Release 4.14 arch/m68k/kernel/setup_no.c
// SPDX-License-Identifier: GPL-2.0
/*
* linux/arch/m68knommu/kernel/setup.c
*
* Copyright (C) 1999-2007 Greg Ungerer (gerg@snapgear.com)
* Copyright (C) 1998,1999 D. Jeff Dionne <jeff@uClinux.org>
* Copyleft ()) 2000 James D. Schettine {james@telos-systems.com}
* Copyright (C) 1998 Kenneth Albanowski <kjahds@kjahds.com>
* Copyright (C) 1995 Hamish Macdonald
* Copyright (C) 2000 Lineo Inc. (www.lineo.com)
* Copyright (C) 2001 Lineo, Inc. <www.lineo.com>
*
* 68VZ328 Fixes/support Evan Stawnyczy <e@lineo.ca>
*/
/*
* This file handles the architecture-dependent parts of system setup
*/
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/fb.h>
#include <linux/module.h>
#include <linux/mm.h>
#include <linux/console.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/bootmem.h>
#include <linux/seq_file.h>
#include <linux/init.h>
#include <linux/initrd.h>
#include <linux/root_dev.h>
#include <linux/rtc.h>
#include <asm/setup.h>
#include <asm/bootinfo.h>
#include <asm/irq.h>
#include <asm/machdep.h>
#include <asm/pgtable.h>
#include <asm/sections.h>
unsigned long memory_start;
unsigned long memory_end;
EXPORT_SYMBOL(memory_start);
EXPORT_SYMBOL(memory_end);
char __initdata command_line[COMMAND_LINE_SIZE];
/* machine dependent timer functions */
void (*mach_sched_init)(irq_handler_t handler) __initdata = NULL;
int (*mach_set_clock_mmss)(unsigned long);
int (*mach_hwclk) (int, struct rtc_time*);
/* machine dependent reboot functions */
void (*mach_reset)(void);
void (*mach_halt)(void);
void (*mach_power_off)(void);
#ifdef CONFIG_M68000
#if defined(CONFIG_M68328)
#define CPU_NAME "MC68328"
#elif defined(CONFIG_M68EZ328)
#define CPU_NAME "MC68EZ328"
#elif defined(CONFIG_M68VZ328)
#define CPU_NAME "MC68VZ328"
#else
#define CPU_NAME "MC68000"
#endif
#endif /* CONFIG_M68000 */
#ifndef CPU_NAME
#define CPU_NAME "UNKNOWN"
#endif
/*
* Different cores have different instruction execution timings.
* The old/traditional 68000 cores are basically all the same, at 16.
* The ColdFire cores vary a little, their values are defined in their
* headers. We default to the standard 68000 value here.
*/
#ifndef CPU_INSTR_PER_JIFFY
#define CPU_INSTR_PER_JIFFY 16
#endif
void __init setup_arch(char **cmdline_p)
{
int bootmap_size;
memory_start = PAGE_ALIGN(_ramstart);
memory_end = _ramend;
init_mm.start_code = (unsigned long) &_stext;
init_mm.end_code = (unsigned long) &_etext;
init_mm.end_data = (unsigned long) &_edata;
init_mm.brk = (unsigned long) 0;
config_BSP(&command_line[0], sizeof(command_line));
#if defined(CONFIG_BOOTPARAM)
strncpy(&command_line[0], CONFIG_BOOTPARAM_STRING, sizeof(command_line));
command_line[sizeof(command_line) - 1] = 0;
#endif /* CONFIG_BOOTPARAM */
process_uboot_commandline(&command_line[0], sizeof(command_line));
pr_info("uClinux with CPU " CPU_NAME "\n");
#ifdef CONFIG_UCDIMM
pr_info("uCdimm by Lineo, Inc. <www.lineo.com>\n");
#endif
#ifdef CONFIG_M68VZ328
pr_info("M68VZ328 support by Evan Stawnyczy <e@lineo.ca>\n");
#endif
#ifdef CONFIG_COLDFIRE
pr_info("COLDFIRE port done by Greg Ungerer, gerg@snapgear.com\n");
#ifdef CONFIG_M5307
pr_info("Modified for M5307 by Dave Miller, dmiller@intellistor.com\n");
#endif
#ifdef CONFIG_ELITE
pr_info("Modified for M5206eLITE by Rob Scott, rscott@mtrob.fdns.net\n");
#endif
#endif
pr_info("Flat model support (C) 1998,1999 Kenneth Albanowski, D. Jeff Dionne\n");
#if defined( CONFIG_PILOT ) && defined( CONFIG_M68328 )
pr_info("TRG SuperPilot FLASH card support <info@trgnet.com>\n");
#endif
#if defined( CONFIG_PILOT ) && defined( CONFIG_M68EZ328 )
pr_info("PalmV support by Lineo Inc. <jeff@uclinux.com>\n");
#endif
#ifdef CONFIG_DRAGEN2
pr_info("DragonEngine II board support by Georges Menie\n");
#endif
#ifdef CONFIG_M5235EVB
pr_info("Motorola M5235EVB support (C)2005 Syn-tech Systems, Inc. (Jate Sujjavanich)\n");
#endif
pr_debug("KERNEL -> TEXT=0x%p-0x%p DATA=0x%p-0x%p BSS=0x%p-0x%p\n",
_stext, _etext, _sdata, _edata, __bss_start, __bss_stop);
pr_debug("MEMORY -> ROMFS=0x%p-0x%06lx MEM=0x%06lx-0x%06lx\n ",
__bss_stop, memory_start, memory_start, memory_end);
/* Keep a copy of command line */
*cmdline_p = &command_line[0];
memcpy(boot_command_line, command_line, COMMAND_LINE_SIZE);
boot_command_line[COMMAND_LINE_SIZE-1] = 0;
#if defined(CONFIG_FRAMEBUFFER_CONSOLE) && defined(CONFIG_DUMMY_CONSOLE)
conswitchp = &dummy_con;
#endif
/*
* Give all the memory to the bootmap allocator, tell it to put the
* boot mem_map at the start of memory.
*/
min_low_pfn = PFN_DOWN(memory_start);
max_pfn = max_low_pfn = PFN_DOWN(memory_end);
bootmap_size = init_bootmem_node(
NODE_DATA(0),
min_low_pfn, /* map goes here */
PFN_DOWN(PAGE_OFFSET),
max_pfn);
/*
* Free the usable memory, we have to make sure we do not free
* the bootmem bitmap so we then reserve it after freeing it :-)
*/
free_bootmem(memory_start, memory_end - memory_start);
reserve_bootmem(memory_start, bootmap_size, BOOTMEM_DEFAULT);
#if defined(CONFIG_UBOOT) && defined(CONFIG_BLK_DEV_INITRD)
if ((initrd_start > 0) && (initrd_start < initrd_end) &&
(initrd_end < memory_end))
reserve_bootmem(initrd_start, initrd_end - initrd_start,
BOOTMEM_DEFAULT);
#endif /* if defined(CONFIG_BLK_DEV_INITRD) */
/*
* Get kmalloc into gear.
*/
paging_init();
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Alan Cox | 266 | 61.57% | 1 | 5.26% |
| Greg Ungerer | 60 | 13.89% | 8 | 42.11% |
| Lennart Sorensen | 59 | 13.66% | 1 | 5.26% |
| Geert Uytterhoeven | 26 | 6.02% | 3 | 15.79% |
| Andrew Morton | 12 | 2.78% | 1 | 5.26% |
| Bernhard Walle | 2 | 0.46% | 1 | 5.26% |
| Russell King | 2 | 0.46% | 1 | 5.26% |
| Alon Bar-Lev | 2 | 0.46% | 1 | 5.26% |
| Joe Perches | 2 | 0.46% | 1 | 5.26% |
| Sebastian Andrzej Siewior | 1 | 0.23% | 1 | 5.26% |
| Total | 432 | 100.00% | 19 | 100.00% |
/*
* Get CPU information for use by the procfs.
*/
static int show_cpuinfo(struct seq_file *m, void *v)
{
char *cpu, *mmu, *fpu;
u_long clockfreq;
cpu = CPU_NAME;
mmu = "none";
fpu = "none";
clockfreq = (loops_per_jiffy * HZ) * CPU_INSTR_PER_JIFFY;
seq_printf(m, "CPU:\t\t%s\n"
"MMU:\t\t%s\n"
"FPU:\t\t%s\n"
"Clocking:\t%lu.%1luMHz\n"
"BogoMips:\t%lu.%02lu\n"
"Calibration:\t%lu loops\n",
cpu, mmu, fpu,
clockfreq / 1000000,
(clockfreq / 100000) % 10,
(loops_per_jiffy * HZ) / 500000,
((loops_per_jiffy * HZ) / 5000) % 100,
(loops_per_jiffy * HZ));
return 0;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Alan Cox | 107 | 98.17% | 1 | 33.33% |
| Greg Ungerer | 2 | 1.83% | 2 | 66.67% |
| Total | 109 | 100.00% | 3 | 100.00% |
static void *c_start(struct seq_file *m, loff_t *pos)
{
return *pos < NR_CPUS ? ((void *) 0x12345678) : NULL;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Alan Cox | 32 | 100.00% | 1 | 100.00% |
| Total | 32 | 100.00% | 1 | 100.00% |
static void *c_next(struct seq_file *m, void *v, loff_t *pos)
{
++*pos;
return c_start(m, pos);
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Alan Cox | 32 | 100.00% | 1 | 100.00% |
| Total | 32 | 100.00% | 1 | 100.00% |
static void c_stop(struct seq_file *m, void *v)
{
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Alan Cox | 14 | 100.00% | 1 | 100.00% |
| Total | 14 | 100.00% | 1 | 100.00% |
const struct seq_operations cpuinfo_op = {
.start = c_start,
.next = c_next,
.stop = c_stop,
.show = show_cpuinfo,
};
Overall Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Alan Cox | 578 | 66.59% | 1 | 3.12% |
| Greg Ungerer | 137 | 15.78% | 15 | 46.88% |
| Lennart Sorensen | 65 | 7.49% | 1 | 3.12% |
| Daniel Palmer | 27 | 3.11% | 1 | 3.12% |
| Geert Uytterhoeven | 26 | 3.00% | 3 | 9.38% |
| Andrew Morton | 16 | 1.84% | 2 | 6.25% |
| Luis Alves | 4 | 0.46% | 1 | 3.12% |
| Andrea Righi | 3 | 0.35% | 1 | 3.12% |
| Alon Bar-Lev | 3 | 0.35% | 1 | 3.12% |
| Bernhard Walle | 2 | 0.23% | 1 | 3.12% |
| Russell King | 2 | 0.23% | 1 | 3.12% |
| Joe Perches | 2 | 0.23% | 1 | 3.12% |
| Greg Kroah-Hartman | 1 | 0.12% | 1 | 3.12% |
| Jan Engelhardt | 1 | 0.12% | 1 | 3.12% |
| Sebastian Andrzej Siewior | 1 | 0.12% | 1 | 3.12% |
| Total | 868 | 100.00% | 32 | 100.00% |
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.