#ifndef __LINUX_SPI_EEPROM_H #define __LINUX_SPI_EEPROM_H #include <linux/memory.h> /* * Put one of these structures in platform_data for SPI EEPROMS handled * by the "at25" driver. On SPI, most EEPROMS understand the same core * command set. If you need to support EEPROMs that don't yet fit, add * flags to support those protocol options. These values all come from * the chip datasheets. */ struct spi_eeprom { u32 byte_len; char name[10]; u16 page_size; /* for writes */ u16 flags; #define EE_ADDR1 0x0001 /* 8 bit addrs */ #define EE_ADDR2 0x0002 /* 16 bit addrs */ #define EE_ADDR3 0x0004 /* 24 bit addrs */ #define EE_READONLY 0x0008 /* disallow writes */ /* * Certain EEPROMS have a size that is larger than the number of address * bytes would allow (e.g. like M95040 from ST that has 512 Byte size * but uses only one address byte (A0 to A7) for addressing.) For * the extra address bit (A8, A16 or A24) bit 3 of the instruction byte * is used. This instruction bit is normally defined as don't care for * other AT25 like chips. */ #define EE_INSTR_BIT3_IS_ADDR 0x0010 void *context; }; #endif /* __LINUX_SPI_EEPROM_H */Overall Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| David Brownell | 58 | 92.06% | 2 | 66.67% |
| Ivo Sieben | 5 | 7.94% | 1 | 33.33% |
| Total | 63 | 100.00% | 3 | 100.00% |