cregit-Linux how code gets into the kernel

Release 4.14 arch/x86/pci/acpi.c

Directory: arch/x86/pci
// SPDX-License-Identifier: GPL-2.0
#include <linux/pci.h>
#include <linux/acpi.h>
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/dmi.h>
#include <linux/slab.h>
#include <linux/pci-acpi.h>
#include <asm/numa.h>
#include <asm/pci_x86.h>


struct pci_root_info {
	
struct acpi_pci_root_info common;
	
struct pci_sysdata sd;
#ifdef	CONFIG_PCI_MMCONFIG
	
bool mcfg_added;
	
u8 start_bus;
	
u8 end_bus;
#endif
};


static bool pci_use_crs = true;

static bool pci_ignore_seg = false;


static int __init set_use_crs(const struct dmi_system_id *id) { pci_use_crs = true; return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Björn Helgaas20100.00%1100.00%
Total20100.00%1100.00%


static int __init set_nouse_crs(const struct dmi_system_id *id) { pci_use_crs = false; return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Dave Jones20100.00%1100.00%
Total20100.00%1100.00%


static int __init set_ignore_seg(const struct dmi_system_id *id) { printk(KERN_INFO "PCI: %s detected: ignoring ACPI _SEG\n", id->ident); pci_ignore_seg = true; return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Björn Helgaas30100.00%1100.00%
Total30100.00%1100.00%

static const struct dmi_system_id pci_crs_quirks[] __initconst = { /* http://bugzilla.kernel.org/show_bug.cgi?id=14183 */ { .callback = set_use_crs, .ident = "IBM System x3800", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "IBM"), DMI_MATCH(DMI_PRODUCT_NAME, "x3800"), }, }, /* https://bugzilla.kernel.org/show_bug.cgi?id=16007 */ /* 2006 AMD HT/VIA system with two host bridges */ { .callback = set_use_crs, .ident = "ASRock ALiveSATA2-GLAN", .matches = { DMI_MATCH(DMI_PRODUCT_NAME, "ALiveSATA2-GLAN"), }, }, /* https://bugzilla.kernel.org/show_bug.cgi?id=30552 */ /* 2006 AMD HT/VIA system with two host bridges */ { .callback = set_use_crs, .ident = "ASUS M2V-MX SE", .matches = { DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), DMI_MATCH(DMI_BOARD_NAME, "M2V-MX SE"), DMI_MATCH(DMI_BIOS_VENDOR, "American Megatrends Inc."), }, }, /* https://bugzilla.kernel.org/show_bug.cgi?id=42619 */ { .callback = set_use_crs, .ident = "MSI MS-7253", .matches = { DMI_MATCH(DMI_BOARD_VENDOR, "MICRO-STAR INTERNATIONAL CO., LTD"), DMI_MATCH(DMI_BOARD_NAME, "MS-7253"), DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies, LTD"), }, }, /* https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/931368 */ /* https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1033299 */ { .callback = set_use_crs, .ident = "Foxconn K8M890-8237A", .matches = { DMI_MATCH(DMI_BOARD_VENDOR, "Foxconn"), DMI_MATCH(DMI_BOARD_NAME, "K8M890-8237A"), DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies, LTD"), }, }, /* Now for the blacklist.. */ /* https://bugzilla.redhat.com/show_bug.cgi?id=769657 */ { .callback = set_nouse_crs, .ident = "Dell Studio 1557", .matches = { DMI_MATCH(DMI_BOARD_VENDOR, "Dell Inc."), DMI_MATCH(DMI_PRODUCT_NAME, "Studio 1557"), DMI_MATCH(DMI_BIOS_VERSION, "A09"), }, }, /* https://bugzilla.redhat.com/show_bug.cgi?id=769657 */ { .callback = set_nouse_crs, .ident = "Thinkpad SL510", .matches = { DMI_MATCH(DMI_BOARD_VENDOR, "LENOVO"), DMI_MATCH(DMI_BOARD_NAME, "2847DFG"), DMI_MATCH(DMI_BIOS_VERSION, "6JET85WW (1.43 )"), }, }, /* https://bugzilla.kernel.org/show_bug.cgi?id=42606 */ { .callback = set_nouse_crs, .ident = "Supermicro X8DTH", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Supermicro"), DMI_MATCH(DMI_PRODUCT_NAME, "X8DTH-i/6/iF/6F"), DMI_MATCH(DMI_BIOS_VERSION, "2.0a"), }, }, /* https://bugzilla.kernel.org/show_bug.cgi?id=15362 */ { .callback = set_ignore_seg, .ident = "HP xw9300", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), DMI_MATCH(DMI_PRODUCT_NAME, "HP xw9300 Workstation"), }, }, {} };
void __init pci_acpi_crs_quirks(void) { int year; if (dmi_get_date(DMI_BIOS_DATE, &year, NULL, NULL) && year < 2008) { if (iomem_resource.end <= 0xffffffff) pci_use_crs = false; } dmi_check_system(pci_crs_quirks); /* * If the user specifies "pci=use_crs" or "pci=nocrs" explicitly, that * takes precedence over anything we figured out above. */ if (pci_probe & PCI_ROOT_NO_CRS) pci_use_crs = false; else if (pci_probe & PCI_USE__CRS) pci_use_crs = true; printk(KERN_INFO "PCI: %s host bridge windows from ACPI; " "if necessary, use \"pci=%s\" and report a bug\n", pci_use_crs ? "Using" : "Ignoring", pci_use_crs ? "nocrs" : "use_crs"); }

Contributors

PersonTokensPropCommitsCommitProp
Björn Helgaas89100.00%3100.00%
Total89100.00%3100.00%

#ifdef CONFIG_PCI_MMCONFIG
static int check_segment(u16 seg, struct device *dev, char *estr) { if (seg) { dev_err(dev, "%s can't access PCI configuration " "space under this host bridge.\n", estr); return -EIO; } /* * Failure in adding MMCFG information is not fatal, * just can't access extended configuration space of * devices under this host bridge. */ dev_warn(dev, "%s can't access extended PCI configuration " "space under this bridge.\n", estr); return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Jiang Liu52100.00%1100.00%
Total52100.00%1100.00%


static int setup_mcfg_map(struct acpi_pci_root_info *ci) { int result, seg; struct pci_root_info *info; struct acpi_pci_root *root = ci->root; struct device *dev = &ci->bridge->dev; info = container_of(ci, struct pci_root_info, common); info->start_bus = (u8)root->secondary.start; info->end_bus = (u8)root->secondary.end; info->mcfg_added = false; seg = info->sd.domain; /* return success if MMCFG is not in use */ if (raw_pci_ext_ops && raw_pci_ext_ops != &pci_mmcfg) return 0; if (!(pci_probe & PCI_PROBE_MMCONF)) return check_segment(seg, dev, "MMCONFIG is disabled,"); result = pci_mmconfig_insert(dev, seg, info->start_bus, info->end_bus, root->mcfg_addr); if (result == 0) { /* enable MMCFG if it hasn't been enabled yet */ if (raw_pci_ext_ops == NULL) raw_pci_ext_ops = &pci_mmcfg; info->mcfg_added = true; } else if (result != -EEXIST) return check_segment(seg, dev, "fail to add MMCONFIG information,"); return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Jiang Liu194100.00%2100.00%
Total194100.00%2100.00%


static void teardown_mcfg_map(struct acpi_pci_root_info *ci) { struct pci_root_info *info; info = container_of(ci, struct pci_root_info, common); if (info->mcfg_added) { pci_mmconfig_delete(info->sd.domain, info->start_bus, info->end_bus); info->mcfg_added = false; } }

Contributors

PersonTokensPropCommitsCommitProp
Jiang Liu59100.00%2100.00%
Total59100.00%2100.00%

#else
static int setup_mcfg_map(struct acpi_pci_root_info *ci) { return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Jiang Liu14100.00%2100.00%
Total14100.00%2100.00%


static void teardown_mcfg_map(struct acpi_pci_root_info *ci) { }

Contributors

PersonTokensPropCommitsCommitProp
Jiang Liu10100.00%2100.00%
Total10100.00%2100.00%

#endif
static int pci_acpi_root_get_node(struct acpi_pci_root *root) { int busnum = root->secondary.start; struct acpi_device *device = root->device; int node = acpi_get_node(device->handle); if (node == NUMA_NO_NODE) { node = x86_pci_root_bus_node(busnum); if (node != 0 && node != NUMA_NO_NODE) dev_info(&device->dev, FW_BUG "no _PXM; falling back to node %d from hardware (may be inconsistent with ACPI node numbers)\n", node); } if (node != NUMA_NO_NODE && !node_online(node)) node = NUMA_NO_NODE; return node; }

Contributors

PersonTokensPropCommitsCommitProp
Jiang Liu7881.25%240.00%
Björn Helgaas1212.50%240.00%
Gary Hade66.25%120.00%
Total96100.00%5100.00%


static int pci_acpi_root_init_info(struct acpi_pci_root_info *ci) { return setup_mcfg_map(ci); }

Contributors

PersonTokensPropCommitsCommitProp
Jiang Liu1058.82%240.00%
Björn Helgaas529.41%120.00%
Yinghai Lu15.88%120.00%
Mike Yoknis15.88%120.00%
Total17100.00%5100.00%


static void pci_acpi_root_release_info(struct acpi_pci_root_info *ci) { teardown_mcfg_map(ci); kfree(container_of(ci, struct pci_root_info, common)); }

Contributors

PersonTokensPropCommitsCommitProp
Jiang Liu1758.62%266.67%
Yinghai Lu1241.38%133.33%
Total29100.00%3100.00%

/* * An IO port or MMIO resource assigned to a PCI host bridge may be * consumed by the host bridge itself or available to its child * bus/devices. The ACPI specification defines a bit (Producer/Consumer) * to tell whether the resource is consumed by the host bridge itself, * but firmware hasn't used that bit consistently, so we can't rely on it. * * On x86 and IA64 platforms, all IO port and MMIO resources are assumed * to be available to child bus/devices except one special case: * IO port [0xCF8-0xCFF] is consumed by the host bridge itself * to access PCI configuration space. * * So explicitly filter out PCI CFG IO ports[0xCF8-0xCFF]. */
static bool resource_is_pcicfg_ioport(struct resource *res) { return (res->flags & IORESOURCE_IO) && res->start == 0xCF8 && res->end == 0xCFF; }

Contributors

PersonTokensPropCommitsCommitProp
Jiang Liu32100.00%1100.00%
Total32100.00%1100.00%


static int pci_acpi_root_prepare_resources(struct acpi_pci_root_info *ci) { struct acpi_device *device = ci->bridge; int busnum = ci->root->secondary.start; struct resource_entry *entry, *tmp; int status; status = acpi_pci_probe_root_resources(ci); if (pci_use_crs) { resource_list_for_each_entry_safe(entry, tmp, &ci->resources) if (resource_is_pcicfg_ioport(entry->res)) resource_list_destroy_entry(entry); return status; } resource_list_for_each_entry_safe(entry, tmp, &ci->resources) { dev_printk(KERN_DEBUG, &device->dev, "host bridge window %pR (ignored)\n", entry->res); resource_list_destroy_entry(entry); } x86_pci_root_bus_resources(busnum, &ci->resources); return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Jiang Liu9475.81%555.56%
Gary Hade2016.13%111.11%
Mike Yoknis75.65%111.11%
Yinghai Lu32.42%222.22%
Total124100.00%9100.00%

static struct acpi_pci_root_ops acpi_pci_root_ops = { .pci_ops = &pci_root_ops, .init_info = pci_acpi_root_init_info, .release_info = pci_acpi_root_release_info, .prepare_resources = pci_acpi_root_prepare_resources, };
struct pci_bus *pci_acpi_scan_root(struct acpi_pci_root *root) { int domain = root->segment; int busnum = root->secondary.start; int node = pci_acpi_root_get_node(root); struct pci_bus *bus; if (pci_ignore_seg) root->segment = domain = 0; if (domain && !pci_domains_supported) { printk(KERN_WARNING "pci_bus %04x:%02x: " "ignored (multiple domains not supported)\n", domain, busnum); return NULL; } bus = pci_find_bus(domain, busnum); if (bus) { /* * If the desired bus has been scanned already, replace * its bus->sysdata. */ struct pci_sysdata sd = { .domain = domain, .node = node, .companion = root->device }; memcpy(bus->sysdata, &sd, sizeof(sd)); } else { struct pci_root_info *info; info = kzalloc_node(sizeof(*info), GFP_KERNEL, node); if (!info) dev_err(&root->device->dev, "pci_bus %04x:%02x: ignored (out of memory)\n", domain, busnum); else { info->sd.domain = domain; info->sd.node = node; info->sd.companion = root->device; bus = acpi_pci_root_create(root, &acpi_pci_root_ops, &info->common, &info->sd); } } /* After the PCI-E bus has been walked and all devices discovered, * configure any settings of the fabric that might be necessary. */ if (bus) { struct pci_bus *child; list_for_each_entry(child, &bus->children, node) pcie_bus_configure_settings(child); } return bus; }

Contributors

PersonTokensPropCommitsCommitProp
Jiang Liu10943.43%420.00%
Björn Helgaas3614.34%525.00%
Yakui Zhao3011.95%15.00%
Jon Mason259.96%15.00%
Muli Ben-Yehuda197.57%15.00%
Matthew Wilcox124.78%15.00%
Yinghai Lu114.38%525.00%
Andi Kleen72.79%15.00%
Jeff Garzik20.80%15.00%
Total251100.00%20100.00%


int pcibios_root_bridge_prepare(struct pci_host_bridge *bridge) { /* * We pass NULL as parent to pci_create_root_bus(), so if it is not NULL * here, pci_create_root_bus() has been called by someone else and * sysdata is likely to be different from what we expect. Let it go in * that case. */ if (!bridge->dev.parent) { struct pci_sysdata *sd = bridge->bus->sysdata; ACPI_COMPANION_SET(&bridge->dev, sd->companion); } return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Rafael J. Wysocki48100.00%3100.00%
Total48100.00%3100.00%


int __init pci_acpi_init(void) { struct pci_dev *dev = NULL; if (acpi_noirq) return -ENODEV; printk(KERN_INFO "PCI: Using ACPI for IRQ routing\n"); acpi_irq_penalty_init(); pcibios_enable_irq = acpi_pci_irq_enable; pcibios_disable_irq = acpi_pci_irq_disable; x86_init.pci.init_irq = x86_init_noop; if (pci_routeirq) { /* * PCI IRQ routing is set up by pci_enable_device(), but we * also do it here in case there are still broken drivers that * don't use pci_enable_device(). */ printk(KERN_INFO "PCI: Routing PCI interrupts for all devices because \"pci=routeirq\" specified\n"); for_each_pci_dev(dev) acpi_pci_irq_enable(dev); } return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Patrick Mochel2230.14%218.18%
Len Brown1723.29%218.18%
Andrew Morton1317.81%218.18%
Thomas Gleixner1013.70%218.18%
Andy Grover56.85%19.09%
David Shaohua Li45.48%19.09%
Hanna V. Linder22.74%19.09%
Total73100.00%11100.00%


Overall Contributors

PersonTokensPropCommitsCommitProp
Jiang Liu72445.25%711.86%
Björn Helgaas37823.62%1322.03%
Dave Jones996.19%35.08%
Rafael J. Wysocki483.00%35.08%
Jonathan Nieder472.94%11.69%
Paul Menzel402.50%11.69%
Gary Hade352.19%23.39%
Yinghai Lu311.94%610.17%
Patrick Mochel301.88%23.39%
Yakui Zhao301.88%11.69%
Jon Mason251.56%11.69%
Muli Ben-Yehuda191.19%11.69%
Len Brown191.19%23.39%
Andrew Morton130.81%23.39%
Matthew Wilcox120.75%11.69%
Thomas Gleixner100.62%23.39%
Andi Kleen100.62%11.69%
Mike Yoknis80.50%11.69%
Andy Grover50.31%11.69%
David Shaohua Li40.25%11.69%
Tom Rini30.19%11.69%
Tejun Heo30.19%11.69%
Jeff Garzik20.12%11.69%
Hanna V. Linder20.12%11.69%
Nicholas Piggin10.06%11.69%
Greg Kroah-Hartman10.06%11.69%
Jaswinder Singh Rajput10.06%11.69%
Total1600100.00%59100.00%
Directory: arch/x86/pci
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with cregit.