cregit-Linux how code gets into the kernel

Release 4.12 include/linux/kgdb.h

Directory: include/linux
/*
 * This provides the callbacks and functions that KGDB needs to share between
 * the core, I/O and arch-specific portions.
 *
 * Author: Amit Kale <amitkale@linsyssoft.com> and
 *         Tom Rini <trini@kernel.crashing.org>
 *
 * 2001-2004 (c) Amit S. Kale and 2003-2005 (c) MontaVista Software, Inc.
 * This file is licensed under the terms of the GNU General Public License
 * version 2. This program is licensed "as is" without any warranty of any
 * kind, whether express or implied.
 */
#ifndef _KGDB_H_

#define _KGDB_H_

#include <linux/linkage.h>
#include <linux/init.h>
#include <linux/atomic.h>
#ifdef CONFIG_HAVE_ARCH_KGDB
#include <asm/kgdb.h>
#endif

#ifdef CONFIG_KGDB
struct pt_regs;

/**
 *      kgdb_skipexception - (optional) exit kgdb_handle_exception early
 *      @exception: Exception vector number
 *      @regs: Current &struct pt_regs.
 *
 *      On some architectures it is required to skip a breakpoint
 *      exception when it occurs after a breakpoint has been removed.
 *      This can be implemented in the architecture specific portion of kgdb.
 */
extern int kgdb_skipexception(int exception, struct pt_regs *regs);

struct tasklet_struct;
struct task_struct;
struct uart_port;

/**
 *      kgdb_breakpoint - compiled in breakpoint
 *
 *      This will be implemented as a static inline per architecture.  This
 *      function is called by the kgdb core to execute an architecture
 *      specific trap to cause kgdb to enter the exception processing.
 *
 */
void kgdb_breakpoint(void);

extern int kgdb_connected;
extern int kgdb_io_module_registered;

extern atomic_t			kgdb_setting_breakpoint;
extern atomic_t			kgdb_cpu_doing_single_step;

extern struct task_struct	*kgdb_usethread;
extern struct task_struct	*kgdb_contthread;


enum kgdb_bptype {
	
BP_BREAKPOINT = 0,
	
BP_HARDWARE_BREAKPOINT,
	
BP_WRITE_WATCHPOINT,
	
BP_READ_WATCHPOINT,
	
BP_ACCESS_WATCHPOINT,
	
BP_POKE_BREAKPOINT,
};


enum kgdb_bpstate {
	
BP_UNDEFINED = 0,
	
BP_REMOVED,
	
BP_SET,
	
BP_ACTIVE
};


struct kgdb_bkpt {
	
unsigned long		bpt_addr;
	
unsigned char		saved_instr[BREAK_INSTR_SIZE];
	
enum kgdb_bptype	type;
	
enum kgdb_bpstate	state;
};


struct dbg_reg_def_t {
	
char *name;
	
int size;
	
int offset;
};

#ifndef DBG_MAX_REG_NUM

#define DBG_MAX_REG_NUM 0
#else
extern struct dbg_reg_def_t dbg_reg_def[];
extern char *dbg_get_reg(int regno, void *mem, struct pt_regs *regs);
extern int dbg_set_reg(int regno, void *mem, struct pt_regs *regs);
#endif
#ifndef KGDB_MAX_BREAKPOINTS

# define KGDB_MAX_BREAKPOINTS	1000
#endif


#define KGDB_HW_BREAKPOINT	1

/*
 * Functions each KGDB-supporting architecture must provide:
 */

/**
 *      kgdb_arch_init - Perform any architecture specific initalization.
 *
 *      This function will handle the initalization of any architecture
 *      specific callbacks.
 */
extern int kgdb_arch_init(void);

/**
 *      kgdb_arch_exit - Perform any architecture specific uninitalization.
 *
 *      This function will handle the uninitalization of any architecture
 *      specific callbacks, for dynamic registration and unregistration.
 */
extern void kgdb_arch_exit(void);

/**
 *      pt_regs_to_gdb_regs - Convert ptrace regs to GDB regs
 *      @gdb_regs: A pointer to hold the registers in the order GDB wants.
 *      @regs: The &struct pt_regs of the current process.
 *
 *      Convert the pt_regs in @regs into the format for registers that
 *      GDB expects, stored in @gdb_regs.
 */
extern void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs);

/**
 *      sleeping_thread_to_gdb_regs - Convert ptrace regs to GDB regs
 *      @gdb_regs: A pointer to hold the registers in the order GDB wants.
 *      @p: The &struct task_struct of the desired process.
 *
 *      Convert the register values of the sleeping process in @p to
 *      the format that GDB expects.
 *      This function is called when kgdb does not have access to the
 *      &struct pt_regs and therefore it should fill the gdb registers
 *      @gdb_regs with what has been saved in &struct thread_struct
 *      thread field during switch_to.
 */
extern void
sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *p);

/**
 *      gdb_regs_to_pt_regs - Convert GDB regs to ptrace regs.
 *      @gdb_regs: A pointer to hold the registers we've received from GDB.
 *      @regs: A pointer to a &struct pt_regs to hold these values in.
 *
 *      Convert the GDB regs in @gdb_regs into the pt_regs, and store them
 *      in @regs.
 */
extern void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *regs);

/**
 *      kgdb_arch_handle_exception - Handle architecture specific GDB packets.
 *      @vector: The error vector of the exception that happened.
 *      @signo: The signal number of the exception that happened.
 *      @err_code: The error code of the exception that happened.
 *      @remcom_in_buffer: The buffer of the packet we have read.
 *      @remcom_out_buffer: The buffer of %BUFMAX bytes to write a packet into.
 *      @regs: The &struct pt_regs of the current process.
 *
 *      This function MUST handle the 'c' and 's' command packets,
 *      as well packets to set / remove a hardware breakpoint, if used.
 *      If there are additional packets which the hardware needs to handle,
 *      they are handled here.  The code should return -1 if it wants to
 *      process more packets, and a %0 or %1 if it wants to exit from the
 *      kgdb callback.
 */
extern int
kgdb_arch_handle_exception(int vector, int signo, int err_code,
			   char *remcom_in_buffer,
			   char *remcom_out_buffer,
			   struct pt_regs *regs);

/**
 *      kgdb_roundup_cpus - Get other CPUs into a holding pattern
 *      @flags: Current IRQ state
 *
 *      On SMP systems, we need to get the attention of the other CPUs
 *      and get them into a known state.  This should do what is needed
 *      to get the other CPUs to call kgdb_wait(). Note that on some arches,
 *      the NMI approach is not used for rounding up all the CPUs. For example,
 *      in case of MIPS, smp_call_function() is used to roundup CPUs. In
 *      this case, we have to make sure that interrupts are enabled before
 *      calling smp_call_function(). The argument to this function is
 *      the flags that will be used when restoring the interrupts. There is
 *      local_irq_save() call before kgdb_roundup_cpus().
 *
 *      On non-SMP systems, this is not called.
 */
extern void kgdb_roundup_cpus(unsigned long flags);

/**
 *      kgdb_arch_set_pc - Generic call back to the program counter
 *      @regs: Current &struct pt_regs.
 *  @pc: The new value for the program counter
 *
 *      This function handles updating the program counter and requires an
 *      architecture specific implementation.
 */
extern void kgdb_arch_set_pc(struct pt_regs *regs, unsigned long pc);


/* Optional functions. */
extern int kgdb_validate_break_address(unsigned long addr);
extern int kgdb_arch_set_breakpoint(struct kgdb_bkpt *bpt);
extern int kgdb_arch_remove_breakpoint(struct kgdb_bkpt *bpt);

/**
 *      kgdb_arch_late - Perform any architecture specific initalization.
 *
 *      This function will handle the late initalization of any
 *      architecture specific callbacks.  This is an optional function for
 *      handling things like late initialization of hw breakpoints.  The
 *      default implementation does nothing.
 */
extern void kgdb_arch_late(void);


/**
 * struct kgdb_arch - Describe architecture specific values.
 * @gdb_bpt_instr: The instruction to trigger a breakpoint.
 * @flags: Flags for the breakpoint, currently just %KGDB_HW_BREAKPOINT.
 * @set_breakpoint: Allow an architecture to specify how to set a software
 * breakpoint.
 * @remove_breakpoint: Allow an architecture to specify how to remove a
 * software breakpoint.
 * @set_hw_breakpoint: Allow an architecture to specify how to set a hardware
 * breakpoint.
 * @remove_hw_breakpoint: Allow an architecture to specify how to remove a
 * hardware breakpoint.
 * @disable_hw_break: Allow an architecture to specify how to disable
 * hardware breakpoints for a single cpu.
 * @remove_all_hw_break: Allow an architecture to specify how to remove all
 * hardware breakpoints.
 * @correct_hw_break: Allow an architecture to specify how to correct the
 * hardware debug registers.
 * @enable_nmi: Manage NMI-triggered entry to KGDB
 */

struct kgdb_arch {
	
unsigned char		gdb_bpt_instr[BREAK_INSTR_SIZE];
	
unsigned long		flags;

	
int	(*set_breakpoint)(unsigned long, char *);
	
int	(*remove_breakpoint)(unsigned long, char *);
	
int	(*set_hw_breakpoint)(unsigned long, int, enum kgdb_bptype);
	
int	(*remove_hw_breakpoint)(unsigned long, int, enum kgdb_bptype);
	
void	(*disable_hw_break)(struct pt_regs *regs);
	
void	(*remove_all_hw_break)(void);
	
void	(*correct_hw_break)(void);

	
void	(*enable_nmi)(bool on);
};

/**
 * struct kgdb_io - Describe the interface for an I/O driver to talk with KGDB.
 * @name: Name of the I/O driver.
 * @read_char: Pointer to a function that will return one char.
 * @write_char: Pointer to a function that will write one char.
 * @flush: Pointer to a function that will flush any pending writes.
 * @init: Pointer to a function that will initialize the device.
 * @pre_exception: Pointer to a function that will do any prep work for
 * the I/O driver.
 * @post_exception: Pointer to a function that will do any cleanup work
 * for the I/O driver.
 * @is_console: 1 if the end device is a console 0 if the I/O device is
 * not a console
 */

struct kgdb_io {
	
const char		*name;
	
int			(*read_char) (void);
	
void			(*write_char) (u8);
	
void			(*flush) (void);
	
int			(*init) (void);
	
void			(*pre_exception) (void);
	
void			(*post_exception) (void);
	
int			is_console;
};

extern struct kgdb_arch		arch_kgdb_ops;

extern unsigned long kgdb_arch_pc(int exception, struct pt_regs *regs);

#ifdef CONFIG_SERIAL_KGDB_NMI
extern int kgdb_register_nmi_console(void);
extern int kgdb_unregister_nmi_console(void);
extern bool kgdb_nmi_poll_knock(void);
#else

static inline int kgdb_register_nmi_console(void) { return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Anton Vorontsov12100.00%1100.00%
Total12100.00%1100.00%


static inline int kgdb_unregister_nmi_console(void) { return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Anton Vorontsov12100.00%1100.00%
Total12100.00%1100.00%


static inline bool kgdb_nmi_poll_knock(void) { return 1; }

Contributors

PersonTokensPropCommitsCommitProp
Anton Vorontsov12100.00%1100.00%
Total12100.00%1100.00%

#endif extern int kgdb_register_io_module(struct kgdb_io *local_kgdb_io_ops); extern void kgdb_unregister_io_module(struct kgdb_io *local_kgdb_io_ops); extern struct kgdb_io *dbg_io_ops; extern int kgdb_hex2long(char **ptr, unsigned long *long_val); extern char *kgdb_mem2hex(char *mem, char *buf, int count); extern int kgdb_hex2mem(char *buf, char *mem, int count); extern int kgdb_isremovedbreak(unsigned long addr); extern void kgdb_schedule_breakpoint(void); extern int kgdb_handle_exception(int ex_vector, int signo, int err_code, struct pt_regs *regs); extern int kgdb_nmicallback(int cpu, void *regs); extern int kgdb_nmicallin(int cpu, int trapnr, void *regs, int err_code, atomic_t *snd_rdy); extern void gdbstub_exit(int status); extern int kgdb_single_step; extern atomic_t kgdb_active; #define in_dbg_master() \ (raw_smp_processor_id() == atomic_read(&kgdb_active)) extern bool dbg_is_early; extern void __init dbg_late_init(void); #else /* ! CONFIG_KGDB */ #define in_dbg_master() (0) #define dbg_late_init() #endif /* ! CONFIG_KGDB */ #endif /* _KGDB_H_ */

Overall Contributors

PersonTokensPropCommitsCommitProp
Jason Wessel70383.79%1359.09%
Anton Vorontsov758.94%29.09%
Mike Travis222.62%29.09%
Harvey Harrison151.79%14.55%
Dongdong Deng121.43%14.55%
David Howells80.95%14.55%
Randy Dunlap30.36%14.55%
Arun Sharma10.12%14.55%
Total839100.00%22100.00%
Directory: include/linux
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with cregit.