Release 4.14 arch/mips/pnx833x/common/setup.c
/*
* setup.c: Setup PNX833X Soc.
*
* Copyright 2008 NXP Semiconductors
* Chris Steel <chris.steel@nxp.com>
* Daniel Laird <daniel.j.laird@nxp.com>
*
* Based on software written by:
* Nikita Youshchenko <yoush@debian.org>, based on PNX8550 code.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/io.h>
#include <linux/pci.h>
#include <asm/reboot.h>
#include <pnx833x.h>
#include <gpio.h>
extern void pnx833x_board_setup(void);
extern void pnx833x_machine_restart(char *);
extern void pnx833x_machine_halt(void);
extern void pnx833x_machine_power_off(void);
int __init plat_mem_setup(void)
{
/* set mips clock to 320MHz */
#if defined(CONFIG_SOC_PNX8335)
PNX8335_WRITEFIELD(0x17, CLOCK_PLL_CPU_CTL, FREQ);
#endif
pnx833x_gpio_init(); /* so it will be ready in board_setup() */
pnx833x_board_setup();
_machine_restart = pnx833x_machine_restart;
_machine_halt = pnx833x_machine_halt;
pm_power_off = pnx833x_machine_power_off;
/* IO/MEM resources. */
set_io_port_base(KSEG1);
ioport_resource.start = 0;
ioport_resource.end = ~0;
iomem_resource.start = 0;
iomem_resource.end = ~0;
return 0;
}
Contributors
Person | Tokens | Prop | Commits | CommitProp |
Daniel Laird | 80 | 100.00% | 1 | 100.00% |
Total | 80 | 100.00% | 1 | 100.00% |
Overall Contributors
Person | Tokens | Prop | Commits | CommitProp |
Daniel Laird | 133 | 99.25% | 1 | 50.00% |
Ralf Bächle | 1 | 0.75% | 1 | 50.00% |
Total | 134 | 100.00% | 2 | 100.00% |
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.