cregit-Linux how code gets into the kernel

Release 4.14 arch/mn10300/unit-asb2364/include/unit/serial.h

/* Unit-specific 8250 serial ports
 *
 * Copyright (C) 2005 Red Hat, Inc. All Rights Reserved.
 * Written by David Howells (dhowells@redhat.com)
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * as published by the Free Software Foundation; either version
 * 2 of the License, or (at your option) any later version.
 */

#ifndef _ASM_UNIT_SERIAL_H

#define _ASM_UNIT_SERIAL_H

#include <asm/cpu-regs.h>
#include <proc/irq.h>
#include <unit/fpga-regs.h>
#include <linux/serial_reg.h>


#define SERIAL_PORT0_BASE_ADDRESS	0xA8200000


#define SERIAL_IRQ	XIRQ1	
/* single serial (TL16C550C)    (Lo) */

/*
 * The ASB2364 has an 12.288 MHz clock
 * for your UART.
 *
 * It'd be nice if someone built a serial card with a 24.576 MHz
 * clock, since the 16550A is capable of handling a top speed of 1.5
 * megabits/second; but this requires the faster clock.
 */

#define BASE_BAUD (12288000 / 16)

/*
 * dispose of the /dev/ttyS0 and /dev/ttyS1 serial ports
 */
#ifndef CONFIG_GDBSTUB_ON_TTYSx


#define SERIAL_PORT_DFNS						\
	{                                                               \
                .baud_base      = BASE_BAUD,                            \
                .irq            = SERIAL_IRQ,                           \
                .flags          = STD_COM_FLAGS,                        \
                .iomem_base     = (u8 *) SERIAL_PORT0_BASE_ADDRESS,     \
                .iomem_reg_shift = 1,                                   \
                .io_type        = SERIAL_IO_MEM,                        \
        },

#ifndef __ASSEMBLY__


static inline void __debug_to_serial(const char *p, int n) { }

Contributors

PersonTokensPropCommitsCommitProp
Akira Takeuchi14100.00%1100.00%
Total14100.00%1100.00%

#endif /* !__ASSEMBLY__ */ #else /* CONFIG_GDBSTUB_ON_TTYSx */ #define SERIAL_PORT_DFNS /* stolen by gdb-stub */ #if defined(CONFIG_GDBSTUB_ON_TTYS0) #define GDBPORT_SERIAL_RX __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_RX * 2, u8) #define GDBPORT_SERIAL_TX __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_TX * 2, u8) #define GDBPORT_SERIAL_DLL __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLL * 2, u8) #define GDBPORT_SERIAL_DLM __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLM * 2, u8) #define GDBPORT_SERIAL_IER __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IER * 2, u8) #define GDBPORT_SERIAL_IIR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IIR * 2, u8) #define GDBPORT_SERIAL_FCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_FCR * 2, u8) #define GDBPORT_SERIAL_LCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LCR * 2, u8) #define GDBPORT_SERIAL_MCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MCR * 2, u8) #define GDBPORT_SERIAL_LSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LSR * 2, u8) #define GDBPORT_SERIAL_MSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MSR * 2, u8) #define GDBPORT_SERIAL_SCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_SCR * 2, u8) #define GDBPORT_SERIAL_IRQ SERIAL_IRQ #elif defined(CONFIG_GDBSTUB_ON_TTYS1) #error The ASB2364 does not have a /dev/ttyS1 #endif #ifndef __ASSEMBLY__
static inline void __debug_to_serial(const char *p, int n) { char ch; #define LSR_WAIT_FOR(STATE) \ do {} while (!(GDBPORT_SERIAL_LSR & UART_LSR_##STATE)) #define FLOWCTL_QUERY(LINE) \ ({ GDBPORT_SERIAL_MSR & UART_MSR_##LINE; }) #define FLOWCTL_WAIT_FOR(LINE) \ do {} while (!(GDBPORT_SERIAL_MSR & UART_MSR_##LINE)) #define FLOWCTL_CLEAR(LINE) \ do { GDBPORT_SERIAL_MCR &= ~UART_MCR_##LINE; } while (0) #define FLOWCTL_SET(LINE) \ do { GDBPORT_SERIAL_MCR |= UART_MCR_##LINE; } while (0) FLOWCTL_SET(DTR); for (; n > 0; n--) { LSR_WAIT_FOR(THRE); FLOWCTL_WAIT_FOR(CTS); ch = *p++; if (ch == 0x0a) { GDBPORT_SERIAL_TX = 0x0d; LSR_WAIT_FOR(THRE); FLOWCTL_WAIT_FOR(CTS); } GDBPORT_SERIAL_TX = ch; } FLOWCTL_CLEAR(DTR); }

Contributors

PersonTokensPropCommitsCommitProp
Akira Takeuchi122100.00%1100.00%
Total122100.00%1100.00%

#endif /* !__ASSEMBLY__ */ #endif /* CONFIG_GDBSTUB_ON_TTYSx */ #define SERIAL_INITIALIZE \ do { \ /* release reset */ \ ASB2364_FPGA_REG_RESET_UART = 0x0001; \ SyncExBus(); \ } while (0) #define SERIAL_CHECK_INTERRUPT \ do { \ if ((ASB2364_FPGA_REG_IRQ_UART & 0x0001) == 0x0001) { \ return IRQ_NONE; \ } \ } while (0) #define SERIAL_CLEAR_INTERRUPT \ do { \ ASB2364_FPGA_REG_IRQ_UART = 0x0001; \ SyncExBus(); \ } while (0) #define SERIAL_SET_INT_MASK \ do { \ ASB2364_FPGA_REG_MASK_UART = 0x0001; \ SyncExBus(); \ } while (0) #define SERIAL_CLEAR_INT_MASK \ do { \ ASB2364_FPGA_REG_MASK_UART = 0x0000; \ SyncExBus(); \ } while (0) #endif /* _ASM_UNIT_SERIAL_H */

Overall Contributors

PersonTokensPropCommitsCommitProp
Akira Takeuchi28795.99%150.00%
David Howells124.01%150.00%
Total299100.00%2100.00%
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with cregit.