cregit-Linux how code gets into the kernel

Release 4.14 arch/mips/mti-malta/malta-pm.c

/*
 * Copyright (C) 2014 Imagination Technologies
 * Author: Paul Burton <paul.burton@mips.com>
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of the GNU General Public License as published by the
 * Free Software Foundation;  either version 2 of the  License, or (at your
 * option) any later version.
 */

#include <linux/delay.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/pci.h>

#include <asm/mach-malta/malta-pm.h>


static struct pci_bus *pm_pci_bus;

static resource_size_t pm_io_offset;


int mips_pm_suspend(unsigned state) { int spec_devid; u16 sts; if (!pm_pci_bus || !pm_io_offset) return -ENODEV; /* Ensure the power button status is clear */ while (1) { sts = inw(pm_io_offset + PIIX4_FUNC3IO_PMSTS); if (!(sts & PIIX4_FUNC3IO_PMSTS_PWRBTN_STS)) break; outw(sts, pm_io_offset + PIIX4_FUNC3IO_PMSTS); } /* Enable entry to suspend */ outw(state | PIIX4_FUNC3IO_PMCNTRL_SUS_EN, pm_io_offset + PIIX4_FUNC3IO_PMCNTRL); /* If the special cycle occurs too soon this doesn't work... */ mdelay(10); /* * The PIIX4 will enter the suspend state only after seeing a special * cycle with the correct magic data on the PCI bus. Generate that * cycle now. */ spec_devid = PCI_DEVID(0, PCI_DEVFN(0x1f, 0x7)); pci_bus_write_config_dword(pm_pci_bus, spec_devid, 0, PIIX4_SUSPEND_MAGIC); /* Give the system some time to power down */ mdelay(1000); return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Paul Burton114100.00%1100.00%
Total114100.00%1100.00%


static int __init malta_pm_setup(void) { struct pci_dev *dev; int res, io_region = PCI_BRIDGE_RESOURCES; /* Find a reference to the PCI bus */ pm_pci_bus = pci_find_next_bus(NULL); if (!pm_pci_bus) { pr_warn("malta-pm: failed to find reference to PCI bus\n"); return -ENODEV; } /* Find the PIIX4 PM device */ dev = pci_get_subsys(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_3, PCI_ANY_ID, PCI_ANY_ID, NULL); if (!dev) { pr_warn("malta-pm: failed to find PIIX4 PM\n"); return -ENODEV; } /* Request access to the PIIX4 PM IO registers */ res = pci_request_region(dev, io_region, "PIIX4 PM IO registers"); if (res) { pr_warn("malta-pm: failed to request PM IO registers (%d)\n", res); pci_dev_put(dev); return -ENODEV; } /* Find the offset to the PIIX4 PM IO registers */ pm_io_offset = pci_resource_start(dev, io_region); pci_dev_put(dev); return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Paul Burton129100.00%1100.00%
Total129100.00%1100.00%

late_initcall(malta_pm_setup);

Overall Contributors

PersonTokensPropCommitsCommitProp
Paul Burton274100.00%2100.00%
Total274100.00%2100.00%
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with cregit.