cregit-Linux how code gets into the kernel

Release 4.14 arch/blackfin/mach-bf533/ints-priority.c

/*
 * Set up the interrupt priorities
 *
 * Copyright 2005-2009 Analog Devices Inc.
 *
 * Licensed under the GPL-2 or later.
 */

#include <linux/module.h>
#include <linux/irq.h>
#include <asm/blackfin.h>


void __init program_IAR(void) { /* Program the IAR0 Register with the configured priority */ bfin_write_SIC_IAR0(((CONFIG_PLLWAKE_ERROR - 7) << PLLWAKE_ERROR_POS) | ((CONFIG_DMA_ERROR - 7) << DMA_ERROR_POS) | ((CONFIG_PPI_ERROR - 7) << PPI_ERROR_POS) | ((CONFIG_SPORT0_ERROR - 7) << SPORT0_ERROR_POS) | ((CONFIG_SPI_ERROR - 7) << SPI_ERROR_POS) | ((CONFIG_SPORT1_ERROR - 7) << SPORT1_ERROR_POS) | ((CONFIG_UART_ERROR - 7) << UART_ERROR_POS) | ((CONFIG_RTC_ERROR - 7) << RTC_ERROR_POS)); bfin_write_SIC_IAR1(((CONFIG_DMA0_PPI - 7) << DMA0_PPI_POS) | ((CONFIG_DMA1_SPORT0RX - 7) << DMA1_SPORT0RX_POS) | ((CONFIG_DMA2_SPORT0TX - 7) << DMA2_SPORT0TX_POS) | ((CONFIG_DMA3_SPORT1RX - 7) << DMA3_SPORT1RX_POS) | ((CONFIG_DMA4_SPORT1TX - 7) << DMA4_SPORT1TX_POS) | ((CONFIG_DMA5_SPI - 7) << DMA5_SPI_POS) | ((CONFIG_DMA6_UARTRX - 7) << DMA6_UARTRX_POS) | ((CONFIG_DMA7_UARTTX - 7) << DMA7_UARTTX_POS)); bfin_write_SIC_IAR2(((CONFIG_TIMER0 - 7) << TIMER0_POS) | ((CONFIG_TIMER1 - 7) << TIMER1_POS) | ((CONFIG_TIMER2 - 7) << TIMER2_POS) | ((CONFIG_PFA - 7) << PFA_POS) | ((CONFIG_PFB - 7) << PFB_POS) | ((CONFIG_MEMDMA0 - 7) << MEMDMA0_POS) | ((CONFIG_MEMDMA1 - 7) << MEMDMA1_POS) | ((CONFIG_WDTIMER - 7) << WDTIMER_POS)); SSYNC(); }

Contributors

PersonTokensPropCommitsCommitProp
Bryan Wu26099.62%150.00%
Mike Frysinger10.38%150.00%
Total261100.00%2100.00%


Overall Contributors

PersonTokensPropCommitsCommitProp
Bryan Wu26798.52%125.00%
Mike Frysinger31.11%250.00%
Robin Getz10.37%125.00%
Total271100.00%4100.00%
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with cregit.