cregit-Linux how code gets into the kernel

Release 4.14 arch/cris/arch-v10/drivers/axisflashmap.c

/*
 * Physical mapping layer for MTD using the Axis partitiontable format
 *
 * Copyright (c) 2001, 2002 Axis Communications AB
 *
 * This file is under the GPL.
 *
 * First partition is always sector 0 regardless of if we find a partitiontable
 * or not. In the start of the next sector, there can be a partitiontable that
 * tells us what other partitions to define. If there isn't, we use a default
 * partition split defined below.
 *
 */

#include <linux/module.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/slab.h>

#include <linux/mtd/concat.h>
#include <linux/mtd/map.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/mtdram.h>
#include <linux/mtd/partitions.h>

#include <asm/axisflashmap.h>
#include <asm/mmu.h>
#include <arch/sv_addr_ag.h>

#ifdef CONFIG_CRIS_LOW_MAP

#define FLASH_UNCACHED_ADDR  KSEG_8

#define FLASH_CACHED_ADDR    KSEG_5
#else

#define FLASH_UNCACHED_ADDR  KSEG_E

#define FLASH_CACHED_ADDR    KSEG_F
#endif

#if CONFIG_ETRAX_FLASH_BUSWIDTH==1

#define flash_data __u8
#elif CONFIG_ETRAX_FLASH_BUSWIDTH==2

#define flash_data __u16
#elif CONFIG_ETRAX_FLASH_BUSWIDTH==4

#define flash_data __u32
#endif

/* From head.S */
extern unsigned long romfs_start, romfs_length, romfs_in_flash;

/* The master mtd for the entire flash. */

struct mtd_info* axisflash_mtd = NULL;

/* Map driver functions. */


static map_word flash_read(struct map_info *map, unsigned long ofs) { map_word tmp; tmp.x[0] = *(flash_data *)(map->map_priv_1 + ofs); return tmp; }

Contributors

PersonTokensPropCommitsCommitProp
Linus Torvalds2356.10%133.33%
Mikael Starvik1843.90%266.67%
Total41100.00%3100.00%


static void flash_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len) { memcpy(to, (void *)(map->map_priv_1 + from), len); }

Contributors

PersonTokensPropCommitsCommitProp
Linus Torvalds3892.68%150.00%
Mikael Starvik37.32%150.00%
Total41100.00%2100.00%


static void flash_write(struct map_info *map, map_word d, unsigned long adr) { *(flash_data *)(map->map_priv_1 + adr) = (flash_data)d.x[0]; }

Contributors

PersonTokensPropCommitsCommitProp
Linus Torvalds2970.73%133.33%
Mikael Starvik1229.27%266.67%
Total41100.00%3100.00%

/* * The map for chip select e0. * * We run into tricky coherence situations if we mix cached with uncached * accesses to we only use the uncached version here. * * The size field is the total size where the flash chips may be mapped on the * chip select. MTD probes should find all devices there and it does not matter * if there are unmapped gaps or aliases (mirrors of flash devices). The MTD * probes will ignore them. * * The start address in map_priv_1 is in virtual memory so we cannot use * MEM_CSE0_START but must rely on that FLASH_UNCACHED_ADDR is the start * address of cse0. */ static struct map_info map_cse0 = { .name = "cse0", .size = MEM_CSE0_SIZE, .bankwidth = CONFIG_ETRAX_FLASH_BUSWIDTH, .read = flash_read, .copy_from = flash_copy_from, .write = flash_write, .map_priv_1 = FLASH_UNCACHED_ADDR }; /* * The map for chip select e1. * * If there was a gap between cse0 and cse1, map_priv_1 would get the wrong * address, but there isn't. */ static struct map_info map_cse1 = { .name = "cse1", .size = MEM_CSE1_SIZE, .bankwidth = CONFIG_ETRAX_FLASH_BUSWIDTH, .read = flash_read, .copy_from = flash_copy_from, .write = flash_write, .map_priv_1 = FLASH_UNCACHED_ADDR + MEM_CSE0_SIZE }; /* If no partition-table was found, we use this default-set. */ #define MAX_PARTITIONS 7 #define NUM_DEFAULT_PARTITIONS 3 /* * Default flash size is 2MB. CONFIG_ETRAX_PTABLE_SECTOR is most likely the * size of one flash block and "filesystem"-partition needs 5 blocks to be able * to use JFFS. */ static struct mtd_partition axis_default_partitions[NUM_DEFAULT_PARTITIONS] = { { .name = "boot firmware", .size = CONFIG_ETRAX_PTABLE_SECTOR, .offset = 0 }, { .name = "kernel", .size = 0x200000 - (6 * CONFIG_ETRAX_PTABLE_SECTOR), .offset = CONFIG_ETRAX_PTABLE_SECTOR }, { .name = "filesystem", .size = 5 * CONFIG_ETRAX_PTABLE_SECTOR, .offset = 0x200000 - (5 * CONFIG_ETRAX_PTABLE_SECTOR) } }; /* Initialize the ones normally used. */ static struct mtd_partition axis_partitions[MAX_PARTITIONS] = { { .name = "part0", .size = CONFIG_ETRAX_PTABLE_SECTOR, .offset = 0 }, { .name = "part1", .size = 0, .offset = 0 }, { .name = "part2", .size = 0, .offset = 0 }, { .name = "part3", .size = 0, .offset = 0 }, { .name = "part4", .size = 0, .offset = 0 }, { .name = "part5", .size = 0, .offset = 0 }, { .name = "part6", .size = 0, .offset = 0 }, }; /* * Probe a chip select for AMD-compatible (JEDEC) or CFI-compatible flash * chips in that order (because the amd_flash-driver is faster). */
static struct mtd_info *probe_cs(struct map_info *map_cs) { struct mtd_info *mtd_cs = NULL; printk(KERN_INFO "%s: Probing a 0x%08lx bytes large window at 0x%08lx.\n", map_cs->name, map_cs->size, map_cs->map_priv_1); #ifdef CONFIG_MTD_CFI mtd_cs = do_map_probe("cfi_probe", map_cs); #endif #ifdef CONFIG_MTD_JEDECPROBE if (!mtd_cs) mtd_cs = do_map_probe("jedec_probe", map_cs); #endif return mtd_cs; }

Contributors

PersonTokensPropCommitsCommitProp
Linus Torvalds4155.41%457.14%
Mikael Starvik2837.84%114.29%
Jesper Nilsson45.41%114.29%
Andrew Morton11.35%114.29%
Total74100.00%7100.00%

/* * Probe each chip select individually for flash chips. If there are chips on * both cse0 and cse1, the mtd_info structs will be concatenated to one struct * so that MTD partitions can cross chip boundaries. * * The only known restriction to how you can mount your chips is that each * chip select must hold similar flash chips. But you need external hardware * to do that anyway and you can put totally different chips on cse0 and cse1 * so it isn't really much of a restriction. */
static struct mtd_info *flash_probe(void) { struct mtd_info *mtd_cse0; struct mtd_info *mtd_cse1; struct mtd_info *mtd_cse; mtd_cse0 = probe_cs(&map_cse0); mtd_cse1 = probe_cs(&map_cse1); if (!mtd_cse0 && !mtd_cse1) { /* No chip found. */ return NULL; } if (mtd_cse0 && mtd_cse1) { struct mtd_info *mtds[] = { mtd_cse0, mtd_cse1 }; /* Since the concatenation layer adds a small overhead we * could try to figure out if the chips in cse0 and cse1 are * identical and reprobe the whole cse0+cse1 window. But since * flash chips are slow, the overhead is relatively small. * So we use the MTD concatenation layer instead of further * complicating the probing procedure. */ mtd_cse = mtd_concat_create(mtds, ARRAY_SIZE(mtds), "cse0+cse1"); if (!mtd_cse) { printk(KERN_ERR "%s and %s: Concatenation failed!\n", map_cse0.name, map_cse1.name); /* The best we can do now is to only use what we found * at cse0. */ mtd_cse = mtd_cse0; map_destroy(mtd_cse1); } } else { mtd_cse = mtd_cse0? mtd_cse0 : mtd_cse1; } return mtd_cse; }

Contributors

PersonTokensPropCommitsCommitProp
Mikael Starvik12693.33%133.33%
Linus Torvalds85.93%133.33%
Ahmed S. Darwish10.74%133.33%
Total135100.00%3100.00%

/* * Probe the flash chip(s) and, if it succeeds, read the partition-table * and register the partitions with MTD. */
static int __init init_axis_flash(void) { struct mtd_info *mymtd; int err = 0; int pidx = 0; struct partitiontable_head *ptable_head = NULL; struct partitiontable_entry *ptable; int use_default_ptable = 1; /* Until proven otherwise. */ const char pmsg[] = " /dev/flash%d at 0x%08x, size 0x%08x\n"; if (!(mymtd = flash_probe())) { /* There's no reason to use this module if no flash chip can * be identified. Make sure that's understood. */ printk(KERN_INFO "axisflashmap: Found no flash chip.\n"); } else { printk(KERN_INFO "%s: 0x%08x bytes of flash memory.\n", mymtd->name, mymtd->size); axisflash_mtd = mymtd; } if (mymtd) { mymtd->owner = THIS_MODULE; ptable_head = (struct partitiontable_head *)(FLASH_CACHED_ADDR + CONFIG_ETRAX_PTABLE_SECTOR + PARTITION_TABLE_OFFSET); } pidx++; /* First partition is always set to the default. */ if (ptable_head && (ptable_head->magic == PARTITION_TABLE_MAGIC) && (ptable_head->size < (MAX_PARTITIONS * sizeof(struct partitiontable_entry) + PARTITIONTABLE_END_MARKER_SIZE)) && (*(unsigned long*)((void*)ptable_head + sizeof(*ptable_head) + ptable_head->size - PARTITIONTABLE_END_MARKER_SIZE) == PARTITIONTABLE_END_MARKER)) { /* Looks like a start, sane length and end of a * partition table, lets check csum etc. */ int ptable_ok = 0; struct partitiontable_entry *max_addr = (struct partitiontable_entry *) ((unsigned long)ptable_head + sizeof(*ptable_head) + ptable_head->size); unsigned long offset = CONFIG_ETRAX_PTABLE_SECTOR; unsigned char *p; unsigned long csum = 0; ptable = (struct partitiontable_entry *) ((unsigned long)ptable_head + sizeof(*ptable_head)); /* Lets be PARANOID, and check the checksum. */ p = (unsigned char*) ptable; while (p <= (unsigned char*)max_addr) { csum += *p++; csum += *p++; csum += *p++; csum += *p++; } ptable_ok = (csum == ptable_head->checksum); /* Read the entries and use/show the info. */ printk(KERN_INFO " Found a%s partition table at 0x%p-0x%p.\n", (ptable_ok ? " valid" : "n invalid"), ptable_head, max_addr); /* We have found a working bootblock. Now read the * partition table. Scan the table. It ends when * there is 0xffffffff, that is, empty flash. */ while (ptable_ok && ptable->offset != 0xffffffff && ptable < max_addr && pidx < MAX_PARTITIONS) { axis_partitions[pidx].offset = offset + ptable->offset; axis_partitions[pidx].size = ptable->size; printk(pmsg, pidx, axis_partitions[pidx].offset, axis_partitions[pidx].size); pidx++; ptable++; } use_default_ptable = !ptable_ok; } if (romfs_in_flash) { /* Add an overlapping device for the root partition (romfs). */ axis_partitions[pidx].name = "romfs"; axis_partitions[pidx].size = romfs_length; axis_partitions[pidx].offset = romfs_start - FLASH_CACHED_ADDR; axis_partitions[pidx].mask_flags |= MTD_WRITEABLE; printk(KERN_INFO " Adding readonly flash partition for romfs image:\n"); printk(pmsg, pidx, axis_partitions[pidx].offset, axis_partitions[pidx].size); pidx++; } if (mymtd) { if (use_default_ptable) { printk(KERN_INFO " Using default partition table.\n"); err = mtd_device_register(mymtd, axis_default_partitions, NUM_DEFAULT_PARTITIONS); } else { err = mtd_device_register(mymtd, axis_partitions, pidx); } if (err) panic("axisflashmap could not add MTD partitions!\n"); } if (!romfs_in_flash) { /* Create an RAM device for the root partition (romfs). */ #if !defined(CONFIG_MTD_MTDRAM) || (CONFIG_MTDRAM_TOTAL_SIZE != 0) /* No use trying to boot this kernel from RAM. Panic! */ printk(KERN_EMERG "axisflashmap: Cannot create an MTD RAM " "device due to kernel (mis)configuration!\n"); panic("This kernel cannot boot from RAM!\n"); #else struct mtd_info *mtd_ram; mtd_ram = kmalloc(sizeof(struct mtd_info), GFP_KERNEL); if (!mtd_ram) panic("axisflashmap couldn't allocate memory for " "mtd_info!\n"); printk(KERN_INFO " Adding RAM partition for romfs image:\n"); printk(pmsg, pidx, (unsigned)romfs_start, (unsigned)romfs_length); err = mtdram_init_device(mtd_ram, (void *)romfs_start, romfs_length, "romfs"); if (err) panic("axisflashmap could not initialize MTD RAM " "device!\n"); #endif } return err; }

Contributors

PersonTokensPropCommitsCommitProp
Linus Torvalds38258.41%555.56%
Mikael Starvik23335.63%111.11%
Andrew Morton304.59%111.11%
Jesper Nilsson71.07%111.11%
Jamie Iles20.31%111.11%
Total654100.00%9100.00%

/* This adds the above to the kernels init-call chain. */ module_init(init_axis_flash); EXPORT_SYMBOL(axisflash_mtd);

Overall Contributors

PersonTokensPropCommitsCommitProp
Linus Torvalds74852.90%633.33%
Mikael Starvik53037.48%316.67%
Art Haas725.09%15.56%
Andrew Morton443.11%15.56%
Jesper Nilsson130.92%316.67%
Tim Schmielau30.21%15.56%
Jamie Iles20.14%15.56%
Ahmed S. Darwish10.07%15.56%
Adam Buchbinder10.07%15.56%
Total1414100.00%18100.00%
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with cregit.