Release 4.14 arch/x86/include/asm/percpu.h
/* SPDX-License-Identifier: GPL-2.0 */
#ifndef _ASM_X86_PERCPU_H
#define _ASM_X86_PERCPU_H
#ifdef CONFIG_X86_64
#define __percpu_seg gs
#define __percpu_mov_op movq
#else
#define __percpu_seg fs
#define __percpu_mov_op movl
#endif
#ifdef __ASSEMBLY__
/*
* PER_CPU finds an address of a per-cpu variable.
*
* Args:
* var - variable name
* reg - 32bit register
*
* The resulting address is stored in the "reg" argument.
*
* Example:
* PER_CPU(cpu_gdt_descr, %ebx)
*/
#ifdef CONFIG_SMP
#define PER_CPU(var, reg) \
__percpu_mov_op %__percpu_seg:this_cpu_off, reg; \
lea var(reg), reg
#define PER_CPU_VAR(var) %__percpu_seg:var
#else /* ! SMP */
#define PER_CPU(var, reg) __percpu_mov_op $var, reg
#define PER_CPU_VAR(var) var
#endif /* SMP */
#ifdef CONFIG_X86_64_SMP
#define INIT_PER_CPU_VAR(var) init_per_cpu__##var
#else
#define INIT_PER_CPU_VAR(var) var
#endif
#else /* ...!ASSEMBLY */
#include <linux/kernel.h>
#include <linux/stringify.h>
#ifdef CONFIG_SMP
#define __percpu_prefix "%%"__stringify(__percpu_seg)":"
#define __my_cpu_offset this_cpu_read(this_cpu_off)
/*
* Compared to the generic __my_cpu_offset version, the following
* saves one instruction and avoids clobbering a temp register.
*/
#define arch_raw_cpu_ptr(ptr) \
({ \
unsigned long tcp_ptr__; \
asm volatile("add " __percpu_arg(1) ", %0" \
: "=r" (tcp_ptr__) \
: "m" (this_cpu_off), "0" (ptr)); \
(typeof(*(ptr)) __kernel __force *)tcp_ptr__; \
})
#else
#define __percpu_prefix ""
#endif
#define __percpu_arg(x) __percpu_prefix "%" #x
/*
* Initialized pointers to per-cpu variables needed for the boot
* processor need to use these macros to get the proper address
* offset from __per_cpu_load on SMP.
*
* There also must be an entry in vmlinux_64.lds.S
*/
#define DECLARE_INIT_PER_CPU(var) \
extern typeof(var) init_per_cpu_var(var)
#ifdef CONFIG_X86_64_SMP
#define init_per_cpu_var(var) init_per_cpu__##var
#else
#define init_per_cpu_var(var) var
#endif
/* For arch-specific code, we can use direct single-insn ops (they
* don't give an lvalue though). */
extern void __bad_percpu_size(void);
#define percpu_to_op(op, var, val) \
do { \
typedef typeof(var) pto_T__; \
if (0) { \
pto_T__ pto_tmp__; \
pto_tmp__ = (val); \
(void)pto_tmp__; \
} \
switch (sizeof(var)) { \
case 1: \
asm(op "b %1,"__percpu_arg(0) \
: "+m" (var) \
: "qi" ((pto_T__)(val))); \
break; \
case 2: \
asm(op "w %1,"__percpu_arg(0) \
: "+m" (var) \
: "ri" ((pto_T__)(val))); \
break; \
case 4: \
asm(op "l %1,"__percpu_arg(0) \
: "+m" (var) \
: "ri" ((pto_T__)(val))); \
break; \
case 8: \
asm(op "q %1,"__percpu_arg(0) \
: "+m" (var) \
: "re" ((pto_T__)(val))); \
break; \
default: __bad_percpu_size(); \
} \
} while (0)
/*
* Generate a percpu add to memory instruction and optimize code
* if one is added or subtracted.
*/
#define percpu_add_op(var, val) \
do { \
typedef typeof(var) pao_T__; \
const int pao_ID__ = (__builtin_constant_p(val) && \
((val) == 1 || (val) == -1)) ? \
(int)(val) : 0; \
if (0) { \
pao_T__ pao_tmp__; \
pao_tmp__ = (val); \
(void)pao_tmp__; \
} \
switch (sizeof(var)) { \
case 1: \
if (pao_ID__ == 1) \
asm("incb "__percpu_arg(0) : "+m" (var)); \
else if (pao_ID__ == -1) \
asm("decb "__percpu_arg(0) : "+m" (var)); \
else \
asm("addb %1, "__percpu_arg(0) \
: "+m" (var) \
: "qi" ((pao_T__)(val))); \
break; \
case 2: \
if (pao_ID__ == 1) \
asm("incw "__percpu_arg(0) : "+m" (var)); \
else if (pao_ID__ == -1) \
asm("decw "__percpu_arg(0) : "+m" (var)); \
else \
asm("addw %1, "__percpu_arg(0) \
: "+m" (var) \
: "ri" ((pao_T__)(val))); \
break; \
case 4: \
if (pao_ID__ == 1) \
asm("incl "__percpu_arg(0) : "+m" (var)); \
else if (pao_ID__ == -1) \
asm("decl "__percpu_arg(0) : "+m" (var)); \
else \
asm("addl %1, "__percpu_arg(0) \
: "+m" (var) \
: "ri" ((pao_T__)(val))); \
break; \
case 8: \
if (pao_ID__ == 1) \
asm("incq "__percpu_arg(0) : "+m" (var)); \
else if (pao_ID__ == -1) \
asm("decq "__percpu_arg(0) : "+m" (var)); \
else \
asm("addq %1, "__percpu_arg(0) \
: "+m" (var) \
: "re" ((pao_T__)(val))); \
break; \
default: __bad_percpu_size(); \
} \
} while (0)
#define percpu_from_op(op, var) \
({ \
typeof(var) pfo_ret__; \
switch (sizeof(var)) { \
case 1: \
asm(op "b "__percpu_arg(1)",%0" \
: "=q" (pfo_ret__) \
: "m" (var)); \
break; \
case 2: \
asm(op "w "__percpu_arg(1)",%0" \
: "=r" (pfo_ret__) \
: "m" (var)); \
break; \
case 4: \
asm(op "l "__percpu_arg(1)",%0" \
: "=r" (pfo_ret__) \
: "m" (var)); \
break; \
case 8: \
asm(op "q "__percpu_arg(1)",%0" \
: "=r" (pfo_ret__) \
: "m" (var)); \
break; \
default: __bad_percpu_size(); \
} \
pfo_ret__; \
})
#define percpu_stable_op(op, var) \
({ \
typeof(var) pfo_ret__; \
switch (sizeof(var)) { \
case 1: \
asm(op "b "__percpu_arg(P1)",%0" \
: "=q" (pfo_ret__) \
: "p" (&(var))); \
break; \
case 2: \
asm(op "w "__percpu_arg(P1)",%0" \
: "=r" (pfo_ret__) \
: "p" (&(var))); \
break; \
case 4: \
asm(op "l "__percpu_arg(P1)",%0" \
: "=r" (pfo_ret__) \
: "p" (&(var))); \
break; \
case 8: \
asm(op "q "__percpu_arg(P1)",%0" \
: "=r" (pfo_ret__) \
: "p" (&(var))); \
break; \
default: __bad_percpu_size(); \
} \
pfo_ret__; \
})
#define percpu_unary_op(op, var) \
({ \
switch (sizeof(var)) { \
case 1: \
asm(op "b "__percpu_arg(0) \
: "+m" (var)); \
break; \
case 2: \
asm(op "w "__percpu_arg(0) \
: "+m" (var)); \
break; \
case 4: \
asm(op "l "__percpu_arg(0) \
: "+m" (var)); \
break; \
case 8: \
asm(op "q "__percpu_arg(0) \
: "+m" (var)); \
break; \
default: __bad_percpu_size(); \
} \
})
/*
* Add return operation
*/
#define percpu_add_return_op(var, val) \
({ \
typeof(var) paro_ret__ = val; \
switch (sizeof(var)) { \
case 1: \
asm("xaddb %0, "__percpu_arg(1) \
: "+q" (paro_ret__), "+m" (var) \
: : "memory"); \
break; \
case 2: \
asm("xaddw %0, "__percpu_arg(1) \
: "+r" (paro_ret__), "+m" (var) \
: : "memory"); \
break; \
case 4: \
asm("xaddl %0, "__percpu_arg(1) \
: "+r" (paro_ret__), "+m" (var) \
: : "memory"); \
break; \
case 8: \
asm("xaddq %0, "__percpu_arg(1) \
: "+re" (paro_ret__), "+m" (var) \
: : "memory"); \
break; \
default: __bad_percpu_size(); \
} \
paro_ret__ += val; \
paro_ret__; \
})
/*
* xchg is implemented using cmpxchg without a lock prefix. xchg is
* expensive due to the implied lock prefix. The processor cannot prefetch
* cachelines if xchg is used.
*/
#define percpu_xchg_op(var, nval) \
({ \
typeof(var) pxo_ret__; \
typeof(var) pxo_new__ = (nval); \
switch (sizeof(var)) { \
case 1: \
asm("\n\tmov "__percpu_arg(1)",%%al" \
"\n1:\tcmpxchgb %2, "__percpu_arg(1) \
"\n\tjnz 1b" \
: "=&a" (pxo_ret__), "+m" (var) \
: "q" (pxo_new__) \
: "memory"); \
break; \
case 2: \
asm("\n\tmov "__percpu_arg(1)",%%ax" \
"\n1:\tcmpxchgw %2, "__percpu_arg(1) \
"\n\tjnz 1b" \
: "=&a" (pxo_ret__), "+m" (var) \
: "r" (pxo_new__) \
: "memory"); \
break; \
case 4: \
asm("\n\tmov "__percpu_arg(1)",%%eax" \
"\n1:\tcmpxchgl %2, "__percpu_arg(1) \
"\n\tjnz 1b" \
: "=&a" (pxo_ret__), "+m" (var) \
: "r" (pxo_new__) \
: "memory"); \
break; \
case 8: \
asm("\n\tmov "__percpu_arg(1)",%%rax" \
"\n1:\tcmpxchgq %2, "__percpu_arg(1) \
"\n\tjnz 1b" \
: "=&a" (pxo_ret__), "+m" (var) \
: "r" (pxo_new__) \
: "memory"); \
break; \
default: __bad_percpu_size(); \
} \
pxo_ret__; \
})
/*
* cmpxchg has no such implied lock semantics as a result it is much
* more efficient for cpu local operations.
*/
#define percpu_cmpxchg_op(var, oval, nval) \
({ \
typeof(var) pco_ret__; \
typeof(var) pco_old__ = (oval); \
typeof(var) pco_new__ = (nval); \
switch (sizeof(var)) { \
case 1: \
asm("cmpxchgb %2, "__percpu_arg(1) \
: "=a" (pco_ret__), "+m" (var) \
: "q" (pco_new__), "0" (pco_old__) \
: "memory"); \
break; \
case 2: \
asm("cmpxchgw %2, "__percpu_arg(1) \
: "=a" (pco_ret__), "+m" (var) \
: "r" (pco_new__), "0" (pco_old__) \
: "memory"); \
break; \
case 4: \
asm("cmpxchgl %2, "__percpu_arg(1) \
: "=a" (pco_ret__), "+m" (var) \
: "r" (pco_new__), "0" (pco_old__) \
: "memory"); \
break; \
case 8: \
asm("cmpxchgq %2, "__percpu_arg(1) \
: "=a" (pco_ret__), "+m" (var) \
: "r" (pco_new__), "0" (pco_old__) \
: "memory"); \
break; \
default: __bad_percpu_size(); \
} \
pco_ret__; \
})
/*
* this_cpu_read() makes gcc load the percpu variable every time it is
* accessed while this_cpu_read_stable() allows the value to be cached.
* this_cpu_read_stable() is more efficient and can be used if its value
* is guaranteed to be valid across cpus. The current users include
* get_current() and get_thread_info() both of which are actually
* per-thread variables implemented as per-cpu variables and thus
* stable for the duration of the respective task.
*/
#define this_cpu_read_stable(var) percpu_stable_op("mov", var)
#define raw_cpu_read_1(pcp) percpu_from_op("mov", pcp)
#define raw_cpu_read_2(pcp) percpu_from_op("mov", pcp)
#define raw_cpu_read_4(pcp) percpu_from_op("mov", pcp)
#define raw_cpu_write_1(pcp, val) percpu_to_op("mov", (pcp), val)
#define raw_cpu_write_2(pcp, val) percpu_to_op("mov", (pcp), val)
#define raw_cpu_write_4(pcp, val) percpu_to_op("mov", (pcp), val)
#define raw_cpu_add_1(pcp, val) percpu_add_op((pcp), val)
#define raw_cpu_add_2(pcp, val) percpu_add_op((pcp), val)
#define raw_cpu_add_4(pcp, val) percpu_add_op((pcp), val)
#define raw_cpu_and_1(pcp, val) percpu_to_op("and", (pcp), val)
#define raw_cpu_and_2(pcp, val) percpu_to_op("and", (pcp), val)
#define raw_cpu_and_4(pcp, val) percpu_to_op("and", (pcp), val)
#define raw_cpu_or_1(pcp, val) percpu_to_op("or", (pcp), val)
#define raw_cpu_or_2(pcp, val) percpu_to_op("or", (pcp), val)
#define raw_cpu_or_4(pcp, val) percpu_to_op("or", (pcp), val)
#define raw_cpu_xchg_1(pcp, val) percpu_xchg_op(pcp, val)
#define raw_cpu_xchg_2(pcp, val) percpu_xchg_op(pcp, val)
#define raw_cpu_xchg_4(pcp, val) percpu_xchg_op(pcp, val)
#define this_cpu_read_1(pcp) percpu_from_op("mov", pcp)
#define this_cpu_read_2(pcp) percpu_from_op("mov", pcp)
#define this_cpu_read_4(pcp) percpu_from_op("mov", pcp)
#define this_cpu_write_1(pcp, val) percpu_to_op("mov", (pcp), val)
#define this_cpu_write_2(pcp, val) percpu_to_op("mov", (pcp), val)
#define this_cpu_write_4(pcp, val) percpu_to_op("mov", (pcp), val)
#define this_cpu_add_1(pcp, val) percpu_add_op((pcp), val)
#define this_cpu_add_2(pcp, val) percpu_add_op((pcp), val)
#define this_cpu_add_4(pcp, val) percpu_add_op((pcp), val)
#define this_cpu_and_1(pcp, val) percpu_to_op("and", (pcp), val)
#define this_cpu_and_2(pcp, val) percpu_to_op("and", (pcp), val)
#define this_cpu_and_4(pcp, val) percpu_to_op("and", (pcp), val)
#define this_cpu_or_1(pcp, val) percpu_to_op("or", (pcp), val)
#define this_cpu_or_2(pcp, val) percpu_to_op("or", (pcp), val)
#define this_cpu_or_4(pcp, val) percpu_to_op("or", (pcp), val)
#define this_cpu_xchg_1(pcp, nval) percpu_xchg_op(pcp, nval)
#define this_cpu_xchg_2(pcp, nval) percpu_xchg_op(pcp, nval)
#define this_cpu_xchg_4(pcp, nval) percpu_xchg_op(pcp, nval)
#define raw_cpu_add_return_1(pcp, val) percpu_add_return_op(pcp, val)
#define raw_cpu_add_return_2(pcp, val) percpu_add_return_op(pcp, val)
#define raw_cpu_add_return_4(pcp, val) percpu_add_return_op(pcp, val)
#define raw_cpu_cmpxchg_1(pcp, oval, nval) percpu_cmpxchg_op(pcp, oval, nval)
#define raw_cpu_cmpxchg_2(pcp, oval, nval) percpu_cmpxchg_op(pcp, oval, nval)
#define raw_cpu_cmpxchg_4(pcp, oval, nval) percpu_cmpxchg_op(pcp, oval, nval)
#define this_cpu_add_return_1(pcp, val) percpu_add_return_op(pcp, val)
#define this_cpu_add_return_2(pcp, val) percpu_add_return_op(pcp, val)
#define this_cpu_add_return_4(pcp, val) percpu_add_return_op(pcp, val)
#define this_cpu_cmpxchg_1(pcp, oval, nval) percpu_cmpxchg_op(pcp, oval, nval)
#define this_cpu_cmpxchg_2(pcp, oval, nval) percpu_cmpxchg_op(pcp, oval, nval)
#define this_cpu_cmpxchg_4(pcp, oval, nval) percpu_cmpxchg_op(pcp, oval, nval)
#ifdef CONFIG_X86_CMPXCHG64
#define percpu_cmpxchg8b_double(pcp1, pcp2, o1, o2, n1, n2) \
({ \
bool __ret; \
typeof(pcp1) __o1 = (o1), __n1 = (n1); \
typeof(pcp2) __o2 = (o2), __n2 = (n2); \
asm volatile("cmpxchg8b "__percpu_arg(1)"\n\tsetz %0\n\t" \
: "=a" (__ret), "+m" (pcp1), "+m" (pcp2), "+d" (__o2) \
: "b" (__n1), "c" (__n2), "a" (__o1)); \
__ret; \
})
#define raw_cpu_cmpxchg_double_4 percpu_cmpxchg8b_double
#define this_cpu_cmpxchg_double_4 percpu_cmpxchg8b_double
#endif /* CONFIG_X86_CMPXCHG64 */
/*
* Per cpu atomic 64 bit operations are only available under 64 bit.
* 32 bit must fall back to generic operations.
*/
#ifdef CONFIG_X86_64
#define raw_cpu_read_8(pcp) percpu_from_op("mov", pcp)
#define raw_cpu_write_8(pcp, val) percpu_to_op("mov", (pcp), val)
#define raw_cpu_add_8(pcp, val) percpu_add_op((pcp), val)
#define raw_cpu_and_8(pcp, val) percpu_to_op("and", (pcp), val)
#define raw_cpu_or_8(pcp, val) percpu_to_op("or", (pcp), val)
#define raw_cpu_add_return_8(pcp, val) percpu_add_return_op(pcp, val)
#define raw_cpu_xchg_8(pcp, nval) percpu_xchg_op(pcp, nval)
#define raw_cpu_cmpxchg_8(pcp, oval, nval) percpu_cmpxchg_op(pcp, oval, nval)
#define this_cpu_read_8(pcp) percpu_from_op("mov", pcp)
#define this_cpu_write_8(pcp, val) percpu_to_op("mov", (pcp), val)
#define this_cpu_add_8(pcp, val) percpu_add_op((pcp), val)
#define this_cpu_and_8(pcp, val) percpu_to_op("and", (pcp), val)
#define this_cpu_or_8(pcp, val) percpu_to_op("or", (pcp), val)
#define this_cpu_add_return_8(pcp, val) percpu_add_return_op(pcp, val)
#define this_cpu_xchg_8(pcp, nval) percpu_xchg_op(pcp, nval)
#define this_cpu_cmpxchg_8(pcp, oval, nval) percpu_cmpxchg_op(pcp, oval, nval)
/*
* Pretty complex macro to generate cmpxchg16 instruction. The instruction
* is not supported on early AMD64 processors so we must be able to emulate
* it in software. The address used in the cmpxchg16 instruction must be
* aligned to a 16 byte boundary.
*/
#define percpu_cmpxchg16b_double(pcp1, pcp2, o1, o2, n1, n2) \
({ \
bool __ret; \
typeof(pcp1) __o1 = (o1), __n1 = (n1); \
typeof(pcp2) __o2 = (o2), __n2 = (n2); \
alternative_io("leaq %P1,%%rsi\n\tcall this_cpu_cmpxchg16b_emu\n\t", \
"cmpxchg16b " __percpu_arg(1) "\n\tsetz %0\n\t", \
X86_FEATURE_CX16, \
ASM_OUTPUT2("=a" (__ret), "+m" (pcp1), \
"+m" (pcp2), "+d" (__o2)), \
"b" (__n1), "c" (__n2), "a" (__o1) : "rsi"); \
__ret; \
})
#define raw_cpu_cmpxchg_double_8 percpu_cmpxchg16b_double
#define this_cpu_cmpxchg_double_8 percpu_cmpxchg16b_double
#endif
static __always_inline bool x86_this_cpu_constant_test_bit(unsigned int nr,
const unsigned long __percpu *addr)
{
unsigned long __percpu *a =
(unsigned long __percpu *)addr + nr / BITS_PER_LONG;
#ifdef CONFIG_X86_64
return ((1UL << (nr % BITS_PER_LONG)) & raw_cpu_read_8(*a)) != 0;
#else
return ((1UL << (nr % BITS_PER_LONG)) & raw_cpu_read_4(*a)) != 0;
#endif
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Christoph Lameter | 56 | 65.88% | 2 | 40.00% |
| Alex Shi | 27 | 31.76% | 1 | 20.00% |
| Lance Richardson | 1 | 1.18% | 1 | 20.00% |
| H. Peter Anvin | 1 | 1.18% | 1 | 20.00% |
| Total | 85 | 100.00% | 5 | 100.00% |
static inline bool x86_this_cpu_variable_test_bit(int nr,
const unsigned long __percpu *addr)
{
bool oldbit;
asm volatile("bt "__percpu_arg(2)",%1\n\t"
CC_SET(c)
: CC_OUT(c) (oldbit)
: "m" (*(unsigned long __percpu *)addr), "Ir" (nr));
return oldbit;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Christoph Lameter | 23 | 88.46% | 1 | 33.33% |
| H. Peter Anvin | 2 | 7.69% | 1 | 33.33% |
| Lance Richardson | 1 | 3.85% | 1 | 33.33% |
| Total | 26 | 100.00% | 3 | 100.00% |
#define x86_this_cpu_test_bit(nr, addr) \
(__builtin_constant_p((nr)) \
? x86_this_cpu_constant_test_bit((nr), (addr)) \
: x86_this_cpu_variable_test_bit((nr), (addr)))
#include <asm-generic/percpu.h>
/* We can use this directly for local CPU (faster). */
DECLARE_PER_CPU_READ_MOSTLY(unsigned long, this_cpu_off);
#endif /* !__ASSEMBLY__ */
#ifdef CONFIG_SMP
/*
* Define the "EARLY_PER_CPU" macros. These are used for some per_cpu
* variables that are initialized and accessed before there are per_cpu
* areas allocated.
*/
#define DEFINE_EARLY_PER_CPU(_type, _name, _initvalue) \
DEFINE_PER_CPU(_type, _name) = _initvalue; \
__typeof__(_type) _name##_early_map[NR_CPUS] __initdata = \
{ [0 ... NR_CPUS-1] = _initvalue }; \
__typeof__(_type) *_name##_early_ptr __refdata = _name##_early_map
#define DEFINE_EARLY_PER_CPU_READ_MOSTLY(_type, _name, _initvalue) \
DEFINE_PER_CPU_READ_MOSTLY(_type, _name) = _initvalue; \
__typeof__(_type) _name##_early_map[NR_CPUS] __initdata = \
{ [0 ... NR_CPUS-1] = _initvalue }; \
__typeof__(_type) *_name##_early_ptr __refdata = _name##_early_map
#define EXPORT_EARLY_PER_CPU_SYMBOL(_name) \
EXPORT_PER_CPU_SYMBOL(_name)
#define DECLARE_EARLY_PER_CPU(_type, _name) \
DECLARE_PER_CPU(_type, _name); \
extern __typeof__(_type) *_name##_early_ptr; \
extern __typeof__(_type) _name##_early_map[]
#define DECLARE_EARLY_PER_CPU_READ_MOSTLY(_type, _name) \
DECLARE_PER_CPU_READ_MOSTLY(_type, _name); \
extern __typeof__(_type) *_name##_early_ptr; \
extern __typeof__(_type) _name##_early_map[]
#define early_per_cpu_ptr(_name) (_name##_early_ptr)
#define early_per_cpu_map(_name, _idx) (_name##_early_map[_idx])
#define early_per_cpu(_name, _cpu) \
*(early_per_cpu_ptr(_name) ? \
&early_per_cpu_ptr(_name)[_cpu] : \
&per_cpu(_name, _cpu))
#else /* !CONFIG_SMP */
#define DEFINE_EARLY_PER_CPU(_type, _name, _initvalue) \
DEFINE_PER_CPU(_type, _name) = _initvalue
#define DEFINE_EARLY_PER_CPU_READ_MOSTLY(_type, _name, _initvalue) \
DEFINE_PER_CPU_READ_MOSTLY(_type, _name) = _initvalue
#define EXPORT_EARLY_PER_CPU_SYMBOL(_name) \
EXPORT_PER_CPU_SYMBOL(_name)
#define DECLARE_EARLY_PER_CPU(_type, _name) \
DECLARE_PER_CPU(_type, _name)
#define DECLARE_EARLY_PER_CPU_READ_MOSTLY(_type, _name) \
DECLARE_PER_CPU_READ_MOSTLY(_type, _name)
#define early_per_cpu(_name, _cpu) per_cpu(_name, _cpu)
#define early_per_cpu_ptr(_name) NULL
/* no early_per_cpu_map() */
#endif /* !CONFIG_SMP */
#endif /* _ASM_X86_PERCPU_H */
Overall Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Christoph Lameter | 737 | 60.86% | 11 | 26.19% |
| Mike Travis | 210 | 17.34% | 2 | 4.76% |
| Brian Gerst | 55 | 4.54% | 2 | 4.76% |
| Tejun Heo | 51 | 4.21% | 6 | 14.29% |
| Ido Yariv | 44 | 3.63% | 1 | 2.38% |
| Jan Beulich | 41 | 3.39% | 4 | 9.52% |
| Alex Shi | 30 | 2.48% | 2 | 4.76% |
| Ingo Molnar | 10 | 0.83% | 1 | 2.38% |
| Rusty Russell | 7 | 0.58% | 1 | 2.38% |
| H. Peter Anvin | 6 | 0.50% | 2 | 4.76% |
| Linus Torvalds | 6 | 0.50% | 1 | 2.38% |
| Jeremy Fitzhardinge | 4 | 0.33% | 1 | 2.38% |
| Lance Richardson | 2 | 0.17% | 1 | 2.38% |
| Thomas Gleixner | 2 | 0.17% | 1 | 2.38% |
| Justin P. Mattock | 1 | 0.08% | 1 | 2.38% |
| Andi Kleen | 1 | 0.08% | 1 | 2.38% |
| Greg Thelen | 1 | 0.08% | 1 | 2.38% |
| Greg Kroah-Hartman | 1 | 0.08% | 1 | 2.38% |
| Eric Dumazet | 1 | 0.08% | 1 | 2.38% |
| Marcin Ślusarz | 1 | 0.08% | 1 | 2.38% |
| Total | 1211 | 100.00% | 42 | 100.00% |
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.