfreq_cooling_register_power(struct device_node *np, struct devfreq *df, struct devfreq_cooling_power *dfc_power) { return ERR_PTR(-EINVAL); }

Contributors

PersonTokensPropCommitsCommitProp
Ørjan Eide2896.55%150.00%
Javi Merino13.45%150.00%
Total29100.00%2100.00%


static inline struct thermal_cooling_device * of_devfreq_cooling_register(struct device_node *np, struct devfreq *df) { return ERR_PTR(-EINVAL); }

Contributors

PersonTokensPropCommitsCommitProp
Ørjan Eide2596.15%150.00%
Javi Merino13.85%150.00%
Total26100.00%2100.00%


static inline struct thermal_cooling_device * devfreq_cooling_register(struct devfreq *df) { return ERR_PTR(-EINVAL); }

Contributors

PersonTokensPropCommitsCommitProp
Ørjan Eide2095.24%150.00%
Javi Merino14.76%150.00%
Total21100.00%2100.00%


static inline void devfreq_cooling_unregister(struct thermal_cooling_device *dfc) { }

Contributors

PersonTokensPropCommitsCommitProp
Ørjan Eide1090.91%150.00%
Javi Merino19.09%150.00%
Total11100.00%2100.00%

#endif /* CONFIG_DEVFREQ_THERMAL */ #endif /* __DEVFREQ_COOLING_H__ */

Overall Contributors

PersonTokensPropCommitsCommitProp
Ørjan Eide19580.91%120.00%
Lukasz Luba2811.62%240.00%
Javi Merino187.47%240.00%
Total241100.00%5100.00%
Directory: include/linux
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with cregit.