/* SPDX-License-Identifier: GPL-2.0 */ /****************************************************************************/ /* * m52xxacr.h -- ColdFire version 2 core cache support * * (C) Copyright 2010, Greg Ungerer <gerg@snapgear.com> */ /****************************************************************************/ #ifndef m52xxacr_h #define m52xxacr_h /****************************************************************************/ /* * All varients of the ColdFire using version 2 cores have a similar * cache setup. Although not absolutely identical the cache register * definitions are compatible for all of them. Mostly they support a * configurable cache memory that can be instruction only, data only, * or split instruction and data. The exception is the very old version 2 * core based parts, like the 5206(e), 5249 and 5272, which are instruction * cache only. Cache size varies from 2k up to 16k. */ /* * Define the Cache Control register flags. */ #define CACR_CENB 0x80000000 /* Enable cache */ #define CACR_CDPI 0x10000000 /* Disable invalidation by CPUSHL */ #define CACR_CFRZ 0x08000000 /* Cache freeze mode */ #define CACR_CINV 0x01000000 /* Invalidate cache */ #define CACR_DISI 0x00800000 /* Disable instruction cache */ #define CACR_DISD 0x00400000 /* Disable data cache */ #define CACR_INVI 0x00200000 /* Invalidate instruction cache */ #define CACR_INVD 0x00100000 /* Invalidate data cache */ #define CACR_CEIB 0x00000400 /* Non-cachable instruction burst */ #define CACR_DCM 0x00000200 /* Default cache mode */ #define CACR_DBWE 0x00000100 /* Buffered write enable */ #define CACR_DWP 0x00000020 /* Write protection */ #define CACR_EUSP 0x00000010 /* Enable separate user a7 */ /* * Define the Access Control register flags. */ #define ACR_BASE_POS 24 /* Address Base (upper 8 bits) */ #define ACR_MASK_POS 16 /* Address Mask (next 8 bits) */ #define ACR_ENABLE 0x00008000 /* Enable this ACR */ #define ACR_USER 0x00000000 /* Allow only user accesses */ #define ACR_SUPER 0x00002000 /* Allow supervisor access only */ #define ACR_ANY 0x00004000 /* Allow any access type */ #define ACR_CENB 0x00000000 /* Caching of region enabled */ #define ACR_CDIS 0x00000040 /* Caching of region disabled */ #define ACR_BWE 0x00000020 /* Write buffer enabled */ #define ACR_WPROTECT 0x00000004 /* Write protect region */ /* * Set the cache controller settings we will use. On the cores that support * a split cache configuration we allow all the combinations at Kconfig * time. For those cores that only have an instruction cache we just set * that as on. */ #if defined(CONFIG_CACHE_I) #define CACHE_TYPE (CACR_DISD + CACR_EUSP) #define CACHE_INVTYPEI 0 #elif defined(CONFIG_CACHE_D) #define CACHE_TYPE (CACR_DISI + CACR_EUSP) #define CACHE_INVTYPED 0 #elif defined(CONFIG_CACHE_BOTH) #define CACHE_TYPE CACR_EUSP #define CACHE_INVTYPEI CACR_INVI #define CACHE_INVTYPED CACR_INVD #else /* This is the instruction cache only devices (no split cache, no eusp) */ #define CACHE_TYPE 0 #define CACHE_INVTYPEI 0 #endif #define CACHE_INIT (CACR_CINV + CACHE_TYPE) #define CACHE_MODE (CACR_CENB + CACHE_TYPE + CACR_DCM) #define CACHE_INVALIDATE (CACHE_MODE + CACR_CINV) #if defined(CACHE_INVTYPEI) #define CACHE_INVALIDATEI (CACHE_MODE + CACR_CINV + CACHE_INVTYPEI) #endif #if defined(CACHE_INVTYPED) #define CACHE_INVALIDATED (CACHE_MODE + CACR_CINV + CACHE_INVTYPED) #endif #define ACR0_MODE ((CONFIG_RAMBASE & 0xff000000) + \ (0x000f0000) + \ (ACR_ENABLE + ACR_ANY + ACR_CENB + ACR_BWE)) #define ACR1_MODE 0 /****************************************************************************/ #endif /* m52xxsim_h */Overall Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Greg Ungerer | 236 | 99.58% | 4 | 80.00% |
| Greg Kroah-Hartman | 1 | 0.42% | 1 | 20.00% |
| Total | 237 | 100.00% | 5 | 100.00% |