cregit-Linux how code gets into the kernel

Release 4.14 arch/mips/jazz/setup.c

Directory: arch/mips/jazz
/*
 * Setup pointers to hardware-dependent routines.
 *
 * This file is subject to the terms and conditions of the GNU General Public
 * License.  See the file "COPYING" in the main directory of this archive
 * for more details.
 *
 * Copyright (C) 1996, 1997, 1998, 2001, 07, 08 by Ralf Baechle
 * Copyright (C) 2001 MIPS Technologies, Inc.
 * Copyright (C) 2007 by Thomas Bogendoerfer
 */
#include <linux/eisa.h>
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/console.h>
#include <linux/screen_info.h>
#include <linux/platform_device.h>
#include <linux/serial_8250.h>

#include <asm/jazz.h>
#include <asm/jazzdma.h>
#include <asm/reboot.h>
#include <asm/pgtable.h>
#include <asm/tlbmisc.h>

extern asmlinkage void jazz_handle_int(void);

extern void jazz_machine_restart(char *command);


static struct resource jazz_io_resources[] = {
	{
		.start	= 0x00,
		.end	= 0x1f,
		.name	= "dma1",
		.flags	= IORESOURCE_BUSY
	}, {
		.start	= 0x40,
		.end	= 0x5f,
		.name	= "timer",
		.flags	= IORESOURCE_BUSY
	}, {
		.start	= 0x80,
		.end	= 0x8f,
		.name	= "dma page reg",
		.flags	= IORESOURCE_BUSY
	}, {
		.start	= 0xc0,
		.end	= 0xdf,
		.name	= "dma2",
		.flags	= IORESOURCE_BUSY
	}
};


void __init plat_mem_setup(void) { int i; /* Map 0xe0000000 -> 0x0:800005C0, 0xe0010000 -> 0x1:30000580 */ add_wired_entry(0x02000017, 0x03c00017, 0xe0000000, PM_64K); /* Map 0xe2000000 -> 0x0:900005C0, 0xe3010000 -> 0x0:910005C0 */ add_wired_entry(0x02400017, 0x02440017, 0xe2000000, PM_16M); /* Map 0xe4000000 -> 0x0:600005C0, 0xe4100000 -> 400005C0 */ add_wired_entry(0x01800017, 0x01000017, 0xe4000000, PM_4M); set_io_port_base(JAZZ_PORT_BASE); #ifdef CONFIG_EISA EISA_bus = 1; #endif /* request I/O space for devices used on all i[345]86 PCs */ for (i = 0; i < ARRAY_SIZE(jazz_io_resources); i++) request_resource(&ioport_resource, jazz_io_resources + i); /* The RTC is outside the port address space */ _machine_restart = jazz_machine_restart; #ifdef CONFIG_VT screen_info = (struct screen_info) { .orig_video_cols = 160, .orig_video_lines = 64, .orig_video_points = 16, }; #endif add_preferred_console("ttyS", 0, "9600"); }

Contributors

PersonTokensPropCommitsCommitProp
Linus Torvalds (pre-git)6751.54%650.00%
Andrew Morton2418.46%18.33%
Thomas Bogendoerfer1310.00%18.33%
Ralf Bächle129.23%216.67%
Sebastian Andrzej Siewior107.69%18.33%
Linus Torvalds43.08%18.33%
Total130100.00%12100.00%

#ifdef CONFIG_OLIVETTI_M700 #define UART_CLK 1843200 #else /* Some Jazz machines seem to have an 8MHz crystal clock but I don't know exactly which ones ... XXX */ #define UART_CLK (8000000 / 16) /* ( 3072000 / 16) */ #endif #define MEMPORT(_base, _irq) \ { \ .mapbase = (_base), \ .membase = (void *)(_base), \ .irq = (_irq), \ .uartclk = UART_CLK, \ .iotype = UPIO_MEM, \ .flags = UPF_BOOT_AUTOCONF, \ } static struct plat_serial8250_port jazz_serial_data[] = { MEMPORT(JAZZ_SERIAL1_BASE, JAZZ_SERIAL1_IRQ), MEMPORT(JAZZ_SERIAL2_BASE, JAZZ_SERIAL2_IRQ), { }, }; static struct platform_device jazz_serial8250_device = { .name = "serial8250", .id = PLAT8250_DEV_PLATFORM, .dev = { .platform_data = jazz_serial_data, }, }; static struct resource jazz_esp_rsrc[] = { { .start = JAZZ_SCSI_BASE, .end = JAZZ_SCSI_BASE + 31, .flags = IORESOURCE_MEM }, { .start = JAZZ_SCSI_DMA, .end = JAZZ_SCSI_DMA, .flags = IORESOURCE_MEM }, { .start = JAZZ_SCSI_IRQ, .end = JAZZ_SCSI_IRQ, .flags = IORESOURCE_IRQ } }; static struct platform_device jazz_esp_pdev = { .name = "jazz_esp", .num_resources = ARRAY_SIZE(jazz_esp_rsrc), .resource = jazz_esp_rsrc }; static struct resource jazz_sonic_rsrc[] = { { .start = JAZZ_ETHERNET_BASE, .end = JAZZ_ETHERNET_BASE + 0xff, .flags = IORESOURCE_MEM }, { .start = JAZZ_ETHERNET_IRQ, .end = JAZZ_ETHERNET_IRQ, .flags = IORESOURCE_IRQ } }; static struct platform_device jazz_sonic_pdev = { .name = "jazzsonic", .num_resources = ARRAY_SIZE(jazz_sonic_rsrc), .resource = jazz_sonic_rsrc }; static struct resource jazz_cmos_rsrc[] = { { .start = 0x70, .end = 0x71, .flags = IORESOURCE_IO }, { .start = 8, .end = 8, .flags = IORESOURCE_IRQ } }; static struct platform_device jazz_cmos_pdev = { .name = "rtc_cmos", .num_resources = ARRAY_SIZE(jazz_cmos_rsrc), .resource = jazz_cmos_rsrc }; static struct platform_device pcspeaker_pdev = { .name = "pcspkr", .id = -1, };
static int __init jazz_setup_devinit(void) { platform_device_register(&jazz_serial8250_device); platform_device_register(&jazz_esp_pdev); platform_device_register(&jazz_sonic_pdev); platform_device_register(&jazz_cmos_pdev); platform_device_register(&pcspeaker_pdev); return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Thomas Bogendoerfer3685.71%150.00%
Ralf Bächle614.29%150.00%
Total42100.00%2100.00%

device_initcall(jazz_setup_devinit);

Overall Contributors

PersonTokensPropCommitsCommitProp
Thomas Bogendoerfer36055.81%14.76%
Linus Torvalds (pre-git)10816.74%838.10%
Ralf Bächle9915.35%733.33%
Andrew Morton609.30%14.76%
Sebastian Andrzej Siewior101.55%14.76%
Linus Torvalds40.62%14.76%
Matthew Wilcox30.47%14.76%
Alexey Dobriyan10.16%14.76%
Total645100.00%21100.00%
Directory: arch/mips/jazz
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with cregit.