Release 4.14 arch/mips/netlogic/xlp/ahci-init.c

/*
 * Copyright (c) 2003-2014 Broadcom Corporation
 * All Rights Reserved
 *
 * This software is available to you under a choice of one of two
 * licenses.  You may choose to be licensed under the terms of the GNU
 * General Public License (GPL) Version 2, available from the file
 * COPYING in the main directory of this source tree, or the Broadcom
 * license below:
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the
 *    distribution.
 *
 * THIS SOFTWARE IS PROVIDED BY BROADCOM ``AS IS'' AND ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
 * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
 * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
 * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
 * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

#include <linux/dma-mapping.h>
#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/irq.h>
#include <linux/bitops.h>

#include <asm/cpu.h>
#include <asm/mipsregs.h>

#include <asm/netlogic/haldefs.h>
#include <asm/netlogic/xlp-hal/xlp.h>
#include <asm/netlogic/common.h>
#include <asm/netlogic/xlp-hal/iomap.h>
#include <asm/netlogic/mips-extns.h>


#define SATA_CTL		0x0

#define SATA_STATUS		0x1	
/* Status Reg */

#define SATA_INT		0x2	
/* Interrupt Reg */

#define SATA_INT_MASK		0x3	
/* Interrupt Mask Reg */

#define SATA_CR_REG_TIMER	0x4	
/* PHY Conrol Timer Reg */

#define SATA_CORE_ID		0x5	
/* Core ID Reg */

#define SATA_AXI_SLAVE_OPT1	0x6	
/* AXI Slave Options Reg */

#define SATA_PHY_LOS_LEV	0x7	
/* PHY LOS Level Reg */

#define SATA_PHY_MULTI		0x8	
/* PHY Multiplier Reg */

#define SATA_PHY_CLK_SEL	0x9	
/* Clock Select Reg */

#define SATA_PHY_AMP1_GEN1	0xa	
/* PHY Transmit Amplitude Reg 1 */

#define SATA_PHY_AMP1_GEN2	0xb	
/* PHY Transmit Amplitude Reg 2 */

#define SATA_PHY_AMP1_GEN3	0xc	
/* PHY Transmit Amplitude Reg 3 */

#define SATA_PHY_PRE1		0xd	
/* PHY Transmit Preemphasis Reg 1 */

#define SATA_PHY_PRE2		0xe	
/* PHY Transmit Preemphasis Reg 2 */

#define SATA_PHY_PRE3		0xf	
/* PHY Transmit Preemphasis Reg 3 */

#define SATA_SPDMODE		0x10	
/* Speed Mode Reg */

#define SATA_REFCLK		0x11	
/* Reference Clock Control Reg */

#define SATA_BYTE_SWAP_DIS	0x12	
/* byte swap disable */

/*SATA_CTL Bits */

#define SATA_RST_N		BIT(0)

#define PHY0_RESET_N		BIT(16)

#define PHY1_RESET_N		BIT(17)

#define PHY2_RESET_N		BIT(18)

#define PHY3_RESET_N		BIT(19)

#define M_CSYSREQ		BIT(2)

#define S_CSYSREQ		BIT(3)

/*SATA_STATUS Bits */

#define P0_PHY_READY		BIT(4)

#define P1_PHY_READY		BIT(5)

#define P2_PHY_READY		BIT(6)

#define P3_PHY_READY		BIT(7)


#define nlm_read_sata_reg(b, r)		nlm_read_reg(b, r)

#define nlm_write_sata_reg(b, r, v)	nlm_write_reg(b, r, v)

#define nlm_get_sata_pcibase(node)	\
		nlm_pcicfg_base(XLP_IO_SATA_OFFSET(node))
/* SATA device specific configuration registers are starts at 0x900 offset */

#define nlm_get_sata_regbase(node)	\
		(nlm_get_sata_pcibase(node) + 0x900)



static void sata_clear_glue_reg(uint64_t regbase, uint32_t off, uint32_t bit)
{
	uint32_t reg_val;

	reg_val = nlm_read_sata_reg(regbase, off);
	nlm_write_sata_reg(regbase, off, (reg_val & ~bit));
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
Ganesan Ramalingam
41
100.00%
1
100.00%
Total
41
100.00%
1
100.00%



static void sata_set_glue_reg(uint64_t regbase, uint32_t off, uint32_t bit)
{
	uint32_t reg_val;

	reg_val = nlm_read_sata_reg(regbase, off);
	nlm_write_sata_reg(regbase, off, (reg_val | bit));
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
Ganesan Ramalingam
40
100.00%
1
100.00%
Total
40
100.00%
1
100.00%



static void nlm_sata_firmware_init(int node)
{
	uint32_t reg_val;
	uint64_t regbase;
	int i;

	pr_info("XLP AHCI Initialization started.\n");
	regbase = nlm_get_sata_regbase(node);

	/* Reset SATA */
	sata_clear_glue_reg(regbase, SATA_CTL, SATA_RST_N);
	/* Reset PHY */
	sata_clear_glue_reg(regbase, SATA_CTL,
			(PHY3_RESET_N | PHY2_RESET_N
			 | PHY1_RESET_N | PHY0_RESET_N));

	/* Set SATA */
	sata_set_glue_reg(regbase, SATA_CTL, SATA_RST_N);
	/* Set PHY */
	sata_set_glue_reg(regbase, SATA_CTL,
			(PHY3_RESET_N | PHY2_RESET_N
			 | PHY1_RESET_N | PHY0_RESET_N));

	pr_debug("Waiting for PHYs to come up.\n");
	i = 0;
	do {
		reg_val = nlm_read_sata_reg(regbase, SATA_STATUS);
		i++;
	} while (((reg_val & 0xF0) != 0xF0) && (i < 10000));

	for (i = 0; i < 4; i++) {
		if (reg_val  & (P0_PHY_READY << i))
			pr_info("PHY%d is up.\n", i);
		else
			pr_info("PHY%d is down.\n", i);
	}

	pr_info("XLP AHCI init done.\n");
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
Ganesan Ramalingam
174
100.00%
1
100.00%
Total
174
100.00%
1
100.00%



static int __init nlm_ahci_init(void)
{
	int node = 0;
	int chip = read_c0_prid() & PRID_IMP_MASK;

	if (chip == PRID_IMP_NETLOGIC_XLP3XX)
		nlm_sata_firmware_init(node);
	return 0;
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
Ganesan Ramalingam
36
100.00%
2
100.00%
Total
36
100.00%
2
100.00%



static void nlm_sata_intr_ack(struct irq_data *data)
{
	uint32_t val = 0;
	uint64_t regbase;

	regbase = nlm_get_sata_regbase(nlm_nodeid());
	val = nlm_read_sata_reg(regbase, SATA_INT);
	sata_set_glue_reg(regbase, SATA_INT, val);
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
Ganesan Ramalingam
45
100.00%
1
100.00%
Total
45
100.00%
1
100.00%



static void nlm_sata_fixup_bar(struct pci_dev *dev)
{
	/*
         * The AHCI resource is in BAR 0, move it to
         * BAR 5, where it is expected
         */
	dev->resource[5] = dev->resource[0];
	memset(&dev->resource[0], 0, sizeof(dev->resource[0]));
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
Ganesan Ramalingam
49
100.00%
1
100.00%
Total
49
100.00%
1
100.00%



static void nlm_sata_fixup_final(struct pci_dev *dev)
{
	uint32_t val;
	uint64_t regbase;
	int node = 0; /* XLP3XX does not support multi-node */

	regbase = nlm_get_sata_regbase(node);

	/* clear pending interrupts and then enable them */
	val = nlm_read_sata_reg(regbase, SATA_INT);
	sata_set_glue_reg(regbase, SATA_INT, val);

	/* Mask the core interrupt. If all the interrupts
         * are enabled there are spurious interrupt flow
         * happening, to avoid only enable core interrupt
         * mask.
         */
	sata_set_glue_reg(regbase, SATA_INT_MASK, 0x1);

	dev->irq = PIC_SATA_IRQ;
	nlm_set_pic_extra_ack(node, PIC_SATA_IRQ, nlm_sata_intr_ack);
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
Ganesan Ramalingam
74
100.00%
1
100.00%
Total
74
100.00%
1
100.00%


arch_initcall(nlm_ahci_init);

DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_NETLOGIC, PCI_DEVICE_ID_NLM_SATA,
		nlm_sata_fixup_bar);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_NETLOGIC, PCI_DEVICE_ID_NLM_SATA,
		nlm_sata_fixup_final);
Overall Contributors
Person
Tokens
Prop
Commits
CommitProp
Ganesan Ramalingam
702
100.00%
2
100.00%
Total
702
100.00%
2
100.00%
Directory: arch/mips/netlogic/xlp

Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.