cregit-Linux how code gets into the kernel

Release 4.14 arch/mn10300/proc-mn2ws0050/proc-init.c

/* MN2WS0050 processor initialisation
 *
 * Copyright (C) 2005 Red Hat, Inc. All Rights Reserved.
 * Written by David Howells (dhowells@redhat.com)
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * as published by the Free Software Foundation; either version
 * 2 of the License, or (at your option) any later version.
 */
#include <linux/sched.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/interrupt.h>

#include <asm/cacheflush.h>
#include <asm/processor.h>
#include <linux/uaccess.h>
#include <asm/io.h>
#include <linux/atomic.h>
#include <asm/smp.h>
#include <asm/pgalloc.h>
#include <asm/busctl-regs.h>
#include <unit/timex.h>
#include <asm/fpu.h>
#include <asm/rtc.h>


#define MEMCONF __SYSREGC(0xdf800400, u32)

/*
 * initialise the on-silicon processor peripherals
 */

asmlinkage void __init processor_init(void) { int loop; /* set up the exception table first */ for (loop = 0x000; loop < 0x400; loop += 8) __set_intr_stub(loop, __common_exception); __set_intr_stub(EXCEP_ITLBMISS, itlb_miss); __set_intr_stub(EXCEP_DTLBMISS, dtlb_miss); __set_intr_stub(EXCEP_IAERROR, itlb_aerror); __set_intr_stub(EXCEP_DAERROR, dtlb_aerror); __set_intr_stub(EXCEP_BUSERROR, raw_bus_error); __set_intr_stub(EXCEP_DOUBLE_FAULT, double_fault); __set_intr_stub(EXCEP_FPU_DISABLED, fpu_disabled); __set_intr_stub(EXCEP_SYSCALL0, system_call); __set_intr_stub(EXCEP_NMI, nmi_handler); __set_intr_stub(EXCEP_WDT, nmi_handler); __set_intr_stub(EXCEP_IRQ_LEVEL0, irq_handler); __set_intr_stub(EXCEP_IRQ_LEVEL1, irq_handler); __set_intr_stub(EXCEP_IRQ_LEVEL2, irq_handler); __set_intr_stub(EXCEP_IRQ_LEVEL3, irq_handler); __set_intr_stub(EXCEP_IRQ_LEVEL4, irq_handler); __set_intr_stub(EXCEP_IRQ_LEVEL5, irq_handler); __set_intr_stub(EXCEP_IRQ_LEVEL6, irq_handler); IVAR0 = EXCEP_IRQ_LEVEL0; IVAR1 = EXCEP_IRQ_LEVEL1; IVAR2 = EXCEP_IRQ_LEVEL2; IVAR3 = EXCEP_IRQ_LEVEL3; IVAR4 = EXCEP_IRQ_LEVEL4; IVAR5 = EXCEP_IRQ_LEVEL5; IVAR6 = EXCEP_IRQ_LEVEL6; #ifndef CONFIG_MN10300_HAS_CACHE_SNOOP mn10300_dcache_flush_inv(); mn10300_icache_inv(); #endif /* disable all interrupts and set to priority 6 (lowest) */ #ifdef CONFIG_SMP for (loop = 0; loop < GxICR_NUM_IRQS; loop++) GxICR(loop) = GxICR_LEVEL_6 | GxICR_DETECT; #else /* !CONFIG_SMP */ for (loop = 0; loop < NR_IRQS; loop++) GxICR(loop) = GxICR_LEVEL_6 | GxICR_DETECT; #endif /* !CONFIG_SMP */ /* clear the timers */ TM0MD = 0; TM1MD = 0; TM2MD = 0; TM3MD = 0; TM4MD = 0; TM5MD = 0; TM6MD = 0; TM6MDA = 0; TM6MDB = 0; TM7MD = 0; TM8MD = 0; TM9MD = 0; TM10MD = 0; TM11MD = 0; TM12MD = 0; TM13MD = 0; TM14MD = 0; TM15MD = 0; calibrate_clock(); }

Contributors

PersonTokensPropCommitsCommitProp
Akira Takeuchi322100.00%1100.00%
Total322100.00%1100.00%

/* * determine the memory size and base from the memory controller regs */
void __init get_mem_info(unsigned long *mem_base, unsigned long *mem_size) { unsigned long memconf = MEMCONF; unsigned long size = 0; /* order: MByte */ *mem_base = 0x90000000; /* fixed address */ switch (memconf & 0x00000003) { case 0x01: size = 256 / 8; /* 256 Mbit per chip */ break; case 0x02: size = 512 / 8; /* 512 Mbit per chip */ break; case 0x03: size = 1024 / 8; /* 1 Gbit per chip */ break; default: panic("Invalid SDRAM size"); break; } printk(KERN_INFO "DDR2-SDRAM: %luMB x 2 @%08lx\n", size, *mem_base); *mem_size = (size * 2) << 20; }

Contributors

PersonTokensPropCommitsCommitProp
Akira Takeuchi105100.00%1100.00%
Total105100.00%1100.00%


Overall Contributors

PersonTokensPropCommitsCommitProp
Akira Takeuchi47798.96%125.00%
Arnd Bergmann30.62%125.00%
Linus Torvalds10.21%125.00%
Arun Sharma10.21%125.00%
Total482100.00%4100.00%
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with cregit.