cregit-Linux how code gets into the kernel

Release 4.14 arch/powerpc/platforms/86xx/gef_ppc9a.c

/*
 * GE PPC9A board support
 *
 * Author: Martyn Welch <martyn.welch@ge.com>
 *
 * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc.
 *
 * This program is free software; you can redistribute  it and/or modify it
 * under  the terms of  the GNU General  Public License as published by the
 * Free Software Foundation;  either version 2 of the  License, or (at your
 * option) any later version.
 *
 * Based on: mpc86xx_hpcn.c (MPC86xx HPCN board specific routines)
 * Copyright 2006 Freescale Semiconductor Inc.
 *
 * NEC fixup adapted from arch/mips/pci/fixup-lm2e.c
 */

#include <linux/stddef.h>
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/kdev_t.h>
#include <linux/delay.h>
#include <linux/seq_file.h>
#include <linux/of_platform.h>

#include <asm/time.h>
#include <asm/machdep.h>
#include <asm/pci-bridge.h>
#include <asm/prom.h>
#include <mm/mmu_decl.h>
#include <asm/udbg.h>

#include <asm/mpic.h>
#include <asm/nvram.h>

#include <sysdev/fsl_pci.h>
#include <sysdev/fsl_soc.h>
#include <sysdev/ge/ge_pic.h>

#include "mpc86xx.h"


#undef DEBUG

#ifdef DEBUG

#define DBG (fmt...) do { printk(KERN_ERR "PPC9A: " fmt); } while (0)
#else

#define DBG (fmt...) do { } while (0)
#endif


void __iomem *ppc9a_regs;


static void __init gef_ppc9a_init_irq(void) { struct device_node *cascade_node = NULL; mpc86xx_init_irq(); /* * There is a simple interrupt handler in the main FPGA, this needs * to be cascaded into the MPIC */ cascade_node = of_find_compatible_node(NULL, NULL, "gef,fpga-pic-1.00"); if (!cascade_node) { printk(KERN_WARNING "PPC9A: No FPGA PIC\n"); return; } gef_pic_init(cascade_node); of_node_put(cascade_node); }

Contributors

PersonTokensPropCommitsCommitProp
Martyn Welch55100.00%1100.00%
Total55100.00%1100.00%


static void __init gef_ppc9a_setup_arch(void) { struct device_node *regs; printk(KERN_INFO "GE Intelligent Platforms PPC9A 6U VME SBC\n"); #ifdef CONFIG_SMP mpc86xx_smp_init(); #endif fsl_pci_assign_primary(); /* Remap basic board registers */ regs = of_find_compatible_node(NULL, NULL, "gef,ppc9a-fpga-regs"); if (regs) { ppc9a_regs = of_iomap(regs, 0); if (ppc9a_regs == NULL) printk(KERN_WARNING "Unable to map board registers\n"); of_node_put(regs); } #if defined(CONFIG_MMIO_NVRAM) mmio_nvram_init(); #endif }

Contributors

PersonTokensPropCommitsCommitProp
Martyn Welch8396.51%375.00%
Jia Hongtao33.49%125.00%
Total86100.00%4100.00%

/* Return the PCB revision */
static unsigned int gef_ppc9a_get_pcb_rev(void) { unsigned int reg; reg = ioread32be(ppc9a_regs); return (reg >> 16) & 0xff; }

Contributors

PersonTokensPropCommitsCommitProp
Martyn Welch29100.00%2100.00%
Total29100.00%2100.00%

/* Return the board (software) revision */
static unsigned int gef_ppc9a_get_board_rev(void) { unsigned int reg; reg = ioread32be(ppc9a_regs); return (reg >> 8) & 0xff; }

Contributors

PersonTokensPropCommitsCommitProp
Martyn Welch29100.00%2100.00%
Total29100.00%2100.00%

/* Return the FPGA revision */
static unsigned int gef_ppc9a_get_fpga_rev(void) { unsigned int reg; reg = ioread32be(ppc9a_regs); return reg & 0xf; }

Contributors

PersonTokensPropCommitsCommitProp
Martyn Welch25100.00%2100.00%
Total25100.00%2100.00%

/* Return VME Geographical Address */
static unsigned int gef_ppc9a_get_vme_geo_addr(void) { unsigned int reg; reg = ioread32be(ppc9a_regs + 0x4); return reg & 0x1f; }

Contributors

PersonTokensPropCommitsCommitProp
Martyn Welch27100.00%1100.00%
Total27100.00%1100.00%

/* Return VME System Controller Status */
static unsigned int gef_ppc9a_get_vme_is_syscon(void) { unsigned int reg; reg = ioread32be(ppc9a_regs + 0x4); return (reg >> 9) & 0x1; }

Contributors

PersonTokensPropCommitsCommitProp
Martyn Welch31100.00%2100.00%
Total31100.00%2100.00%


static void gef_ppc9a_show_cpuinfo(struct seq_file *m) { uint svid = mfspr(SPRN_SVR); seq_printf(m, "Vendor\t\t: GE Intelligent Platforms\n"); seq_printf(m, "Revision\t: %u%c\n", gef_ppc9a_get_pcb_rev(), ('A' + gef_ppc9a_get_board_rev())); seq_printf(m, "FPGA Revision\t: %u\n", gef_ppc9a_get_fpga_rev()); seq_printf(m, "SVR\t\t: 0x%x\n", svid); seq_printf(m, "VME geo. addr\t: %u\n", gef_ppc9a_get_vme_geo_addr()); seq_printf(m, "VME syscon\t: %s\n", gef_ppc9a_get_vme_is_syscon() ? "yes" : "no"); }

Contributors

PersonTokensPropCommitsCommitProp
Martyn Welch86100.00%3100.00%
Total86100.00%3100.00%


static void gef_ppc9a_nec_fixup(struct pci_dev *pdev) { unsigned int val; /* Do not do the fixup on other platforms! */ if (!machine_is(gef_ppc9a)) return; printk(KERN_INFO "Running NEC uPD720101 Fixup\n"); /* Ensure ports 1, 2, 3, 4 & 5 are enabled */ pci_read_config_dword(pdev, 0xe0, &val); pci_write_config_dword(pdev, 0xe0, (val & ~7) | 0x5); /* System clock is 48-MHz Oscillator and EHCI Enabled. */ pci_write_config_dword(pdev, 0xe4, 1 << 5); }

Contributors

PersonTokensPropCommitsCommitProp
Martyn Welch70100.00%1100.00%
Total70100.00%1100.00%

DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_USB, gef_ppc9a_nec_fixup); /* * Called very early, device-tree isn't unflattened * * This function is called to determine whether the BSP is compatible with the * supplied device-tree, which is assumed to be the correct one for the actual * board. It is expected thati, in the future, a kernel may support multiple * boards. */
static int __init gef_ppc9a_probe(void) { if (of_machine_is_compatible("gef,ppc9a")) return 1; return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Martyn Welch2195.45%150.00%
Benjamin Herrenschmidt14.55%150.00%
Total22100.00%2100.00%

machine_arch_initcall(gef_ppc9a, mpc86xx_common_publish_devices); define_machine(gef_ppc9a) { .name = "GE PPC9A", .probe = gef_ppc9a_probe, .setup_arch = gef_ppc9a_setup_arch, .init_IRQ = gef_ppc9a_init_irq, .show_cpuinfo = gef_ppc9a_show_cpuinfo, .get_irq = mpic_get_irq, .time_init = mpc86xx_time_init, .calibrate_decr = generic_calibrate_decr, .progress = udbg_progress, #ifdef CONFIG_PCI .pcibios_fixup_bus = fsl_pcibios_fixup_bus, #endif };

Overall Contributors

PersonTokensPropCommitsCommitProp
Martyn Welch61999.04%562.50%
Jia Hongtao40.64%112.50%
Benjamin Herrenschmidt10.16%112.50%
Alessio Igor Bogani10.16%112.50%
Total625100.00%8100.00%
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with cregit.