Release 4.14 arch/powerpc/platforms/85xx/t1042rdb_diu.c
/*
* T1042 platform DIU operation
*
* Copyright 2014 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <sysdev/fsl_soc.h>
/*DIU Pixel ClockCR offset in scfg*/
#define CCSR_SCFG_PIXCLKCR 0x28
/* DIU Pixel Clock bits of the PIXCLKCR */
#define PIXCLKCR_PXCKEN 0x80000000
#define PIXCLKCR_PXCKINV 0x40000000
#define PIXCLKCR_PXCKDLY 0x0000FF00
#define PIXCLKCR_PXCLK_MASK 0x00FF0000
/* Some CPLD register definitions */
#define CPLD_DIUCSR 0x16
#define CPLD_DIUCSR_DVIEN 0x80
#define CPLD_DIUCSR_BACKLIGHT 0x0f
struct device_node *cpld_node;
/**
* t1042rdb_set_monitor_port: switch the output to a different monitor port
*/
static void t1042rdb_set_monitor_port(enum fsl_diu_monitor_port port)
{
static void __iomem *cpld_base;
cpld_base = of_iomap(cpld_node, 0);
if (!cpld_base) {
pr_err("%s: Could not map cpld registers\n", __func__);
goto exit;
}
switch (port) {
case FSL_DIU_PORT_DVI:
/* Enable the DVI(HDMI) port, disable the DFP and
* the backlight
*/
clrbits8(cpld_base + CPLD_DIUCSR, CPLD_DIUCSR_DVIEN);
break;
case FSL_DIU_PORT_LVDS:
/*
* LVDS also needs backlight enabled, otherwise the display
* will be blank.
*/
/* Enable the DFP port, disable the DVI*/
setbits8(cpld_base + CPLD_DIUCSR, 0x01 << 8);
setbits8(cpld_base + CPLD_DIUCSR, 0x01 << 4);
setbits8(cpld_base + CPLD_DIUCSR, CPLD_DIUCSR_BACKLIGHT);
break;
default:
pr_err("%s: Unsupported monitor port %i\n", __func__, port);
}
iounmap(cpld_base);
exit:
of_node_put(cpld_node);
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Jason Jin | 121 | 100.00% | 1 | 100.00% |
| Total | 121 | 100.00% | 1 | 100.00% |
/**
* t1042rdb_set_pixel_clock: program the DIU's clock
* @pixclock: pixel clock in ps (pico seconds)
*/
static void t1042rdb_set_pixel_clock(unsigned int pixclock)
{
struct device_node *scfg_np;
void __iomem *scfg;
unsigned long freq;
u64 temp;
u32 pxclk;
scfg_np = of_find_compatible_node(NULL, NULL, "fsl,t1040-scfg");
if (!scfg_np) {
pr_err("%s: Missing scfg node. Can not display video.\n",
__func__);
return;
}
scfg = of_iomap(scfg_np, 0);
of_node_put(scfg_np);
if (!scfg) {
pr_err("%s: Could not map device. Can not display video.\n",
__func__);
return;
}
/* Convert pixclock into frequency */
temp = 1000000000000ULL;
do_div(temp, pixclock);
freq = temp;
/*
* 'pxclk' is the ratio of the platform clock to the pixel clock.
* This number is programmed into the PIXCLKCR register, and the valid
* range of values is 2-255.
*/
pxclk = DIV_ROUND_CLOSEST(fsl_get_sys_freq(), freq);
pxclk = clamp_t(u32, pxclk, 2, 255);
/* Disable the pixel clock, and set it to non-inverted and no delay */
clrbits32(scfg + CCSR_SCFG_PIXCLKCR,
PIXCLKCR_PXCKEN | PIXCLKCR_PXCKDLY | PIXCLKCR_PXCLK_MASK);
/* Enable the clock and set the pxclk */
setbits32(scfg + CCSR_SCFG_PIXCLKCR, PIXCLKCR_PXCKEN | (pxclk << 16));
iounmap(scfg);
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Jason Jin | 160 | 100.00% | 1 | 100.00% |
| Total | 160 | 100.00% | 1 | 100.00% |
/**
* t1042rdb_valid_monitor_port: set the monitor port for sysfs
*/
static enum fsl_diu_monitor_port
t1042rdb_valid_monitor_port(enum fsl_diu_monitor_port port)
{
switch (port) {
case FSL_DIU_PORT_DVI:
case FSL_DIU_PORT_LVDS:
return port;
default:
return FSL_DIU_PORT_DVI; /* Dual-link LVDS is not supported */
}
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Jason Jin | 31 | 100.00% | 1 | 100.00% |
| Total | 31 | 100.00% | 1 | 100.00% |
static int __init t1042rdb_diu_init(void)
{
cpld_node = of_find_compatible_node(NULL, NULL, "fsl,t1042rdb-cpld");
if (!cpld_node)
return 0;
diu_ops.set_monitor_port = t1042rdb_set_monitor_port;
diu_ops.set_pixel_clock = t1042rdb_set_pixel_clock;
diu_ops.valid_monitor_port = t1042rdb_valid_monitor_port;
return 0;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Jason Jin | 49 | 100.00% | 1 | 100.00% |
| Total | 49 | 100.00% | 1 | 100.00% |
early_initcall(t1042rdb_diu_init);
Overall Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Jason Jin | 425 | 100.00% | 1 | 100.00% |
| Total | 425 | 100.00% | 1 | 100.00% |
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.