Release 4.12 include/uapi/linux/atm.h
/* atm.h - general ATM declarations */
/* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */
/*
* WARNING: User-space programs should not #include <linux/atm.h> directly.
* Instead, #include <atm.h>
*/
#ifndef _UAPI_LINUX_ATM_H
#define _UAPI_LINUX_ATM_H
/*
* BEGIN_xx and END_xx markers are used for automatic generation of
* documentation. Do not change them.
*/
#include <linux/compiler.h>
#include <linux/atmapi.h>
#include <linux/atmsap.h>
#include <linux/atmioc.h>
#include <linux/types.h>
/* general ATM constants */
#define ATM_CELL_SIZE 53
/* ATM cell size incl. header */
#define ATM_CELL_PAYLOAD 48
/* ATM payload size */
#define ATM_AAL0_SDU 52
/* AAL0 SDU size */
#define ATM_MAX_AAL34_PDU 65535
/* maximum AAL3/4 PDU payload */
#define ATM_AAL5_TRAILER 8
/* AAL5 trailer size */
#define ATM_MAX_AAL5_PDU 65535
/* maximum AAL5 PDU payload */
#define ATM_MAX_CDV 9999
/* maximum (default) CDV */
#define ATM_NOT_RSV_VCI 32
/* first non-reserved VCI value */
#define ATM_MAX_VPI 255
/* maximum VPI at the UNI */
#define ATM_MAX_VPI_NNI 4096
/* maximum VPI at the NNI */
#define ATM_MAX_VCI 65535
/* maximum VCI */
/* "protcol" values for the socket system call */
#define ATM_NO_AAL 0
/* AAL not specified */
#define ATM_AAL0 13
/* "raw" ATM cells */
#define ATM_AAL1 1
/* AAL1 (CBR) */
#define ATM_AAL2 2
/* AAL2 (VBR) */
#define ATM_AAL34 3
/* AAL3/4 (data) */
#define ATM_AAL5 5
/* AAL5 (data) */
/*
* socket option name coding functions
*
* Note that __SO_ENCODE and __SO_LEVEL are somewhat a hack since the
* << 22 only reserves 9 bits for the level. On some architectures
* SOL_SOCKET is 0xFFFF, so that's a bit of a problem
*/
#define __SO_ENCODE(l,n,t) ((((l) & 0x1FF) << 22) | ((n) << 16) | \
sizeof(t))
#define __SO_LEVEL_MATCH(c,m) (((c) >> 22) == ((m) & 0x1FF))
#define __SO_NUMBER(c) (((c) >> 16) & 0x3f)
#define __SO_SIZE(c) ((c) & 0x3fff)
/*
* ATM layer
*/
#define SO_SETCLP __SO_ENCODE(SOL_ATM,0,int)
/* set CLP bit value - TODO */
#define SO_CIRANGE __SO_ENCODE(SOL_ATM,1,struct atm_cirange)
/* connection identifier range; socket must be
bound or connected */
#define SO_ATMQOS __SO_ENCODE(SOL_ATM,2,struct atm_qos)
/* Quality of Service setting */
#define SO_ATMSAP __SO_ENCODE(SOL_ATM,3,struct atm_sap)
/* Service Access Point */
#define SO_ATMPVC __SO_ENCODE(SOL_ATM,4,struct sockaddr_atmpvc)
/* "PVC" address (also for SVCs); get only */
#define SO_MULTIPOINT __SO_ENCODE(SOL_ATM, 5, int)
/* make this vc a p2mp */
/*
* Note @@@: since the socket layers don't really distinguish the control and
* the data plane but generally seems to be data plane-centric, any layer is
* about equally wrong for the SAP. If you have a better idea about this,
* please speak up ...
*/
/* ATM cell header (for AAL0) */
/* BEGIN_CH */
#define ATM_HDR_GFC_MASK 0xf0000000
#define ATM_HDR_GFC_SHIFT 28
#define ATM_HDR_VPI_MASK 0x0ff00000
#define ATM_HDR_VPI_SHIFT 20
#define ATM_HDR_VCI_MASK 0x000ffff0
#define ATM_HDR_VCI_SHIFT 4
#define ATM_HDR_PTI_MASK 0x0000000e
#define ATM_HDR_PTI_SHIFT 1
#define ATM_HDR_CLP 0x00000001
/* END_CH */
/* PTI codings */
/* BEGIN_PTI */
#define ATM_PTI_US0 0
/* user data cell, congestion not exp, SDU-type 0 */
#define ATM_PTI_US1 1
/* user data cell, congestion not exp, SDU-type 1 */
#define ATM_PTI_UCES0 2
/* user data cell, cong. experienced, SDU-type 0 */
#define ATM_PTI_UCES1 3
/* user data cell, cong. experienced, SDU-type 1 */
#define ATM_PTI_SEGF5 4
/* segment OAM F5 flow related cell */
#define ATM_PTI_E2EF5 5
/* end-to-end OAM F5 flow related cell */
#define ATM_PTI_RSV_RM 6
/* reserved for traffic control/resource mgmt */
#define ATM_PTI_RSV 7
/* reserved */
/* END_PTI */
/*
* The following items should stay in linux/atm.h, which should be linked to
* netatm/atm.h
*/
/* Traffic description */
#define ATM_NONE 0
/* no traffic */
#define ATM_UBR 1
#define ATM_CBR 2
#define ATM_VBR 3
#define ATM_ABR 4
#define ATM_ANYCLASS 5
/* compatible with everything */
#define ATM_MAX_PCR -1
/* maximum available PCR */
struct atm_trafprm {
unsigned char traffic_class; /* traffic class (ATM_UBR, ...) */
int max_pcr; /* maximum PCR in cells per second */
int pcr; /* desired PCR in cells per second */
int min_pcr; /* minimum PCR in cells per second */
int max_cdv; /* maximum CDV in microseconds */
int max_sdu; /* maximum SDU in bytes */
/* extra params for ABR */
unsigned int icr; /* Initial Cell Rate (24-bit) */
unsigned int tbe; /* Transient Buffer Exposure (24-bit) */
unsigned int frtt : 24; /* Fixed Round Trip Time (24-bit) */
unsigned int rif : 4; /* Rate Increment Factor (4-bit) */
unsigned int rdf : 4; /* Rate Decrease Factor (4-bit) */
unsigned int nrm_pres :1; /* nrm present bit */
unsigned int trm_pres :1; /* rm present bit */
unsigned int adtf_pres :1; /* adtf present bit */
unsigned int cdf_pres :1; /* cdf present bit*/
unsigned int nrm :3; /* Max # of Cells for each forward RM cell (3-bit) */
unsigned int trm :3; /* Time between forward RM cells (3-bit) */
unsigned int adtf :10; /* ACR Decrease Time Factor (10-bit) */
unsigned int cdf :3; /* Cutoff Decrease Factor (3-bit) */
unsigned int spare :9; /* spare bits */
};
struct atm_qos {
struct atm_trafprm txtp; /* parameters in TX direction */
struct atm_trafprm rxtp __ATM_API_ALIGN;
/* parameters in RX direction */
unsigned char aal __ATM_API_ALIGN;
};
/* PVC addressing */
#define ATM_ITF_ANY -1
/* "magic" PVC address values */
#define ATM_VPI_ANY -1
#define ATM_VCI_ANY -1
#define ATM_VPI_UNSPEC -2
#define ATM_VCI_UNSPEC -2
struct sockaddr_atmpvc {
unsigned short sap_family; /* address family, AF_ATMPVC */
struct { /* PVC address */
short itf; /* ATM interface */
short vpi; /* VPI (only 8 bits at UNI) */
int vci; /* VCI (only 16 bits at UNI) */
} sap_addr __ATM_API_ALIGN; /* PVC address */
};
/* SVC addressing */
#define ATM_ESA_LEN 20
/* ATM End System Address length */
#define ATM_E164_LEN 12
/* maximum E.164 number length */
#define ATM_AFI_DCC 0x39
/* DCC ATM Format */
#define ATM_AFI_ICD 0x47
/* ICD ATM Format */
#define ATM_AFI_E164 0x45
/* E.164 ATM Format */
#define ATM_AFI_LOCAL 0x49
/* Local ATM Format */
#define ATM_AFI_DCC_GROUP 0xBD
/* DCC ATM Group Format */
#define ATM_AFI_ICD_GROUP 0xC5
/* ICD ATM Group Format */
#define ATM_AFI_E164_GROUP 0xC3
/* E.164 ATM Group Format */
#define ATM_AFI_LOCAL_GROUP 0xC7
/* Local ATM Group Format */
#define ATM_LIJ_NONE 0
/* no leaf-initiated join */
#define ATM_LIJ 1
/* request joining */
#define ATM_LIJ_RPJ 2
/* set to root-prompted join */
#define ATM_LIJ_NJ 3
/* set to network join */
struct sockaddr_atmsvc {
unsigned short sas_family; /* address family, AF_ATMSVC */
struct { /* SVC address */
unsigned char prv[ATM_ESA_LEN];/* private ATM address */
char pub[ATM_E164_LEN+1]; /* public address (E.164) */
/* unused addresses must be bzero'ed */
char lij_type; /* role in LIJ call; one of ATM_LIJ* */
__u32 lij_id; /* LIJ call identifier */
} sas_addr __ATM_API_ALIGN; /* SVC address */
};
static __inline__ int atmsvc_addr_in_use(struct sockaddr_atmsvc addr)
{
return *addr.sas_addr.prv || *addr.sas_addr.pub;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| David Howells | 26 | 100.00% | 1 | 100.00% |
| Total | 26 | 100.00% | 1 | 100.00% |
static __inline__ int atmpvc_addr_in_use(struct sockaddr_atmpvc addr)
{
return addr.sap_addr.itf || addr.sap_addr.vpi || addr.sap_addr.vci;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| David Howells | 30 | 100.00% | 1 | 100.00% |
| Total | 30 | 100.00% | 1 | 100.00% |
/*
* Some stuff for linux/sockios.h
*/
struct atmif_sioc {
int number;
int length;
void __user *arg;
};
typedef unsigned short atm_backend_t;
#endif /* _UAPI_LINUX_ATM_H */
Overall Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| David Howells | 688 | 100.00% | 1 | 100.00% |
| Total | 688 | 100.00% | 1 | 100.00% |
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.