#ifndef _MAPPI3_PLD_H #define _MAPPI3_PLD_H /* * include/asm-m32r/mappi3/mappi3_pld.h * * Definitions for Extended IO Logic on MAPPI3 board. * based on m32700ut_pld.h * * This file is subject to the terms and conditions of the GNU General * Public License. See the file "COPYING" in the main directory of * this archive for more details. */ #ifndef __ASSEMBLY__ /* FIXME: * Some C functions use non-cache address, so can't define non-cache address. */ #define PLD_BASE (0x1c000000 /* + NONCACHE_OFFSET */) #define __reg8 (volatile unsigned char *) #define __reg16 (volatile unsigned short *) #define __reg32 (volatile unsigned int *) #else #define PLD_BASE (0x1c000000 + NONCACHE_OFFSET) #define __reg8 #define __reg16 #define __reg32 #endif /* __ASSEMBLY__ */ /* CFC */ #define PLD_CFRSTCR __reg16(PLD_BASE + 0x0000) #define PLD_CFSTS __reg16(PLD_BASE + 0x0002) #define PLD_CFIMASK __reg16(PLD_BASE + 0x0004) #define PLD_CFBUFCR __reg16(PLD_BASE + 0x0006) #define PLD_CFCR0 __reg16(PLD_BASE + 0x000a) #define PLD_CFCR1 __reg16(PLD_BASE + 0x000c) /* MMC */ #define PLD_MMCCR __reg16(PLD_BASE + 0x4000) #define PLD_MMCMOD __reg16(PLD_BASE + 0x4002) #define PLD_MMCSTS __reg16(PLD_BASE + 0x4006) #define PLD_MMCBAUR __reg16(PLD_BASE + 0x400a) #define PLD_MMCCMDBCUT __reg16(PLD_BASE + 0x400c) #define PLD_MMCCDTBCUT __reg16(PLD_BASE + 0x400e) #define PLD_MMCDET __reg16(PLD_BASE + 0x4010) #define PLD_MMCWP __reg16(PLD_BASE + 0x4012) #define PLD_MMCWDATA __reg16(PLD_BASE + 0x5000) #define PLD_MMCRDATA __reg16(PLD_BASE + 0x6000) #define PLD_MMCCMDDATA __reg16(PLD_BASE + 0x7000) #define PLD_MMCRSPDATA __reg16(PLD_BASE + 0x7006) /* Power Control of MMC and CF */ #define PLD_CPCR __reg16(PLD_BASE + 0x14000) /* ICU */ #define M32R_IRQ_PC104 (5) /* INT4(PC/104) */ #define M32R_IRQ_I2C (28) /* I2C-BUS */ #define PLD_IRQ_CFIREQ (6) /* INT5 CFC Card Interrupt */ #define PLD_IRQ_CFC_INSERT (7) /* INT6 CFC Card Insert & Eject */ #define PLD_IRQ_IDEIREQ (8) /* INT7 IDE Interrupt */ #define PLD_IRQ_MMCCARD (43) /* MMC Card Insert */ #define PLD_IRQ_MMCIRQ (44) /* MMC Transfer Done */ #if 0 /* LED Control * * 1: DIP swich side * 2: Reset switch side */ #define PLD_IOLEDCR __reg16(PLD_BASE + 0x14002) #define PLD_IOLED_1_ON 0x001 #define PLD_IOLED_1_OFF 0x000 #define PLD_IOLED_2_ON 0x002 #define PLD_IOLED_2_OFF 0x000 /* DIP Switch * 0: Write-protect of Flash Memory (0:protected, 1:non-protected) * 1: - * 2: - * 3: - */ #define PLD_IOSWSTS __reg16(PLD_BASE + 0x14004) #define PLD_IOSWSTS_IOSW2 0x0200 #define PLD_IOSWSTS_IOSW1 0x0100 #define PLD_IOSWSTS_IOWP0 0x0001 #endif /* CRC */ #define PLD_CRC7DATA __reg16(PLD_BASE + 0x18000) #define PLD_CRC7INDATA __reg16(PLD_BASE + 0x18002) #define PLD_CRC16DATA __reg16(PLD_BASE + 0x18004) #define PLD_CRC16INDATA __reg16(PLD_BASE + 0x18006) #define PLD_CRC16ADATA __reg16(PLD_BASE + 0x18008) #define PLD_CRC16AINDATA __reg16(PLD_BASE + 0x1800a) #if 0 /* RTC */ #define PLD_RTCCR __reg16(PLD_BASE + 0x1c000) #define PLD_RTCBAUR __reg16(PLD_BASE + 0x1c002) #define PLD_RTCWRDATA __reg16(PLD_BASE + 0x1c004) #define PLD_RTCRDDATA __reg16(PLD_BASE + 0x1c006) #define PLD_RTCRSTODT __reg16(PLD_BASE + 0x1c008) /* SIO0 */ #define PLD_ESIO0CR __reg16(PLD_BASE + 0x20000) #define PLD_ESIO0CR_TXEN 0x0001 #define PLD_ESIO0CR_RXEN 0x0002 #define PLD_ESIO0MOD0 __reg16(PLD_BASE + 0x20002) #define PLD_ESIO0MOD0_CTSS 0x0040 #define PLD_ESIO0MOD0_RTSS 0x0080 #define PLD_ESIO0MOD1 __reg16(PLD_BASE + 0x20004) #define PLD_ESIO0MOD1_LMFS 0x0010 #define PLD_ESIO0STS __reg16(PLD_BASE + 0x20006) #define PLD_ESIO0STS_TEMP 0x0001 #define PLD_ESIO0STS_TXCP 0x0002 #define PLD_ESIO0STS_RXCP 0x0004 #define PLD_ESIO0STS_TXSC 0x0100 #define PLD_ESIO0STS_RXSC 0x0200 #define PLD_ESIO0STS_TXREADY (PLD_ESIO0STS_TXCP | PLD_ESIO0STS_TEMP) #define PLD_ESIO0INTCR __reg16(PLD_BASE + 0x20008) #define PLD_ESIO0INTCR_TXIEN 0x0002 #define PLD_ESIO0INTCR_RXCEN 0x0004 #define PLD_ESIO0BAUR __reg16(PLD_BASE + 0x2000a) #define PLD_ESIO0TXB __reg16(PLD_BASE + 0x2000c) #define PLD_ESIO0RXB __reg16(PLD_BASE + 0x2000e) /* SIM Card */ #define PLD_SCCR __reg16(PLD_BASE + 0x38000) #define PLD_SCMOD __reg16(PLD_BASE + 0x38004) #define PLD_SCSTS __reg16(PLD_BASE + 0x38006) #define PLD_SCINTCR __reg16(PLD_BASE + 0x38008) #define PLD_SCBAUR __reg16(PLD_BASE + 0x3800a) #define PLD_SCTXB __reg16(PLD_BASE + 0x3800c) #define PLD_SCRXB __reg16(PLD_BASE + 0x3800e) #endif /* Reset Control */ #define PLD_REBOOT __reg16(PLD_BASE + 0x38000) #endif /* _MAPPI3_PLD.H */Overall Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Hirokazu Takata | 378 | 100.00% | 4 | 100.00% |
| Total | 378 | 100.00% | 4 | 100.00% |