Release 4.13 drivers/pci/setup-irq.c
/*
* drivers/pci/setup-irq.c
*
* Extruded from code written by
* Dave Rusling (david.rusling@reo.mts.dec.com)
* David Mosberger (davidm@cs.arizona.edu)
* David Miller (davem@redhat.com)
*
* Support routines for initializing a PCI subsystem.
*/
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/errno.h>
#include <linux/ioport.h>
#include <linux/cache.h>
#include "pci.h"
void __weak pcibios_update_irq(struct pci_dev *dev, int irq)
{
dev_dbg(&dev->dev, "assigning IRQ %02d\n", irq);
pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Thierry Reding | 35 | 100.00% | 1 | 100.00% |
| Total | 35 | 100.00% | 1 | 100.00% |
void pci_assign_irq(struct pci_dev *dev)
{
u8 pin;
u8 slot = -1;
int irq = 0;
struct pci_host_bridge *hbrg = pci_find_host_bridge(dev->bus);
if (!(hbrg->map_irq)) {
dev_dbg(&dev->dev, "runtime IRQ mapping not provided by arch\n");
return;
}
/* If this device is not on the primary bus, we need to figure out
which interrupt pin it will come in on. We know which slot it
will come in on 'cos that slot is where the bridge is. Each
time the interrupt line passes through a PCI-PCI bridge we must
apply the swizzle function. */
pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
/* Cope with illegal. */
if (pin > 4)
pin = 1;
if (pin) {
/* Follow the chain of bridges, swizzling as we go. */
if (hbrg->swizzle_irq)
slot = (*(hbrg->swizzle_irq))(dev, &pin);
/*
* If a swizzling function is not used map_irq must
* ignore slot
*/
irq = (*(hbrg->map_irq))(dev, slot, pin);
if (irq == -1)
irq = 0;
}
dev->irq = irq;
dev_dbg(&dev->dev, "assign IRQ: got %d\n", dev->irq);
/* Always tell the device, so the driver knows what is
the real IRQ to use; the device does not use it. */
pcibios_update_irq(dev, irq);
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Linus Torvalds (pre-git) | 83 | 49.40% | 1 | 14.29% |
| Matthew Minter | 70 | 41.67% | 1 | 14.29% |
| Andreas Block | 9 | 5.36% | 1 | 14.29% |
| Björn Helgaas | 3 | 1.79% | 2 | 28.57% |
| Greg Kroah-Hartman | 2 | 1.19% | 1 | 14.29% |
| Matthew Wilcox | 1 | 0.60% | 1 | 14.29% |
| Total | 168 | 100.00% | 7 | 100.00% |
void pci_fixup_irqs(u8 (*swizzle)(struct pci_dev *, u8 *),
int (*map_irq)(const struct pci_dev *, u8, u8))
{
/*
* Implement pci_fixup_irqs() through pci_assign_irq().
* This code should be remove eventually, it is a wrapper
* around pci_assign_irq() interface to keep current
* pci_fixup_irqs() behaviour unchanged on architecture
* code still relying on its interface.
*/
struct pci_dev *dev = NULL;
struct pci_host_bridge *hbrg = NULL;
for_each_pci_dev(dev) {
hbrg = pci_find_host_bridge(dev->bus);
hbrg->swizzle_irq = swizzle;
hbrg->map_irq = map_irq;
pci_assign_irq(dev);
hbrg->swizzle_irq = NULL;
hbrg->map_irq = NULL;
}
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Linus Torvalds (pre-git) | 46 | 48.94% | 1 | 16.67% |
| Matthew Minter | 42 | 44.68% | 1 | 16.67% |
| Vasiliy Kulikov | 2 | 2.13% | 1 | 16.67% |
| Greg Kroah-Hartman | 2 | 2.13% | 1 | 16.67% |
| Ryan Desfosses | 1 | 1.06% | 1 | 16.67% |
| Ralf Bächle | 1 | 1.06% | 1 | 16.67% |
| Total | 94 | 100.00% | 6 | 100.00% |
EXPORT_SYMBOL_GPL(pci_fixup_irqs);
Overall Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Linus Torvalds (pre-git) | 145 | 45.17% | 1 | 7.69% |
| Matthew Minter | 115 | 35.83% | 1 | 7.69% |
| Thierry Reding | 35 | 10.90% | 1 | 7.69% |
| Andreas Block | 9 | 2.80% | 1 | 7.69% |
| Ray Jui | 5 | 1.56% | 1 | 7.69% |
| Greg Kroah-Hartman | 4 | 1.25% | 2 | 15.38% |
| Björn Helgaas | 3 | 0.93% | 2 | 15.38% |
| Vasiliy Kulikov | 2 | 0.62% | 1 | 7.69% |
| Matthew Wilcox | 1 | 0.31% | 1 | 7.69% |
| Ralf Bächle | 1 | 0.31% | 1 | 7.69% |
| Ryan Desfosses | 1 | 0.31% | 1 | 7.69% |
| Total | 321 | 100.00% | 13 | 100.00% |
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.