Release 4.12 include/scsi/scsi_transport_sas.h
#ifndef SCSI_TRANSPORT_SAS_H
#define SCSI_TRANSPORT_SAS_H
#include <linux/transport_class.h>
#include <linux/types.h>
#include <linux/mutex.h>
#include <scsi/sas.h>
struct scsi_transport_template;
struct sas_rphy;
struct request;
#if !IS_ENABLED(CONFIG_SCSI_SAS_ATTRS)
static inline int scsi_is_sas_rphy(const struct device *sdev)
{
return 0;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Johannes Thumshirn | 16 | 100.00% | 1 | 100.00% |
| Total | 16 | 100.00% | 1 | 100.00% |
#else
extern int scsi_is_sas_rphy(const struct device *);
#endif
static inline int sas_protocol_ata(enum sas_protocol proto)
{
return ((proto & SAS_PROTOCOL_SATA) ||
(proto & SAS_PROTOCOL_STP))? 1 : 0;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| James Bottomley | 30 | 100.00% | 1 | 100.00% |
| Total | 30 | 100.00% | 1 | 100.00% |
enum sas_linkrate {
/* These Values are defined in the SAS standard */
SAS_LINK_RATE_UNKNOWN = 0,
SAS_PHY_DISABLED = 1,
SAS_PHY_RESET_PROBLEM = 2,
SAS_SATA_SPINUP_HOLD = 3,
SAS_SATA_PORT_SELECTOR = 4,
SAS_PHY_RESET_IN_PROGRESS = 5,
SAS_LINK_RATE_1_5_GBPS = 8,
SAS_LINK_RATE_G1 = SAS_LINK_RATE_1_5_GBPS,
SAS_LINK_RATE_3_0_GBPS = 9,
SAS_LINK_RATE_G2 = SAS_LINK_RATE_3_0_GBPS,
SAS_LINK_RATE_6_0_GBPS = 10,
SAS_LINK_RATE_12_0_GBPS = 11,
/* These are virtual to the transport class and may never
* be signalled normally since the standard defined field
* is only 4 bits */
SAS_LINK_RATE_FAILED = 0x10,
SAS_PHY_VIRTUAL = 0x11,
};
struct sas_identify {
enum sas_device_type device_type;
enum sas_protocol initiator_port_protocols;
enum sas_protocol target_port_protocols;
u64 sas_address;
u8 phy_identifier;
};
struct sas_phy {
struct device dev;
int number;
int enabled;
/* phy identification */
struct sas_identify identify;
/* phy attributes */
enum sas_linkrate negotiated_linkrate;
enum sas_linkrate minimum_linkrate_hw;
enum sas_linkrate minimum_linkrate;
enum sas_linkrate maximum_linkrate_hw;
enum sas_linkrate maximum_linkrate;
/* link error statistics */
u32 invalid_dword_count;
u32 running_disparity_error_count;
u32 loss_of_dword_sync_count;
u32 phy_reset_problem_count;
/* for the list of phys belonging to a port */
struct list_head port_siblings;
/* available to the lldd */
void *hostdata;
};
#define dev_to_phy(d) \
container_of((d), struct sas_phy, dev)
#define transport_class_to_phy(dev) \
dev_to_phy((dev)->parent)
#define phy_to_shost(phy) \
dev_to_shost((phy)->dev.parent)
struct request_queue;
struct sas_rphy {
struct device dev;
struct sas_identify identify;
struct list_head list;
struct request_queue *q;
u32 scsi_target_id;
};
#define dev_to_rphy(d) \
container_of((d), struct sas_rphy, dev)
#define transport_class_to_rphy(dev) \
dev_to_rphy((dev)->parent)
#define rphy_to_shost(rphy) \
dev_to_shost((rphy)->dev.parent)
#define target_to_rphy(targ) \
dev_to_rphy((targ)->dev.parent)
struct sas_end_device {
struct sas_rphy rphy;
/* flags */
unsigned ready_led_meaning:1;
unsigned tlr_supported:1;
unsigned tlr_enabled:1;
/* parameters */
u16 I_T_nexus_loss_timeout;
u16 initiator_response_timeout;
};
#define rphy_to_end_device(r) \
container_of((r), struct sas_end_device, rphy)
struct sas_expander_device {
int level;
int next_port_id;
#define SAS_EXPANDER_VENDOR_ID_LEN 8
char vendor_id[SAS_EXPANDER_VENDOR_ID_LEN+1];
#define SAS_EXPANDER_PRODUCT_ID_LEN 16
char product_id[SAS_EXPANDER_PRODUCT_ID_LEN+1];
#define SAS_EXPANDER_PRODUCT_REV_LEN 4
char product_rev[SAS_EXPANDER_PRODUCT_REV_LEN+1];
#define SAS_EXPANDER_COMPONENT_VENDOR_ID_LEN 8
char component_vendor_id[SAS_EXPANDER_COMPONENT_VENDOR_ID_LEN+1];
u16 component_id;
u8 component_revision_id;
struct sas_rphy rphy;
};
#define rphy_to_expander_device(r) \
container_of((r), struct sas_expander_device, rphy)
struct sas_port {
struct device dev;
int port_identifier;
int num_phys;
/* port flags */
unsigned int is_backlink:1;
/* the other end of the link */
struct sas_rphy *rphy;
struct mutex phy_list_mutex;
struct list_head phy_list;
};
#define dev_to_sas_port(d) \
container_of((d), struct sas_port, dev)
#define transport_class_to_sas_port(dev) \
dev_to_sas_port((dev)->parent)
struct sas_phy_linkrates {
enum sas_linkrate maximum_linkrate;
enum sas_linkrate minimum_linkrate;
};
/* The functions by which the transport class and the driver communicate */
struct sas_function_template {
int (*get_linkerrors)(struct sas_phy *);
int (*get_enclosure_identifier)(struct sas_rphy *, u64 *);
int (*get_bay_identifier)(struct sas_rphy *);
int (*phy_reset)(struct sas_phy *, int);
int (*phy_enable)(struct sas_phy *, int);
int (*phy_setup)(struct sas_phy *);
void (*phy_release)(struct sas_phy *);
int (*set_phy_speed)(struct sas_phy *, struct sas_phy_linkrates *);
int (*smp_handler)(struct Scsi_Host *, struct sas_rphy *, struct request *);
};
void sas_remove_children(struct device *);
extern void sas_remove_host(struct Scsi_Host *);
extern struct sas_phy *sas_phy_alloc(struct device *, int);
extern void sas_phy_free(struct sas_phy *);
extern int sas_phy_add(struct sas_phy *);
extern void sas_phy_delete(struct sas_phy *);
extern int scsi_is_sas_phy(const struct device *);
u64 sas_get_address(struct scsi_device *);
unsigned int sas_tlr_supported(struct scsi_device *);
unsigned int sas_is_tlr_enabled(struct scsi_device *);
void sas_disable_tlr(struct scsi_device *);
void sas_enable_tlr(struct scsi_device *);
extern struct sas_rphy *sas_end_device_alloc(struct sas_port *);
extern struct sas_rphy *sas_expander_alloc(struct sas_port *, enum sas_device_type);
void sas_rphy_free(struct sas_rphy *);
extern int sas_rphy_add(struct sas_rphy *);
extern void sas_rphy_remove(struct sas_rphy *);
extern void sas_rphy_delete(struct sas_rphy *);
extern void sas_rphy_unlink(struct sas_rphy *);
struct sas_port *sas_port_alloc(struct device *, int);
struct sas_port *sas_port_alloc_num(struct device *);
int sas_port_add(struct sas_port *);
void sas_port_free(struct sas_port *);
void sas_port_delete(struct sas_port *);
void sas_port_add_phy(struct sas_port *, struct sas_phy *);
void sas_port_delete_phy(struct sas_port *, struct sas_phy *);
void sas_port_mark_backlink(struct sas_port *);
int scsi_is_sas_port(const struct device *);
struct sas_phy *sas_port_get_phy(struct sas_port *port);
static inline void sas_port_put_phy(struct sas_phy *phy)
{
if (phy)
put_device(&phy->dev);
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Dan J Williams | 24 | 100.00% | 1 | 100.00% |
| Total | 24 | 100.00% | 1 | 100.00% |
extern struct scsi_transport_template *
sas_attach_transport(struct sas_function_template *);
extern void sas_release_transport(struct scsi_transport_template *);
int sas_read_port_mode_page(struct scsi_device *);
static inline int
scsi_is_sas_expander_device(struct device *dev)
{
struct sas_rphy *rphy;
if (!scsi_is_sas_rphy(dev))
return 0;
rphy = dev_to_rphy(dev);
return rphy->identify.device_type == SAS_FANOUT_EXPANDER_DEVICE ||
rphy->identify.device_type == SAS_EDGE_EXPANDER_DEVICE;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| James Bottomley | 52 | 100.00% | 1 | 100.00% |
| Total | 52 | 100.00% | 1 | 100.00% |
#define scsi_is_sas_phy_local(phy) scsi_is_host_device((phy)->dev.parent)
#endif /* SCSI_TRANSPORT_SAS_H */
Overall Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| James Bottomley | 523 | 51.12% | 14 | 48.28% |
| Christoph Hellwig | 344 | 33.63% | 4 | 13.79% |
| Dan J Williams | 69 | 6.74% | 3 | 10.34% |
| Darrick J. Wong | 29 | 2.83% | 4 | 13.79% |
| Johannes Thumshirn | 26 | 2.54% | 1 | 3.45% |
| FUJITA Tomonori | 22 | 2.15% | 1 | 3.45% |
| Tony Jones | 6 | 0.59% | 1 | 3.45% |
| Sreekanth Reddy | 4 | 0.39% | 1 | 3.45% |
| Total | 1023 | 100.00% | 29 | 100.00% |
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.