cregit-Linux how code gets into the kernel

Release 4.12 include/linux/platform_data/gpio-omap.h

/*
 * OMAP GPIO handling defines and functions
 *
 * Copyright (C) 2003-2005 Nokia Corporation
 *
 * Written by Juha Yrjölä <juha.yrjola@nokia.com>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
 *
 */

#ifndef __ASM_ARCH_OMAP_GPIO_H

#define __ASM_ARCH_OMAP_GPIO_H

#include <linux/io.h>
#include <linux/platform_device.h>


#define OMAP1_MPUIO_BASE			0xfffb5000

/*
 * These are the omap15xx/16xx offsets. The omap7xx offset are
 * OMAP_MPUIO_ / 2 offsets below.
 */

#define OMAP_MPUIO_INPUT_LATCH		0x00

#define OMAP_MPUIO_OUTPUT		0x04

#define OMAP_MPUIO_IO_CNTL		0x08

#define OMAP_MPUIO_KBR_LATCH		0x10

#define OMAP_MPUIO_KBC			0x14

#define OMAP_MPUIO_GPIO_EVENT_MODE	0x18

#define OMAP_MPUIO_GPIO_INT_EDGE	0x1c

#define OMAP_MPUIO_KBD_INT		0x20

#define OMAP_MPUIO_GPIO_INT		0x24

#define OMAP_MPUIO_KBD_MASKIT		0x28

#define OMAP_MPUIO_GPIO_MASKIT		0x2c

#define OMAP_MPUIO_GPIO_DEBOUNCING	0x30

#define OMAP_MPUIO_LATCH		0x34


#define OMAP34XX_NR_GPIOS		6

/*
 * OMAP1510 GPIO registers
 */

#define OMAP1510_GPIO_DATA_INPUT	0x00

#define OMAP1510_GPIO_DATA_OUTPUT	0x04

#define OMAP1510_GPIO_DIR_CONTROL	0x08

#define OMAP1510_GPIO_INT_CONTROL	0x0c

#define OMAP1510_GPIO_INT_MASK		0x10

#define OMAP1510_GPIO_INT_STATUS	0x14

#define OMAP1510_GPIO_PIN_CONTROL	0x18


#define OMAP1510_IH_GPIO_BASE		64

/*
 * OMAP1610 specific GPIO registers
 */

#define OMAP1610_GPIO_REVISION		0x0000

#define OMAP1610_GPIO_SYSCONFIG		0x0010

#define OMAP1610_GPIO_SYSSTATUS		0x0014

#define OMAP1610_GPIO_IRQSTATUS1	0x0018

#define OMAP1610_GPIO_IRQENABLE1	0x001c

#define OMAP1610_GPIO_WAKEUPENABLE	0x0028

#define OMAP1610_GPIO_DATAIN		0x002c

#define OMAP1610_GPIO_DATAOUT		0x0030

#define OMAP1610_GPIO_DIRECTION		0x0034

#define OMAP1610_GPIO_EDGE_CTRL1	0x0038

#define OMAP1610_GPIO_EDGE_CTRL2	0x003c

#define OMAP1610_GPIO_CLEAR_IRQENABLE1	0x009c

#define OMAP1610_GPIO_CLEAR_WAKEUPENA	0x00a8

#define OMAP1610_GPIO_CLEAR_DATAOUT	0x00b0

#define OMAP1610_GPIO_SET_IRQENABLE1	0x00dc

#define OMAP1610_GPIO_SET_WAKEUPENA	0x00e8

#define OMAP1610_GPIO_SET_DATAOUT	0x00f0

/*
 * OMAP7XX specific GPIO registers
 */

#define OMAP7XX_GPIO_DATA_INPUT		0x00

#define OMAP7XX_GPIO_DATA_OUTPUT	0x04

#define OMAP7XX_GPIO_DIR_CONTROL	0x08

#define OMAP7XX_GPIO_INT_CONTROL	0x0c

#define OMAP7XX_GPIO_INT_MASK		0x10

#define OMAP7XX_GPIO_INT_STATUS		0x14

/*
 * omap2+ specific GPIO registers
 */

#define OMAP24XX_GPIO_REVISION		0x0000

#define OMAP24XX_GPIO_IRQSTATUS1	0x0018

#define OMAP24XX_GPIO_IRQSTATUS2	0x0028

#define OMAP24XX_GPIO_IRQENABLE2	0x002c

#define OMAP24XX_GPIO_IRQENABLE1	0x001c

#define OMAP24XX_GPIO_WAKE_EN		0x0020

#define OMAP24XX_GPIO_CTRL		0x0030

#define OMAP24XX_GPIO_OE		0x0034

#define OMAP24XX_GPIO_DATAIN		0x0038

#define OMAP24XX_GPIO_DATAOUT		0x003c

#define OMAP24XX_GPIO_LEVELDETECT0	0x0040

#define OMAP24XX_GPIO_LEVELDETECT1	0x0044

#define OMAP24XX_GPIO_RISINGDETECT	0x0048

#define OMAP24XX_GPIO_FALLINGDETECT	0x004c

#define OMAP24XX_GPIO_DEBOUNCE_EN	0x0050

#define OMAP24XX_GPIO_DEBOUNCE_VAL	0x0054

#define OMAP24XX_GPIO_CLEARIRQENABLE1	0x0060

#define OMAP24XX_GPIO_SETIRQENABLE1	0x0064

#define OMAP24XX_GPIO_CLEARWKUENA	0x0080

#define OMAP24XX_GPIO_SETWKUENA		0x0084

#define OMAP24XX_GPIO_CLEARDATAOUT	0x0090

#define OMAP24XX_GPIO_SETDATAOUT	0x0094


#define OMAP4_GPIO_REVISION		0x0000

#define OMAP4_GPIO_EOI			0x0020

#define OMAP4_GPIO_IRQSTATUSRAW0	0x0024

#define OMAP4_GPIO_IRQSTATUSRAW1	0x0028

#define OMAP4_GPIO_IRQSTATUS0		0x002c

#define OMAP4_GPIO_IRQSTATUS1		0x0030

#define OMAP4_GPIO_IRQSTATUSSET0	0x0034

#define OMAP4_GPIO_IRQSTATUSSET1	0x0038

#define OMAP4_GPIO_IRQSTATUSCLR0	0x003c

#define OMAP4_GPIO_IRQSTATUSCLR1	0x0040

#define OMAP4_GPIO_IRQWAKEN0		0x0044

#define OMAP4_GPIO_IRQWAKEN1		0x0048

#define OMAP4_GPIO_IRQENABLE1		0x011c

#define OMAP4_GPIO_WAKE_EN		0x0120

#define OMAP4_GPIO_IRQSTATUS2		0x0128

#define OMAP4_GPIO_IRQENABLE2		0x012c

#define OMAP4_GPIO_CTRL			0x0130

#define OMAP4_GPIO_OE			0x0134

#define OMAP4_GPIO_DATAIN		0x0138

#define OMAP4_GPIO_DATAOUT		0x013c

#define OMAP4_GPIO_LEVELDETECT0		0x0140

#define OMAP4_GPIO_LEVELDETECT1		0x0144

#define OMAP4_GPIO_RISINGDETECT		0x0148

#define OMAP4_GPIO_FALLINGDETECT	0x014c

#define OMAP4_GPIO_DEBOUNCENABLE	0x0150

#define OMAP4_GPIO_DEBOUNCINGTIME	0x0154

#define OMAP4_GPIO_CLEARIRQENABLE1	0x0160

#define OMAP4_GPIO_SETIRQENABLE1	0x0164

#define OMAP4_GPIO_CLEARWKUENA		0x0180

#define OMAP4_GPIO_SETWKUENA		0x0184

#define OMAP4_GPIO_CLEARDATAOUT		0x0190

#define OMAP4_GPIO_SETDATAOUT		0x0194


#define OMAP_MAX_GPIO_LINES		192


#define OMAP_MPUIO(nr)		(OMAP_MAX_GPIO_LINES + (nr))

#define OMAP_GPIO_IS_MPUIO(nr)	((nr) >= OMAP_MAX_GPIO_LINES)


struct omap_gpio_dev_attr {
	
int bank_width;		/* GPIO bank width */
	
bool dbck_flag;		/* dbck required or not - True for OMAP3&4 */
};


struct omap_gpio_reg_offs {
	
u16 revision;
	
u16 direction;
	
u16 datain;
	
u16 dataout;
	
u16 set_dataout;
	
u16 clr_dataout;
	
u16 irqstatus;
	
u16 irqstatus2;
	
u16 irqstatus_raw0;
	
u16 irqstatus_raw1;
	
u16 irqenable;
	
u16 irqenable2;
	
u16 set_irqenable;
	
u16 clr_irqenable;
	
u16 debounce;
	
u16 debounce_en;
	
u16 ctrl;
	
u16 wkup_en;
	
u16 leveldetect0;
	
u16 leveldetect1;
	
u16 risingdetect;
	
u16 fallingdetect;
	
u16 irqctrl;
	
u16 edgectrl1;
	
u16 edgectrl2;
	
u16 pinctrl;

	
bool irqenable_inv;
};


struct omap_gpio_platform_data {
	
int bank_type;
	
int bank_width;		/* GPIO bank width */
	
int bank_stride;	/* Only needed for omap1 MPUIO */
	
bool dbck_flag;		/* dbck required or not - True for OMAP3&4 */
	
bool loses_context;	/* whether the bank would ever lose context */
	
bool is_mpuio;		/* whether the bank is of type MPUIO */
	
u32 non_wakeup_gpios;

	
struct omap_gpio_reg_offs *regs;

	/* Return context loss count due to PM states changing */
	
int (*get_context_loss_count)(struct device *dev);
};

#if IS_BUILTIN(CONFIG_GPIO_OMAP)
extern void omap2_gpio_prepare_for_idle(int off_mode);
extern void omap2_gpio_resume_after_idle(void);
#else

static inline void omap2_gpio_prepare_for_idle(int off_mode) { }

Contributors

PersonTokensPropCommitsCommitProp
Tony Lindgren666.67%266.67%
Kevin Hilman333.33%133.33%
Total9100.00%3100.00%


static inline void omap2_gpio_resume_after_idle(void) { }

Contributors

PersonTokensPropCommitsCommitProp
Tony Lindgren562.50%150.00%
Kevin Hilman337.50%150.00%
Total8100.00%2100.00%

#endif #endif

Overall Contributors

PersonTokensPropCommitsCommitProp
Kevin Hilman40564.49%825.00%
Tony Lindgren12319.59%721.88%
Varadarajan, Charulatha477.48%721.88%
Tarun Kanti DebBarma467.32%618.75%
Syed Mohammed Khasim40.64%13.12%
Russell King20.32%26.25%
Paul Walmsley10.16%13.12%
Total628100.00%32100.00%
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with cregit.