cregit-Linux how code gets into the kernel

Release 4.14 arch/mips/netlogic/xlr/platform-flash.c

/*
 * Copyright 2011, Netlogic Microsystems.
 * Copyright 2004, Matt Porter <mporter@kernel.crashing.org>
 *
 * This file is licensed under the terms of the GNU General Public
 * License version 2.  This program is licensed "as is" without any
 * warranty of any kind, whether express or implied.
 */

#include <linux/device.h>
#include <linux/platform_device.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/delay.h>
#include <linux/ioport.h>
#include <linux/resource.h>
#include <linux/spi/flash.h>

#include <linux/mtd/mtd.h>
#include <linux/mtd/physmap.h>
#include <linux/mtd/rawnand.h>
#include <linux/mtd/partitions.h>

#include <asm/netlogic/haldefs.h>
#include <asm/netlogic/xlr/iomap.h>
#include <asm/netlogic/xlr/flash.h>
#include <asm/netlogic/xlr/bridge.h>
#include <asm/netlogic/xlr/gpio.h>
#include <asm/netlogic/xlr/xlr.h>

/*
 * Default NOR partition layout
 */

static struct mtd_partition xlr_nor_parts[] = {
	{
		.name = "User FS",
		.offset = 0x800000,
		.size	= MTDPART_SIZ_FULL,
        }
};

/*
 * Default NAND partition layout
 */

static struct mtd_partition xlr_nand_parts[] = {
	{
		.name	= "Root Filesystem",
		.offset = 64 * 64 * 2048,
		.size	= 432 * 64 * 2048,
        },
	{
		.name	= "Home Filesystem",
		.offset = MTDPART_OFS_APPEND,
		.size	= MTDPART_SIZ_FULL,
        },
};

/* Use PHYSMAP flash for NOR */

struct physmap_flash_data xlr_nor_data = {
	.width		= 2,
	.parts		= xlr_nor_parts,
	.nr_parts	= ARRAY_SIZE(xlr_nor_parts),
};


static struct resource xlr_nor_res[] = {
	{
		.flags	= IORESOURCE_MEM,
        },
};


static struct platform_device xlr_nor_dev = {
	.name	= "physmap-flash",
	.dev	= {
		.platform_data	= &xlr_nor_data,
        },
	.num_resources	= ARRAY_SIZE(xlr_nor_res),
	.resource	= xlr_nor_res,
};

/*
 * Use "gen_nand" driver for NAND flash
 *
 * There seems to be no way to store a private pointer containing
 * platform specific info in gen_nand drivier. We will use a global
 * struct for now, since we currently have only one NAND chip per board.
 */

struct xlr_nand_flash_priv {
	
int cs;
	
uint64_t flash_mmio;
};


static struct xlr_nand_flash_priv nand_priv;


static void xlr_nand_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl) { if (ctrl & NAND_CLE) nlm_write_reg(nand_priv.flash_mmio, FLASH_NAND_CLE(nand_priv.cs), cmd); else if (ctrl & NAND_ALE) nlm_write_reg(nand_priv.flash_mmio, FLASH_NAND_ALE(nand_priv.cs), cmd); }

Contributors

PersonTokensPropCommitsCommitProp
Ganesan Ramalingam63100.00%1100.00%
Total63100.00%1100.00%

struct platform_nand_data xlr_nand_data = { .chip = { .nr_chips = 1, .nr_partitions = ARRAY_SIZE(xlr_nand_parts), .chip_delay = 50, .partitions = xlr_nand_parts, }, .ctrl = { .cmd_ctrl = xlr_nand_ctrl, }, }; static struct resource xlr_nand_res[] = { { .flags = IORESOURCE_MEM, }, }; static struct platform_device xlr_nand_dev = { .name = "gen_nand", .id = -1, .num_resources = ARRAY_SIZE(xlr_nand_res), .resource = xlr_nand_res, .dev = { .platform_data = &xlr_nand_data, } }; /* * XLR/XLS supports upto 8 devices on its FLASH interface. The value in * FLASH_BAR (on the MEM/IO bridge) gives the base for mapping all the * flash devices. * Under this, each flash device has an offset and size given by the * CSBASE_ADDR and CSBASE_MASK registers for the device. * * The CSBASE_ registers are expected to be setup by the bootloader. */
static void setup_flash_resource(uint64_t flash_mmio, uint64_t flash_map_base, int cs, struct resource *res) { u32 base, mask; base = nlm_read_reg(flash_mmio, FLASH_CSBASE_ADDR(cs)); mask = nlm_read_reg(flash_mmio, FLASH_CSADDR_MASK(cs)); res->start = flash_map_base + ((unsigned long)base << 16); res->end = res->start + (mask + 1) * 64 * 1024; }

Contributors

PersonTokensPropCommitsCommitProp
Ganesan Ramalingam83100.00%1100.00%
Total83100.00%1100.00%


static int __init xlr_flash_init(void) { uint64_t gpio_mmio, flash_mmio, flash_map_base; u32 gpio_resetcfg, flash_bar; int cs, boot_nand, boot_nor; /* Flash address bits 39:24 is in bridge flash BAR */ flash_bar = nlm_read_reg(nlm_io_base, BRIDGE_FLASH_BAR); flash_map_base = (flash_bar & 0xffff0000) << 8; gpio_mmio = nlm_mmio_base(NETLOGIC_IO_GPIO_OFFSET); flash_mmio = nlm_mmio_base(NETLOGIC_IO_FLASH_OFFSET); /* Get the chip reset config */ gpio_resetcfg = nlm_read_reg(gpio_mmio, GPIO_PWRON_RESET_CFG_REG); /* Check for boot flash type */ boot_nor = boot_nand = 0; if (nlm_chip_is_xls()) { /* On XLS, check boot from NAND bit (GPIO reset reg bit 16) */ if (gpio_resetcfg & (1 << 16)) boot_nand = 1; /* check boot from PCMCIA, (GPIO reset reg bit 15 */ if ((gpio_resetcfg & (1 << 15)) == 0) boot_nor = 1; /* not set, booted from NOR */ } else { /* XLR */ /* check boot from PCMCIA (bit 16 in GPIO reset on XLR) */ if ((gpio_resetcfg & (1 << 16)) == 0) boot_nor = 1; /* not set, booted from NOR */ } /* boot flash at chip select 0 */ cs = 0; if (boot_nand) { nand_priv.cs = cs; nand_priv.flash_mmio = flash_mmio; setup_flash_resource(flash_mmio, flash_map_base, cs, xlr_nand_res); /* Initialize NAND flash at CS 0 */ nlm_write_reg(flash_mmio, FLASH_CSDEV_PARM(cs), FLASH_NAND_CSDEV_PARAM); nlm_write_reg(flash_mmio, FLASH_CSTIME_PARMA(cs), FLASH_NAND_CSTIME_PARAMA); nlm_write_reg(flash_mmio, FLASH_CSTIME_PARMB(cs), FLASH_NAND_CSTIME_PARAMB); pr_info("ChipSelect %d: NAND Flash %pR\n", cs, xlr_nand_res); return platform_device_register(&xlr_nand_dev); } if (boot_nor) { setup_flash_resource(flash_mmio, flash_map_base, cs, xlr_nor_res); pr_info("ChipSelect %d: NOR Flash %pR\n", cs, xlr_nor_res); return platform_device_register(&xlr_nor_dev); } return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Ganesan Ramalingam268100.00%1100.00%
Total268100.00%1100.00%

arch_initcall(xlr_flash_init);

Overall Contributors

PersonTokensPropCommitsCommitProp
Ganesan Ramalingam74899.87%150.00%
Boris Brezillon10.13%150.00%
Total749100.00%2100.00%
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with cregit.