Release 4.14 arch/powerpc/platforms/83xx/km83xx.c

/*
 * Copyright 2008-2011 DENX Software Engineering GmbH
 * Author: Heiko Schocher <hs@denx.de>
 *
 * Description:
 * Keymile 83xx platform specific routines.
 *
 * This program is free software; you can redistribute it and/or modify it
 * under  the terms of  the GNU General  Public License as published by the
 * Free Software Foundation;  either version 2 of the  License, or (at your
 * option) any later version.
 */

#include <linux/stddef.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/reboot.h>
#include <linux/pci.h>
#include <linux/kdev_t.h>
#include <linux/major.h>
#include <linux/console.h>
#include <linux/delay.h>
#include <linux/seq_file.h>
#include <linux/root_dev.h>
#include <linux/initrd.h>
#include <linux/of_platform.h>
#include <linux/of_device.h>

#include <linux/atomic.h>
#include <linux/time.h>
#include <linux/io.h>
#include <asm/machdep.h>
#include <asm/ipic.h>
#include <asm/irq.h>
#include <asm/prom.h>
#include <asm/udbg.h>
#include <sysdev/fsl_soc.h>
#include <sysdev/fsl_pci.h>
#include <soc/fsl/qe/qe.h>
#include <soc/fsl/qe/qe_ic.h>

#include "mpc83xx.h"


#define SVR_REV(svr)    (((svr) >>  0) & 0xFFFF) 
/* Revision field */



static void quirk_mpc8360e_qe_enet10(void)
{
	/*
         * handle mpc8360E Erratum QE_ENET10:
         * RGMII AC values do not meet the specification
         */
	uint svid = mfspr(SPRN_SVR);
	struct	device_node *np_par;
	struct	resource res;
	void	__iomem *base;
	int	ret;

	np_par = of_find_node_by_name(NULL, "par_io");
	if (np_par == NULL) {
		pr_warn("%s couldn;t find par_io node\n", __func__);
		return;
	}
	/* Map Parallel I/O ports registers */
	ret = of_address_to_resource(np_par, 0, &res);
	if (ret) {
		pr_warn("%s couldn;t map par_io registers\n", __func__);
		return;
	}

	base = ioremap(res.start, res.end - res.start + 1);

	/*
         * set output delay adjustments to default values according
         * table 5 in Errata Rev. 5, 9/2011:
         *
         * write 0b01 to UCC1 bits 18:19
         * write 0b01 to UCC2 option 1 bits 4:5
         * write 0b01 to UCC2 option 2 bits 16:17
         */
	clrsetbits_be32((base + 0xa8), 0x0c00f000, 0x04005000);

	/*
         * set output delay adjustments to default values according
         * table 3-13 in Reference Manual Rev.3 05/2010:
         *
         * write 0b01 to UCC2 option 2 bits 16:17
         * write 0b0101 to UCC1 bits 20:23
         * write 0b0101 to UCC2 option 1 bits 24:27
         */
	clrsetbits_be32((base + 0xac), 0x0000cff0, 0x00004550);

	if (SVR_REV(svid) == 0x0021) {
		/*
                 * UCC2 option 1: write 0b1010 to bits 24:27
                 * at address IMMRBAR+0x14AC
                 */
		clrsetbits_be32((base + 0xac), 0x000000f0, 0x000000a0);
	} else if (SVR_REV(svid) == 0x0020) {
		/*
                 * UCC1: write 0b11 to bits 18:19
                 * at address IMMRBAR+0x14A8
                 */
		setbits32((base + 0xa8), 0x00003000);

		/*
                 * UCC2 option 1: write 0b11 to bits 4:5
                 * at address IMMRBAR+0x14A8
                 */
		setbits32((base + 0xa8), 0x0c000000);

		/*
                 * UCC2 option 2: write 0b11 to bits 16:17
                 * at address IMMRBAR+0x14AC
                 */
		setbits32((base + 0xac), 0x0000c000);
	}
	iounmap(base);
	of_node_put(np_par);
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
Heiko Schocher
120
55.56%
1
25.00%
Christian Herzig
85
39.35%
1
25.00%
Gerlando Falauto
9
4.17%
1
25.00%
Holger Brunck
2
0.93%
1
25.00%
Total
216
100.00%
4
100.00%

/* ************************************************************************
 *
 * Setup the architecture
 *
 */


static void __init mpc83xx_km_setup_arch(void)
{
#ifdef CONFIG_QUICC_ENGINE
	struct device_node *np;
#endif

	mpc83xx_setup_arch();

#ifdef CONFIG_QUICC_ENGINE
	np = of_find_node_by_name(NULL, "par_io");
	if (np != NULL) {
		par_io_init(np);
		of_node_put(np);

		for_each_node_by_name(np, "spi")
			par_io_of_config(np);

		for_each_node_by_name(np, "ucc")
			par_io_of_config(np);

		/* Only apply this quirk when par_io is available */
		np = of_find_compatible_node(NULL, "network", "ucc_geth");
		if (np != NULL) {
			quirk_mpc8360e_qe_enet10();
			of_node_put(np);
		}
	}
#endif	/* CONFIG_QUICC_ENGINE */
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
Gerlando Falauto
94
89.52%
2
50.00%
Heiko Schocher
10
9.52%
1
25.00%
Kevin Hao
1
0.95%
1
25.00%
Total
105
100.00%
4
100.00%

machine_device_initcall(mpc83xx_km, mpc83xx_declare_of_platform_devices);

/* list of the supported boards */

static char *board[] __initdata = {
	"Keymile,KMETER1",
	"Keymile,kmpbec8321",
	NULL
};

/*
 * Called very early, MMU is off, device-tree isn't unflattened
 */


static int __init mpc83xx_km_probe(void)
{
	int i = 0;

	while (board[i]) {
		if (of_machine_is_compatible(board[i]))
			break;
		i++;
	}
	return (board[i] != NULL);
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
Holger Brunck
35
74.47%
1
33.33%
Heiko Schocher
11
23.40%
1
33.33%
Benjamin Herrenschmidt
1
2.13%
1
33.33%
Total
47
100.00%
3
100.00%


define_machine(mpc83xx_km) 
{
	.name		= "mpc83xx-km-platform",
	.probe		= mpc83xx_km_probe,
	.setup_arch	= mpc83xx_km_setup_arch,
	.init_IRQ	= mpc83xx_ipic_and_qe_init_IRQ,
	.get_irq	= ipic_get_irq,
	.restart	= mpc83xx_restart,
	.time_init	= mpc83xx_time_init,
	.calibrate_decr	= generic_calibrate_decr,
	.progress	= udbg_progress,
};
Overall Contributors
Person
Tokens
Prop
Commits
CommitProp
Heiko Schocher
281
52.23%
1
8.33%
Gerlando Falauto
104
19.33%
2
16.67%
Christian Herzig
86
15.99%
1
8.33%
Holger Brunck
60
11.15%
2
16.67%
Zhao Qiang
2
0.37%
1
8.33%
Dmitry Baryshkov
2
0.37%
2
16.67%
Benjamin Herrenschmidt
1
0.19%
1
8.33%
Kevin Hao
1
0.19%
1
8.33%
Arun Sharma
1
0.19%
1
8.33%
Total
538
100.00%
12
100.00%
Directory: arch/powerpc/platforms/83xx

Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.