Release 4.14 arch/ia64/include/asm/sn/klconfig.h
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Derived from IRIX <sys/SN/klconfig.h>.
*
* Copyright (C) 1992-1997,1999,2001-2004 Silicon Graphics, Inc. All Rights Reserved.
* Copyright (C) 1999 by Ralf Baechle
*/
#ifndef _ASM_IA64_SN_KLCONFIG_H
#define _ASM_IA64_SN_KLCONFIG_H
/*
* The KLCONFIG structures store info about the various BOARDs found
* during Hardware Discovery. In addition, it stores info about the
* components found on the BOARDs.
*/
typedef s32 klconf_off_t;
/* Functions/macros needed to use this structure */
typedef struct kl_config_hdr {
char pad[20];
klconf_off_t ch_board_info; /* the link list of boards */
char pad0[88];
} kl_config_hdr_t;
#define NODE_OFFSET_TO_LBOARD(nasid,off) (lboard_t*)(GLOBAL_CAC_ADDR((nasid), (off)))
/*
* The KLCONFIG area is organized as a LINKED LIST of BOARDs. A BOARD
* can be either 'LOCAL' or 'REMOTE'. LOCAL means it is attached to
* the LOCAL/current NODE. REMOTE means it is attached to a different
* node.(TBD - Need a way to treat ROUTER boards.)
*
* There are 2 different structures to represent these boards -
* lboard - Local board, rboard - remote board. These 2 structures
* can be arbitrarily mixed in the LINKED LIST of BOARDs. (Refer
* Figure below). The first byte of the rboard or lboard structure
* is used to find out its type - no unions are used.
* If it is a lboard, then the config info of this board will be found
* on the local node. (LOCAL NODE BASE + offset value gives pointer to
* the structure.
* If it is a rboard, the local structure contains the node number
* and the offset of the beginning of the LINKED LIST on the remote node.
* The details of the hardware on a remote node can be built locally,
* if required, by reading the LINKED LIST on the remote node and
* ignoring all the rboards on that node.
*
* The local node uses the REMOTE NODE NUMBER + OFFSET to point to the
* First board info on the remote node. The remote node list is
* traversed as the local list, using the REMOTE BASE ADDRESS and not
* the local base address and ignoring all rboard values.
*
*
KLCONFIG
+------------+ +------------+ +------------+ +------------+
| lboard | +-->| lboard | +-->| rboard | +-->| lboard |
+------------+ | +------------+ | +------------+ | +------------+
| board info | | | board info | | |errinfo,bptr| | | board info |
+------------+ | +------------+ | +------------+ | +------------+
| offset |--+ | offset |--+ | offset |--+ |offset=NULL |
+------------+ +------------+ +------------+ +------------+
+------------+
| board info |
+------------+ +--------------------------------+
| compt 1 |------>| type, rev, diaginfo, size ... | (CPU)
+------------+ +--------------------------------+
| compt 2 |--+
+------------+ | +--------------------------------+
| ... | +--->| type, rev, diaginfo, size ... | (MEM_BANK)
+------------+ +--------------------------------+
| errinfo |--+
+------------+ | +--------------------------------+
+--->|r/l brd errinfo,compt err flags |
+--------------------------------+
*
* Each BOARD consists of COMPONENTs and the BOARD structure has
* pointers (offsets) to its COMPONENT structure.
* The COMPONENT structure has version info, size and speed info, revision,
* error info and the NIC info. This structure can accommodate any
* BOARD with arbitrary COMPONENT composition.
*
* The ERRORINFO part of each BOARD has error information
* that describes errors about the BOARD itself. It also has flags to
* indicate the COMPONENT(s) on the board that have errors. The error
* information specific to the COMPONENT is present in the respective
* COMPONENT structure.
*
* The ERRORINFO structure is also treated like a COMPONENT, ie. the
* BOARD has pointers(offset) to the ERRORINFO structure. The rboard
* structure also has a pointer to the ERRORINFO structure. This is
* the place to store ERRORINFO about a REMOTE NODE, if the HUB on
* that NODE is not working or if the REMOTE MEMORY is BAD. In cases where
* only the CPU of the REMOTE NODE is disabled, the ERRORINFO pointer can
* be a NODE NUMBER, REMOTE OFFSET combination, pointing to error info
* which is present on the REMOTE NODE.(TBD)
* REMOTE ERRINFO can be stored on any of the nearest nodes
* or on all the nearest nodes.(TBD)
* Like BOARD structures, REMOTE ERRINFO structures can be built locally
* using the rboard errinfo pointer.
*
* In order to get useful information from this Data organization, a set of
* interface routines are provided (TBD). The important thing to remember while
* manipulating the structures, is that, the NODE number information should
* be used. If the NODE is non-zero (remote) then each offset should
* be added to the REMOTE BASE ADDR else it should be added to the LOCAL BASE ADDR.
* This includes offsets for BOARDS, COMPONENTS and ERRORINFO.
*
* Note that these structures do not provide much info about connectivity.
* That info will be part of HWGRAPH, which is an extension of the cfg_t
* data structure. (ref IP27prom/cfg.h) It has to be extended to include
* the IO part of the Network(TBD).
*
* The data structures below define the above concepts.
*/
/*
* BOARD classes
*/
#define KLCLASS_MASK 0xf0
#define KLCLASS_NONE 0x00
#define KLCLASS_NODE 0x10
/* CPU, Memory and HUB board */
#define KLCLASS_CPU KLCLASS_NODE
#define KLCLASS_IO 0x20
/* BaseIO, 4 ch SCSI, ethernet, FDDI
and the non-graphics widget boards */
#define KLCLASS_ROUTER 0x30
/* Router board */
#define KLCLASS_MIDPLANE 0x40
/* We need to treat this as a board
so that we can record error info */
#define KLCLASS_IOBRICK 0x70
/* IP35 iobrick */
#define KLCLASS_MAX 8
/* Bump this if a new CLASS is added */
#define KLCLASS(_x) ((_x) & KLCLASS_MASK)
/*
* board types
*/
#define KLTYPE_MASK 0x0f
#define KLTYPE(_x) ((_x) & KLTYPE_MASK)
#define KLTYPE_SNIA (KLCLASS_CPU | 0x1)
#define KLTYPE_TIO (KLCLASS_CPU | 0x2)
#define KLTYPE_ROUTER (KLCLASS_ROUTER | 0x1)
#define KLTYPE_META_ROUTER (KLCLASS_ROUTER | 0x3)
#define KLTYPE_REPEATER_ROUTER (KLCLASS_ROUTER | 0x4)
#define KLTYPE_IOBRICK_XBOW (KLCLASS_MIDPLANE | 0x2)
#define KLTYPE_IOBRICK (KLCLASS_IOBRICK | 0x0)
#define KLTYPE_NBRICK (KLCLASS_IOBRICK | 0x4)
#define KLTYPE_PXBRICK (KLCLASS_IOBRICK | 0x6)
#define KLTYPE_IXBRICK (KLCLASS_IOBRICK | 0x7)
#define KLTYPE_CGBRICK (KLCLASS_IOBRICK | 0x8)
#define KLTYPE_OPUSBRICK (KLCLASS_IOBRICK | 0x9)
#define KLTYPE_SABRICK (KLCLASS_IOBRICK | 0xa)
#define KLTYPE_IABRICK (KLCLASS_IOBRICK | 0xb)
#define KLTYPE_PABRICK (KLCLASS_IOBRICK | 0xc)
#define KLTYPE_GABRICK (KLCLASS_IOBRICK | 0xd)
/*
* board structures
*/
#define MAX_COMPTS_PER_BRD 24
typedef struct lboard_s {
klconf_off_t brd_next_any; /* Next BOARD */
unsigned char struct_type; /* type of structure, local or remote */
unsigned char brd_type; /* type+class */
unsigned char brd_sversion; /* version of this structure */
unsigned char brd_brevision; /* board revision */
unsigned char brd_promver; /* board prom version, if any */
unsigned char brd_flags; /* Enabled, Disabled etc */
unsigned char brd_slot; /* slot number */
unsigned short brd_debugsw; /* Debug switches */
geoid_t brd_geoid; /* geo id */
partid_t brd_partition; /* Partition number */
unsigned short brd_diagval; /* diagnostic value */
unsigned short brd_diagparm; /* diagnostic parameter */
unsigned char brd_inventory; /* inventory history */
unsigned char brd_numcompts; /* Number of components */
nic_t brd_nic; /* Number in CAN */
nasid_t brd_nasid; /* passed parameter */
klconf_off_t brd_compts[MAX_COMPTS_PER_BRD]; /* pointers to COMPONENTS */
klconf_off_t brd_errinfo; /* Board's error information */
struct lboard_s *brd_parent; /* Logical parent for this brd */
char pad0[4];
unsigned char brd_confidence; /* confidence that the board is bad */
nasid_t brd_owner; /* who owns this board */
unsigned char brd_nic_flags; /* To handle 8 more NICs */
char pad1[24]; /* future expansion */
char brd_name[32];
nasid_t brd_next_same_host; /* host of next brd w/same nasid */
klconf_off_t brd_next_same; /* Next BOARD with same nasid */
} lboard_t;
/*
* Generic info structure. This stores common info about a
* component.
*/
typedef struct klinfo_s { /* Generic info */
unsigned char struct_type; /* type of this structure */
unsigned char struct_version; /* version of this structure */
unsigned char flags; /* Enabled, disabled etc */
unsigned char revision; /* component revision */
unsigned short diagval; /* result of diagnostics */
unsigned short diagparm; /* diagnostic parameter */
unsigned char inventory; /* previous inventory status */
unsigned short partid; /* widget part number */
nic_t nic; /* MUst be aligned properly */
unsigned char physid; /* physical id of component */
unsigned int virtid; /* virtual id as seen by system */
unsigned char widid; /* Widget id - if applicable */
nasid_t nasid; /* node number - from parent */
char pad1; /* pad out structure. */
char pad2; /* pad out structure. */
void *data;
klconf_off_t errinfo; /* component specific errors */
unsigned short pad3; /* pci fields have moved over to */
unsigned short pad4; /* klbri_t */
} klinfo_t ;
static inline lboard_t *find_lboard_next(lboard_t * brd)
{
if (brd && brd->brd_next_any)
return NODE_OFFSET_TO_LBOARD(NASID_GET(brd), brd->brd_next_any);
return NULL;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Patrick Gefre | 20 | 55.56% | 1 | 50.00% |
| Jack Steiner | 16 | 44.44% | 1 | 50.00% |
| Total | 36 | 100.00% | 2 | 100.00% |
#endif /* _ASM_IA64_SN_KLCONFIG_H */
Overall Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Patrick Gefre | 442 | 96.30% | 1 | 33.33% |
| Jack Steiner | 17 | 3.70% | 2 | 66.67% |
| Total | 459 | 100.00% | 3 | 100.00% |
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.