cregit-Linux how code gets into the kernel

Release 4.12 include/uapi/linux/rtc.h

/*
 * Generic RTC interface.
 * This version contains the part of the user interface to the Real Time Clock
 * service. It is used with both the legacy mc146818 and also  EFI
 * Struct rtc_time and first 12 ioctl by Paul Gortmaker, 1996 - separated out
 * from <linux/mc146818rtc.h> to this file for 2.4 kernels.
 *
 * Copyright (C) 1999 Hewlett-Packard Co.
 * Copyright (C) 1999 Stephane Eranian <eranian@hpl.hp.com>
 */
#ifndef _UAPI_LINUX_RTC_H_

#define _UAPI_LINUX_RTC_H_

/*
 * The struct used to pass data via the following ioctl. Similar to the
 * struct tm in <time.h>, but it needs to be here so that the kernel
 * source is self contained, allowing cross-compiles, etc. etc.
 */


struct rtc_time {
	
int tm_sec;
	
int tm_min;
	
int tm_hour;
	
int tm_mday;
	
int tm_mon;
	
int tm_year;
	
int tm_wday;
	
int tm_yday;
	
int tm_isdst;
};

/*
 * This data structure is inspired by the EFI (v0.92) wakeup
 * alarm API.
 */

struct rtc_wkalrm {
	
unsigned char enabled;	/* 0 = alarm disabled, 1 = alarm enabled */
	
unsigned char pending;  /* 0 = alarm not pending, 1 = alarm pending */
	
struct rtc_time time;	/* time the alarm is set to */
};

/*
 * Data structure to control PLL correction some better RTC feature
 * pll_value is used to get or set current value of correction,
 * the rest of the struct is used to query HW capabilities.
 * This is modeled after the RTC used in Q40/Q60 computers but
 * should be sufficiently flexible for other devices
 *
 * +ve pll_value means clock will run faster by
 *   pll_value*pll_posmult/pll_clock
 * -ve pll_value means clock will run slower by
 *   pll_value*pll_negmult/pll_clock
 */


struct rtc_pll_info {
	
int pll_ctrl;       /* placeholder for fancier control */
	
int pll_value;      /* get/set correction value */
	
int pll_max;        /* max +ve (faster) adjustment value */
	
int pll_min;        /* max -ve (slower) adjustment value */
	
int pll_posmult;    /* factor for +ve correction */
	
int pll_negmult;    /* factor for -ve correction */
	
long pll_clock;     /* base PLL frequency */
};

/*
 * ioctl calls that are permitted to the /dev/rtc interface, if
 * any of the RTC drivers are enabled.
 */


#define RTC_AIE_ON	_IO('p', 0x01)	
/* Alarm int. enable on         */

#define RTC_AIE_OFF	_IO('p', 0x02)	
/* ... off                      */

#define RTC_UIE_ON	_IO('p', 0x03)	
/* Update int. enable on        */

#define RTC_UIE_OFF	_IO('p', 0x04)	
/* ... off                      */

#define RTC_PIE_ON	_IO('p', 0x05)	
/* Periodic int. enable on      */

#define RTC_PIE_OFF	_IO('p', 0x06)	
/* ... off                      */

#define RTC_WIE_ON	_IO('p', 0x0f)  
/* Watchdog int. enable on      */

#define RTC_WIE_OFF	_IO('p', 0x10)  
/* ... off                      */


#define RTC_ALM_SET	_IOW('p', 0x07, struct rtc_time) 
/* Set alarm time  */

#define RTC_ALM_READ	_IOR('p', 0x08, struct rtc_time) 
/* Read alarm time */

#define RTC_RD_TIME	_IOR('p', 0x09, struct rtc_time) 
/* Read RTC time   */

#define RTC_SET_TIME	_IOW('p', 0x0a, struct rtc_time) 
/* Set RTC time    */

#define RTC_IRQP_READ	_IOR('p', 0x0b, unsigned long)	 
/* Read IRQ rate   */

#define RTC_IRQP_SET	_IOW('p', 0x0c, unsigned long)	 
/* Set IRQ rate    */

#define RTC_EPOCH_READ	_IOR('p', 0x0d, unsigned long)	 
/* Read epoch      */

#define RTC_EPOCH_SET	_IOW('p', 0x0e, unsigned long)	 
/* Set epoch       */


#define RTC_WKALM_SET	_IOW('p', 0x0f, struct rtc_wkalrm)
/* Set wakeup alarm*/

#define RTC_WKALM_RD	_IOR('p', 0x10, struct rtc_wkalrm)
/* Get wakeup alarm*/


#define RTC_PLL_GET	_IOR('p', 0x11, struct rtc_pll_info)  
/* Get PLL correction */

#define RTC_PLL_SET	_IOW('p', 0x12, struct rtc_pll_info)  
/* Set PLL correction */


#define RTC_VL_READ	_IOR('p', 0x13, int)	
/* Voltage low detector */

#define RTC_VL_CLR	_IO('p', 0x14)		
/* Clear voltage low information */

/* interrupt flags */

#define RTC_IRQF 0x80	
/* Any of the following is active */

#define RTC_PF 0x40	
/* Periodic interrupt */

#define RTC_AF 0x20	
/* Alarm interrupt */

#define RTC_UF 0x10	
/* Update interrupt for 1Hz RTC */



#define RTC_MAX_FREQ	8192


#endif /* _UAPI_LINUX_RTC_H_ */

Overall Contributors

PersonTokensPropCommitsCommitProp
David Howells234100.00%1100.00%
Total234100.00%1100.00%
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with cregit.