cregit-Linux how code gets into the kernel

Release 4.14 arch/mips/pci/pci-mt7620.c

Directory: arch/mips/pci
/*
 *  Ralink MT7620A SoC PCI support
 *
 *  Copyright (C) 2007-2013 Bruce Chang (Mediatek)
 *  Copyright (C) 2013-2016 John Crispin <john@phrozen.org>
 *
 *  This program is free software; you can redistribute it and/or modify it
 *  under the terms of the GNU General Public License version 2 as published
 *  by the Free Software Foundation.
 */

#include <linux/types.h>
#include <linux/pci.h>
#include <linux/io.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/of.h>
#include <linux/of_irq.h>
#include <linux/of_pci.h>
#include <linux/reset.h>
#include <linux/platform_device.h>

#include <asm/mach-ralink/ralink_regs.h>
#include <asm/mach-ralink/mt7620.h>


#define RALINK_PCI_IO_MAP_BASE		0x10160000

#define RALINK_PCI_MEMORY_BASE		0x0


#define RALINK_INT_PCIE0		4


#define RALINK_CLKCFG1			0x30

#define RALINK_GPIOMODE			0x60


#define PPLL_CFG1			0x9c

#define PDRV_SW_SET			BIT(23)


#define PPLL_DRV			0xa0

#define PDRV_SW_SET			(1<<31)

#define LC_CKDRVPD			(1<<19)

#define LC_CKDRVOHZ			(1<<18)

#define LC_CKDRVHZ			(1<<17)

#define LC_CKTEST			(1<<16)

/* PCI Bridge registers */

#define RALINK_PCI_PCICFG_ADDR		0x00

#define PCIRST				BIT(1)


#define RALINK_PCI_PCIENA		0x0C

#define PCIINT2				BIT(20)


#define RALINK_PCI_CONFIG_ADDR		0x20

#define RALINK_PCI_CONFIG_DATA_VIRT_REG	0x24

#define RALINK_PCI_MEMBASE		0x28

#define RALINK_PCI_IOBASE		0x2C

/* PCI RC registers */

#define RALINK_PCI0_BAR0SETUP_ADDR	0x10

#define RALINK_PCI0_IMBASEBAR0_ADDR	0x18

#define RALINK_PCI0_ID			0x30

#define RALINK_PCI0_CLASS		0x34

#define RALINK_PCI0_SUBID		0x38

#define RALINK_PCI0_STATUS		0x50

#define PCIE_LINK_UP_ST			BIT(0)


#define PCIEPHY0_CFG			0x90


#define RALINK_PCIEPHY_P0_CTL_OFFSET	0x7498

#define RALINK_PCIE0_CLK_EN		(1 << 26)


#define BUSY				0x80000000

#define WAITRETRY_MAX			10

#define WRITE_MODE			(1UL << 23)

#define DATA_SHIFT			0

#define ADDR_SHIFT			8



static void __iomem *bridge_base;

static void __iomem *pcie_base;


static struct reset_control *rstpcie0;


static inline void bridge_w32(u32 val, unsigned reg) { iowrite32(val, bridge_base + reg); }

Contributors

PersonTokensPropCommitsCommitProp
John Crispin22100.00%1100.00%
Total22100.00%1100.00%


static inline u32 bridge_r32(unsigned reg) { return ioread32(bridge_base + reg); }

Contributors

PersonTokensPropCommitsCommitProp
John Crispin18100.00%1100.00%
Total18100.00%1100.00%


static inline void pcie_w32(u32 val, unsigned reg) { iowrite32(val, pcie_base + reg); }

Contributors

PersonTokensPropCommitsCommitProp
John Crispin22100.00%1100.00%
Total22100.00%1100.00%


static inline u32 pcie_r32(unsigned reg) { return ioread32(pcie_base + reg); }

Contributors

PersonTokensPropCommitsCommitProp
John Crispin18100.00%1100.00%
Total18100.00%1100.00%


static inline void pcie_m32(u32 clr, u32 set, unsigned reg) { u32 val = pcie_r32(reg); val &= ~clr; val |= set; pcie_w32(val, reg); }

Contributors

PersonTokensPropCommitsCommitProp
John Crispin40100.00%1100.00%
Total40100.00%1100.00%


static int wait_pciephy_busy(void) { unsigned long reg_value = 0x0, retry = 0; while (1) { reg_value = pcie_r32(PCIEPHY0_CFG); if (reg_value & BUSY) mdelay(100); else break; if (retry++ > WAITRETRY_MAX) { printk(KERN_WARN "PCIE-PHY retry failed.\n"); return -1; } } return 0; }

Contributors

PersonTokensPropCommitsCommitProp
John Crispin66100.00%1100.00%
Total66100.00%1100.00%


static void pcie_phy(unsigned long addr, unsigned long val) { wait_pciephy_busy(); pcie_w32(WRITE_MODE | (val << DATA_SHIFT) | (addr << ADDR_SHIFT), PCIEPHY0_CFG); mdelay(1); wait_pciephy_busy(); }

Contributors

PersonTokensPropCommitsCommitProp
John Crispin44100.00%1100.00%
Total44100.00%1100.00%


static int pci_config_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *val) { unsigned int slot = PCI_SLOT(devfn); u8 func = PCI_FUNC(devfn); u32 address; u32 data; u32 num = 0; if (bus) num = bus->number; address = (((where & 0xF00) >> 8) << 24) | (num << 16) | (slot << 11) | (func << 8) | (where & 0xfc) | 0x80000000; bridge_w32(address, RALINK_PCI_CONFIG_ADDR); data = bridge_r32(RALINK_PCI_CONFIG_DATA_VIRT_REG); switch (size) { case 1: *val = (data >> ((where & 3) << 3)) & 0xff; break; case 2: *val = (data >> ((where & 3) << 3)) & 0xffff; break; case 4: *val = data; break; } return PCIBIOS_SUCCESSFUL; }

Contributors

PersonTokensPropCommitsCommitProp
John Crispin183100.00%1100.00%
Total183100.00%1100.00%


static int pci_config_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val) { unsigned int slot = PCI_SLOT(devfn); u8 func = PCI_FUNC(devfn); u32 address; u32 data; u32 num = 0; if (bus) num = bus->number; address = (((where & 0xF00) >> 8) << 24) | (num << 16) | (slot << 11) | (func << 8) | (where & 0xfc) | 0x80000000; bridge_w32(address, RALINK_PCI_CONFIG_ADDR); data = bridge_r32(RALINK_PCI_CONFIG_DATA_VIRT_REG); switch (size) { case 1: data = (data & ~(0xff << ((where & 3) << 3))) | (val << ((where & 3) << 3)); break; case 2: data = (data & ~(0xffff << ((where & 3) << 3))) | (val << ((where & 3) << 3)); break; case 4: data = val; break; } bridge_w32(data, RALINK_PCI_CONFIG_DATA_VIRT_REG); return PCIBIOS_SUCCESSFUL; }

Contributors

PersonTokensPropCommitsCommitProp
John Crispin220100.00%1100.00%
Total220100.00%1100.00%

struct pci_ops mt7620_pci_ops = { .read = pci_config_read, .write = pci_config_write, }; static struct resource mt7620_res_pci_mem1; static struct resource mt7620_res_pci_io1; struct pci_controller mt7620_controller = { .pci_ops = &mt7620_pci_ops, .mem_resource = &mt7620_res_pci_mem1, .mem_offset = 0x00000000UL, .io_resource = &mt7620_res_pci_io1, .io_offset = 0x00000000UL, .io_map_base = 0xa0000000, };
static int mt7620_pci_hw_init(struct platform_device *pdev) { /* bypass PCIe DLL */ pcie_phy(0x0, 0x80); pcie_phy(0x1, 0x04); /* Elastic buffer control */ pcie_phy(0x68, 0xB4); /* put core into reset */ pcie_m32(0, PCIRST, RALINK_PCI_PCICFG_ADDR); reset_control_assert(rstpcie0); /* disable power and all clocks */ rt_sysc_m32(RALINK_PCIE0_CLK_EN, 0, RALINK_CLKCFG1); rt_sysc_m32(LC_CKDRVPD, PDRV_SW_SET, PPLL_DRV); /* bring core out of reset */ reset_control_deassert(rstpcie0); rt_sysc_m32(0, RALINK_PCIE0_CLK_EN, RALINK_CLKCFG1); mdelay(100); if (!(rt_sysc_r32(PPLL_CFG1) & PDRV_SW_SET)) { dev_err(&pdev->dev, "MT7620 PPLL unlock\n"); reset_control_assert(rstpcie0); rt_sysc_m32(RALINK_PCIE0_CLK_EN, 0, RALINK_CLKCFG1); return -1; } /* power up the bus */ rt_sysc_m32(LC_CKDRVHZ | LC_CKDRVOHZ, LC_CKDRVPD | PDRV_SW_SET, PPLL_DRV); return 0; }

Contributors

PersonTokensPropCommitsCommitProp
John Crispin147100.00%1100.00%
Total147100.00%1100.00%


static int mt7628_pci_hw_init(struct platform_device *pdev) { u32 val = 0; /* bring the core out of reset */ rt_sysc_m32(BIT(16), 0, RALINK_GPIOMODE); reset_control_deassert(rstpcie0); /* enable the pci clk */ rt_sysc_m32(0, RALINK_PCIE0_CLK_EN, RALINK_CLKCFG1); mdelay(100); /* voodoo from the SDK driver */ pcie_m32(~0xff, 0x5, RALINK_PCIEPHY_P0_CTL_OFFSET); pci_config_read(NULL, 0, 0x70c, 4, &val); val &= ~(0xff) << 8; val |= 0x50 << 8; pci_config_write(NULL, 0, 0x70c, 4, val); pci_config_read(NULL, 0, 0x70c, 4, &val); dev_err(&pdev->dev, "Port 0 N_FTS = %x\n", (unsigned int) val); return 0; }

Contributors

PersonTokensPropCommitsCommitProp
John Crispin135100.00%1100.00%
Total135100.00%1100.00%


static int mt7620_pci_probe(struct platform_device *pdev) { struct resource *bridge_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); struct resource *pcie_res = platform_get_resource(pdev, IORESOURCE_MEM, 1); u32 val = 0; rstpcie0 = devm_reset_control_get_exclusive(&pdev->dev, "pcie0"); if (IS_ERR(rstpcie0)) return PTR_ERR(rstpcie0); bridge_base = devm_ioremap_resource(&pdev->dev, bridge_res); if (IS_ERR(bridge_base)) return PTR_ERR(bridge_base); pcie_base = devm_ioremap_resource(&pdev->dev, pcie_res); if (IS_ERR(pcie_base)) return PTR_ERR(pcie_base); iomem_resource.start = 0; iomem_resource.end = ~0; ioport_resource.start = 0; ioport_resource.end = ~0; /* bring up the pci core */ switch (ralink_soc) { case MT762X_SOC_MT7620A: if (mt7620_pci_hw_init(pdev)) return -1; break; case MT762X_SOC_MT7628AN: if (mt7628_pci_hw_init(pdev)) return -1; break; default: dev_err(&pdev->dev, "pcie is not supported on this hardware\n"); return -1; } mdelay(50); /* enable write access */ pcie_m32(PCIRST, 0, RALINK_PCI_PCICFG_ADDR); mdelay(100); /* check if there is a card present */ if ((pcie_r32(RALINK_PCI0_STATUS) & PCIE_LINK_UP_ST) == 0) { reset_control_assert(rstpcie0); rt_sysc_m32(RALINK_PCIE0_CLK_EN, 0, RALINK_CLKCFG1); if (ralink_soc == MT762X_SOC_MT7620A) rt_sysc_m32(LC_CKDRVPD, PDRV_SW_SET, PPLL_DRV); dev_err(&pdev->dev, "PCIE0 no card, disable it(RST&CLK)\n"); return -1; } /* setup ranges */ bridge_w32(0xffffffff, RALINK_PCI_MEMBASE); bridge_w32(RALINK_PCI_IO_MAP_BASE, RALINK_PCI_IOBASE); pcie_w32(0x7FFF0001, RALINK_PCI0_BAR0SETUP_ADDR); pcie_w32(RALINK_PCI_MEMORY_BASE, RALINK_PCI0_IMBASEBAR0_ADDR); pcie_w32(0x06040001, RALINK_PCI0_CLASS); /* enable interrupts */ pcie_m32(0, PCIINT2, RALINK_PCI_PCIENA); /* voodoo from the SDK driver */ pci_config_read(NULL, 0, 4, 4, &val); pci_config_write(NULL, 0, 4, 4, val | 0x7); pci_load_of_ranges(&mt7620_controller, pdev->dev.of_node); register_pci_controller(&mt7620_controller); return 0; }

Contributors

PersonTokensPropCommitsCommitProp
John Crispin35895.98%133.33%
Wei Yongjun143.75%133.33%
Philipp Zabel10.27%133.33%
Total373100.00%3100.00%


int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { u16 cmd; u32 val; int irq = 0; if ((dev->bus->number == 0) && (slot == 0)) { pcie_w32(0x7FFF0001, RALINK_PCI0_BAR0SETUP_ADDR); pci_config_write(dev->bus, 0, PCI_BASE_ADDRESS_0, 4, RALINK_PCI_MEMORY_BASE); pci_config_read(dev->bus, 0, PCI_BASE_ADDRESS_0, 4, &val); } else if ((dev->bus->number == 1) && (slot == 0x0)) { irq = RALINK_INT_PCIE0; } else { dev_err(&dev->dev, "no irq found - bus=0x%x, slot = 0x%x\n", dev->bus->number, slot); return 0; } dev_err(&dev->dev, "card - bus=0x%x, slot = 0x%x irq=%d\n", dev->bus->number, slot, irq); /* configure the cache line size to 0x14 */ pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 0x14); /* configure latency timer to 0xff */ pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0xff); pci_read_config_word(dev, PCI_COMMAND, &cmd); /* setup the slot */ cmd = cmd | PCI_COMMAND_MASTER | PCI_COMMAND_IO | PCI_COMMAND_MEMORY; pci_write_config_word(dev, PCI_COMMAND, cmd); pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); return irq; }

Contributors

PersonTokensPropCommitsCommitProp
John Crispin219100.00%1100.00%
Total219100.00%1100.00%


int pcibios_plat_dev_init(struct pci_dev *dev) { return 0; }

Contributors

PersonTokensPropCommitsCommitProp
John Crispin13100.00%1100.00%
Total13100.00%1100.00%

static const struct of_device_id mt7620_pci_ids[] = { { .compatible = "mediatek,mt7620-pci" }, {}, }; static struct platform_driver mt7620_pci_driver = { .probe = mt7620_pci_probe, .driver = { .name = "mt7620-pci", .of_match_table = of_match_ptr(mt7620_pci_ids), }, };
static int __init mt7620_pci_init(void) { return platform_driver_register(&mt7620_pci_driver); }

Contributors

PersonTokensPropCommitsCommitProp
John Crispin16100.00%1100.00%
Total16100.00%1100.00%

arch_initcall(mt7620_pci_init);

Overall Contributors

PersonTokensPropCommitsCommitProp
John Crispin184399.19%250.00%
Wei Yongjun140.75%125.00%
Philipp Zabel10.05%125.00%
Total1858100.00%4100.00%
Directory: arch/mips/pci
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with cregit.