cregit-Linux how code gets into the kernel

Release 4.14 arch/powerpc/oprofile/op_model_7450.c

/*
 * arch/powerpc/oprofile/op_model_7450.c
 *
 * Freescale 745x/744x oprofile support, based on fsl_booke support
 * Copyright (C) 2004 Anton Blanchard <anton@au.ibm.com>, IBM
 *
 * Copyright (c) 2004 Freescale Semiconductor, Inc
 *
 * Author: Andy Fleming
 * Maintainer: Kumar Gala <galak@kernel.crashing.org>
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * as published by the Free Software Foundation; either version
 * 2 of the License, or (at your option) any later version.
 */

#include <linux/oprofile.h>
#include <linux/smp.h>
#include <asm/ptrace.h>
#include <asm/processor.h>
#include <asm/cputable.h>
#include <asm/page.h>
#include <asm/pmc.h>
#include <asm/oprofile_impl.h>


static unsigned long reset_value[OP_MAX_COUNTER];


static int oprofile_running;




static u32 mmcr0_val, mmcr1_val, mmcr2_val, num_pmcs;


#define MMCR0_PMC1_SHIFT	6

#define MMCR0_PMC2_SHIFT	0

#define MMCR1_PMC3_SHIFT	27

#define MMCR1_PMC4_SHIFT	22

#define MMCR1_PMC5_SHIFT	17

#define MMCR1_PMC6_SHIFT	11


#define mmcr0_event1(event) \
	((event << MMCR0_PMC1_SHIFT) & MMCR0_PMC1SEL)

#define mmcr0_event2(event) \
	((event << MMCR0_PMC2_SHIFT) & MMCR0_PMC2SEL)


#define mmcr1_event3(event) \
	((event << MMCR1_PMC3_SHIFT) & MMCR1_PMC3SEL)

#define mmcr1_event4(event) \
	((event << MMCR1_PMC4_SHIFT) & MMCR1_PMC4SEL)

#define mmcr1_event5(event) \
	((event << MMCR1_PMC5_SHIFT) & MMCR1_PMC5SEL)

#define mmcr1_event6(event) \
	((event << MMCR1_PMC6_SHIFT) & MMCR1_PMC6SEL)


#define MMCR0_INIT (MMCR0_FC | MMCR0_FCS | MMCR0_FCP | MMCR0_FCM1 | MMCR0_FCM0)

/* Unfreezes the counters on this CPU, enables the interrupt,
 * enables the counters to trigger the interrupt, and sets the
 * counters to only count when the mark bit is not set.
 */

static void pmc_start_ctrs(void) { u32 mmcr0 = mfspr(SPRN_MMCR0); mmcr0 &= ~(MMCR0_FC | MMCR0_FCM0); mmcr0 |= (MMCR0_FCECE | MMCR0_PMC1CE | MMCR0_PMCnCE | MMCR0_PMXE); mtspr(SPRN_MMCR0, mmcr0); }

Contributors

PersonTokensPropCommitsCommitProp
Andy Fleming44100.00%1100.00%
Total44100.00%1100.00%

/* Disables the counters on this CPU, and freezes them */
static void pmc_stop_ctrs(void) { u32 mmcr0 = mfspr(SPRN_MMCR0); mmcr0 |= MMCR0_FC; mmcr0 &= ~(MMCR0_FCECE | MMCR0_PMC1CE | MMCR0_PMCnCE | MMCR0_PMXE); mtspr(SPRN_MMCR0, mmcr0); }

Contributors

PersonTokensPropCommitsCommitProp
Andy Fleming40100.00%1100.00%
Total40100.00%1100.00%

/* Configures the counters on this CPU based on the global * settings */
static int fsl7450_cpu_setup(struct op_counter_config *ctr) { /* freeze all counters */ pmc_stop_ctrs(); mtspr(SPRN_MMCR0, mmcr0_val); mtspr(SPRN_MMCR1, mmcr1_val); if (num_pmcs > 4) mtspr(SPRN_MMCR2, mmcr2_val); return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Andy Fleming3577.78%250.00%
Octavian Purdila613.33%125.00%
Bob Nelson48.89%125.00%
Total45100.00%4100.00%

/* Configures the global settings for the countes on all CPUs. */
static int fsl7450_reg_setup(struct op_counter_config *ctr, struct op_system_config *sys, int num_ctrs) { int i; num_pmcs = num_ctrs; /* Our counters count up, and "count" refers to * how much before the next interrupt, and we interrupt * on overflow. So we calculate the starting value * which will give us "count" until overflow. * Then we set the events on the enabled counters */ for (i = 0; i < num_ctrs; ++i) reset_value[i] = 0x80000000UL - ctr[i].count; /* Set events for Counters 1 & 2 */ mmcr0_val = MMCR0_INIT | mmcr0_event1(ctr[0].event) | mmcr0_event2(ctr[1].event); /* Setup user/kernel bits */ if (sys->enable_kernel) mmcr0_val &= ~(MMCR0_FCS); if (sys->enable_user) mmcr0_val &= ~(MMCR0_FCP); /* Set events for Counters 3-6 */ mmcr1_val = mmcr1_event3(ctr[2].event) | mmcr1_event4(ctr[3].event); if (num_ctrs > 4) mmcr1_val |= mmcr1_event5(ctr[4].event) | mmcr1_event6(ctr[5].event); mmcr2_val = 0; return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Andy Fleming14689.02%133.33%
Octavian Purdila148.54%133.33%
Bob Nelson42.44%133.33%
Total164100.00%3100.00%

/* Sets the counters on this CPU to the chosen values, and starts them */
static int fsl7450_start(struct op_counter_config *ctr) { int i; mtmsr(mfmsr() | MSR_PMM); for (i = 0; i < num_pmcs; ++i) { if (ctr[i].enabled) classic_ctr_write(i, reset_value[i]); else classic_ctr_write(i, 0); } /* Clear the freeze bit, and enable the interrupt. * The counters won't actually start until the rfi clears * the PMM bit */ pmc_start_ctrs(); oprofile_running = 1; return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Andy Fleming6890.67%125.00%
Bob Nelson45.33%125.00%
Olof Johansson22.67%125.00%
Octavian Purdila11.33%125.00%
Total75100.00%4100.00%

/* Stop the counters on this CPU */
static void fsl7450_stop(void) { /* freeze counters */ pmc_stop_ctrs(); oprofile_running = 0; mb(); }

Contributors

PersonTokensPropCommitsCommitProp
Andy Fleming19100.00%1100.00%
Total19100.00%1100.00%

/* Handle the interrupt on this CPU, and log a sample for each * event that triggered the interrupt */
static void fsl7450_handle_interrupt(struct pt_regs *regs, struct op_counter_config *ctr) { unsigned long pc; int is_kernel; int val; int i; /* set the PMM bit (see comment below) */ mtmsr(mfmsr() | MSR_PMM); pc = mfspr(SPRN_SIAR); is_kernel = is_kernel_addr(pc); for (i = 0; i < num_pmcs; ++i) { val = classic_ctr_read(i); if (val < 0) { if (oprofile_running && ctr[i].enabled) { oprofile_add_ext_sample(pc, regs, i, is_kernel); classic_ctr_write(i, reset_value[i]); } else { classic_ctr_write(i, 0); } } } /* The freeze bit was set by the interrupt. */ /* Clear the freeze bit, and reenable the interrupt. * The counters won't actually start until the rfi clears * the PM/M bit */ pmc_start_ctrs(); }

Contributors

PersonTokensPropCommitsCommitProp
Andy Fleming11990.84%120.00%
Anton Blanchard75.34%120.00%
Olof Johansson32.29%120.00%
Bob Nelson10.76%120.00%
Octavian Purdila10.76%120.00%
Total131100.00%5100.00%

struct op_powerpc_model op_model_7450= { .reg_setup = fsl7450_reg_setup, .cpu_setup = fsl7450_cpu_setup, .start = fsl7450_start, .stop = fsl7450_stop, .handle_interrupt = fsl7450_handle_interrupt, };

Overall Contributors

PersonTokensPropCommitsCommitProp
Andy Fleming62992.64%228.57%
Octavian Purdila243.53%114.29%
Bob Nelson131.91%114.29%
Anton Blanchard71.03%114.29%
Olof Johansson50.74%114.29%
Uwe Zeisberger10.15%114.29%
Total679100.00%7100.00%
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with cregit.