cregit-Linux how code gets into the kernel

Release 4.14 arch/alpha/kernel/sys_rx164.c

// SPDX-License-Identifier: GPL-2.0
/*
 *      linux/arch/alpha/kernel/sys_rx164.c
 *
 *      Copyright (C) 1995 David A Rusling
 *      Copyright (C) 1996 Jay A Estabrook
 *      Copyright (C) 1998, 1999 Richard Henderson
 *
 * Code supporting the RX164 (PCA56+POLARIS).
 */

#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/mm.h>
#include <linux/sched.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/bitops.h>

#include <asm/ptrace.h>
#include <asm/dma.h>
#include <asm/irq.h>
#include <asm/mmu_context.h>
#include <asm/io.h>
#include <asm/pgtable.h>
#include <asm/core_polaris.h>
#include <asm/tlbflush.h>

#include "proto.h"
#include "irq_impl.h"
#include "pci_impl.h"
#include "machvec_impl.h"


/* Note mask bit is true for ENABLED irqs.  */

static unsigned long cached_irq_mask;


static inline void rx164_update_irq_hw(unsigned long mask) { volatile unsigned int *irq_mask; irq_mask = (void *)(POLARIS_DENSE_CONFIG_BASE + 0x74); *irq_mask = mask; mb(); *irq_mask; }

Contributors

PersonTokensPropCommitsCommitProp
Ivan Kokshaysky2255.00%133.33%
Linus Torvalds (pre-git)1845.00%266.67%
Total40100.00%3100.00%


static inline void rx164_enable_irq(struct irq_data *d) { rx164_update_irq_hw(cached_irq_mask |= 1UL << (d->irq - 16)); }

Contributors

PersonTokensPropCommitsCommitProp
Linus Torvalds (pre-git)2177.78%266.67%
Thomas Gleixner622.22%133.33%
Total27100.00%3100.00%


static void rx164_disable_irq(struct irq_data *d) { rx164_update_irq_hw(cached_irq_mask &= ~(1UL << (d->irq - 16))); }

Contributors

PersonTokensPropCommitsCommitProp
Linus Torvalds (pre-git)2379.31%266.67%
Thomas Gleixner620.69%133.33%
Total29100.00%3100.00%

static struct irq_chip rx164_irq_type = { .name = "RX164", .irq_unmask = rx164_enable_irq, .irq_mask = rx164_disable_irq, .irq_mask_ack = rx164_disable_irq, };
static void rx164_device_interrupt(unsigned long vector) { unsigned long pld; volatile unsigned int *dirr; long i; /* Read the interrupt summary register. On Polaris, this is the DIRR register in PCI config space (offset 0x84). */ dirr = (void *)(POLARIS_DENSE_CONFIG_BASE + 0x84); pld = *dirr; /* * Now for every possible bit set, work through them and call * the appropriate interrupt handler. */ while (pld) { i = ffz(~pld); pld &= pld - 1; /* clear least bit set */ if (i == 20) { isa_no_iack_sc_device_interrupt(vector); } else { handle_irq(16+i); } } }

Contributors

PersonTokensPropCommitsCommitProp
Linus Torvalds (pre-git)6879.07%266.67%
Ivan Kokshaysky1820.93%133.33%
Total86100.00%3100.00%


static void __init rx164_init_irq(void) { long i; rx164_update_irq_hw(0); for (i = 16; i < 40; ++i) { irq_set_chip_and_handler(i, &rx164_irq_type, handle_level_irq); irq_set_status_flags(i, IRQ_LEVEL); } init_i8259a_irqs(); common_init_isa_dma(); setup_irq(16+20, &isa_cascade_irqaction); }

Contributors

PersonTokensPropCommitsCommitProp
Linus Torvalds (pre-git)5280.00%233.33%
Thomas Gleixner812.31%233.33%
Kyle McMartin57.69%233.33%
Total65100.00%6100.00%

/* * The RX164 changed its interrupt routing between pass1 and pass2... * * PASS1: * * Slot IDSEL INTA INTB INTC INTD * 0 6 5 10 15 20 * 1 7 4 9 14 19 * 2 5 3 8 13 18 * 3 9 2 7 12 17 * 4 10 1 6 11 16 * * PASS2: * Slot IDSEL INTA INTB INTC INTD * 0 5 1 7 12 17 * 1 6 2 8 13 18 * 2 8 3 9 14 19 * 3 9 4 10 15 20 * 4 10 5 11 16 6 * */ /* * IdSel * 5 32 bit PCI option slot 0 * 6 64 bit PCI option slot 1 * 7 PCI-ISA bridge * 7 64 bit PCI option slot 2 * 9 32 bit PCI option slot 3 * 10 PCI-PCI bridge * */
static int rx164_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { #if 0 static char irq_tab_pass1[6][5] __initdata = { /*INT INTA INTB INTC INTD */ { 16+3, 16+3, 16+8, 16+13, 16+18}, /* IdSel 5, slot 2 */ { 16+5, 16+5, 16+10, 16+15, 16+20}, /* IdSel 6, slot 0 */ { 16+4, 16+4, 16+9, 16+14, 16+19}, /* IdSel 7, slot 1 */ { -1, -1, -1, -1, -1}, /* IdSel 8, PCI/ISA bridge */ { 16+2, 16+2, 16+7, 16+12, 16+17}, /* IdSel 9, slot 3 */ { 16+1, 16+1, 16+6, 16+11, 16+16}, /* IdSel 10, slot 4 */ }; #else static char irq_tab[6][5] = { /*INT INTA INTB INTC INTD */ { 16+0, 16+0, 16+6, 16+11, 16+16}, /* IdSel 5, slot 0 */ { 16+1, 16+1, 16+7, 16+12, 16+17}, /* IdSel 6, slot 1 */ { -1, -1, -1, -1, -1}, /* IdSel 7, PCI/ISA bridge */ { 16+2, 16+2, 16+8, 16+13, 16+18}, /* IdSel 8, slot 2 */ { 16+3, 16+3, 16+9, 16+14, 16+19}, /* IdSel 9, slot 3 */ { 16+4, 16+4, 16+10, 16+15, 16+5}, /* IdSel 10, PCI-PCI */ }; #endif const long min_idsel = 5, max_idsel = 10, irqs_per_slot = 5; /* JRP - Need to figure out how to distinguish pass1 from pass2, and use the correct table. */ return COMMON_TABLE_LOOKUP; }

Contributors

PersonTokensPropCommitsCommitProp
Linus Torvalds (pre-git)20499.51%480.00%
Ralf Bächle10.49%120.00%
Total205100.00%5100.00%

/* * The System Vector */ struct alpha_machine_vector rx164_mv __initmv = { .vector_name = "RX164", DO_EV5_MMU, DO_DEFAULT_RTC, DO_POLARIS_IO, .machine_check = polaris_machine_check, .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS, .min_io_address = DEFAULT_IO_BASE, .min_mem_address = DEFAULT_MEM_BASE, .nr_irqs = 40, .device_interrupt = rx164_device_interrupt, .init_arch = polaris_init_arch, .init_irq = rx164_init_irq, .init_rtc = common_init_rtc, .init_pci = common_init_pci, .kill_arch = NULL, .pci_map_irq = rx164_map_irq, .pci_swizzle = common_swizzle, }; ALIAS_MV(rx164)

Overall Contributors

PersonTokensPropCommitsCommitProp
Linus Torvalds (pre-git)51781.55%527.78%
Ivan Kokshaysky426.62%211.11%
Richard Henderson396.15%211.11%
Thomas Gleixner253.94%422.22%
Kyle McMartin50.79%211.11%
Adrian Bunk40.63%15.56%
Ralf Bächle10.16%15.56%
Greg Kroah-Hartman10.16%15.56%
Total634100.00%18100.00%
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with cregit.