cregit-Linux how code gets into the kernel

Release 4.14 drivers/atm/uPD98401.h

Directory: drivers/atm
/* SPDX-License-Identifier: GPL-2.0 */
/* drivers/atm/uPD98401.h - NEC uPD98401 (SAR) declarations */
 
/* Written 1995 by Werner Almesberger, EPFL LRC */
 

#ifndef DRIVERS_ATM_uPD98401_H

#define DRIVERS_ATM_uPD98401_H



#define MAX_CRAM_SIZE	(1 << 18)	
/* 2^18 words */

#define RAM_INCREMENT	1024		
/* check in 4 kB increments */


#define uPD98401_PORTS	0x24		
/* probably more ? */


/*
 * Commands
 */


#define uPD98401_OPEN_CHAN	0x20000000 
/* open channel */

#define uPD98401_CHAN_ADDR	0x0003fff8 
/*      channel address */

#define uPD98401_CHAN_ADDR_SHIFT 3

#define uPD98401_CLOSE_CHAN	0x24000000 
/* close channel */

#define uPD98401_CHAN_RT	0x02000000 
/*      RX/TX (0 TX, 1 RX) */

#define uPD98401_DEACT_CHAN	0x28000000 
/* deactivate channel */

#define uPD98401_TX_READY	0x30000000 
/* TX ready */

#define uPD98401_ADD_BAT	0x34000000 
/* add batches */

#define uPD98401_POOL		0x000f0000 
/* pool number */

#define uPD98401_POOL_SHIFT	16

#define uPD98401_POOL_NUMBAT	0x0000ffff 
/* number of batches */

#define uPD98401_NOP		0x3f000000 
/* NOP */

#define uPD98401_IND_ACC	0x00000000 
/* Indirect Access */

#define uPD98401_IA_RW		0x10000000 
/*      Read/Write (0 W, 1 R) */

#define uPD98401_IA_B3		0x08000000 
/*      Byte select, 1 enable */

#define uPD98401_IA_B2		0x04000000

#define uPD98401_IA_B1		0x02000000

#define uPD98401_IA_B0		0x01000000

#define uPD98401_IA_BALL	0x0f000000 
/*   whole longword */

#define uPD98401_IA_TGT		0x000c0000 
/*      Target */

#define uPD98401_IA_TGT_SHIFT	18

#define uPD98401_IA_TGT_CM	0	   
/*      - Control Memory */

#define uPD98401_IA_TGT_SAR	1	   
/*      - uPD98401 registers */

#define uPD98401_IA_TGT_PHY	3	   
/*   - PHY device */

#define uPD98401_IA_ADDR	0x0003ffff

/*
 * Command Register Status
 */


#define uPD98401_BUSY		0x80000000 
/* SAR is busy */

#define uPD98401_LOCKED		0x40000000 
/* SAR is locked by other CPU */

/*
 * Indications
 */

/* Normal (AAL5) Receive Indication */

#define uPD98401_AAL5_UINFO	0xffff0000 
/* user-supplied information */

#define uPD98401_AAL5_UINFO_SHIFT 16

#define uPD98401_AAL5_SIZE	0x0000ffff 
/* PDU size (in _CELLS_ !!) */

#define uPD98401_AAL5_CHAN	0x7fff0000 
/* Channel number */

#define uPD98401_AAL5_CHAN_SHIFT	16

#define uPD98401_AAL5_ERR	0x00008000 
/* Error indication */

#define uPD98401_AAL5_CI	0x00004000 
/* Congestion Indication */

#define uPD98401_AAL5_CLP	0x00002000 
/* CLP (>= 1 cell had CLP=1) */

#define uPD98401_AAL5_ES	0x00000f00 
/* Error Status */

#define uPD98401_AAL5_ES_SHIFT	8

#define uPD98401_AAL5_ES_NONE	0	   
/*      No error */

#define uPD98401_AAL5_ES_FREE	1	   
/*      Receiver free buf underflow */

#define uPD98401_AAL5_ES_FIFO	2	   
/*      Receiver FIFO overrun */

#define uPD98401_AAL5_ES_TOOBIG	3	   
/*      Maximum length violation */

#define uPD98401_AAL5_ES_CRC	4	   
/*      CRC error */

#define uPD98401_AAL5_ES_ABORT	5	   
/*      User abort */

#define uPD98401_AAL5_ES_LENGTH	6	   
/*   Length violation */

#define uPD98401_AAL5_ES_T1	7	   
/*      T1 error (timeout) */

#define uPD98401_AAL5_ES_DEACT	8	   
/*      Deactivated with DEACT_CHAN */

#define uPD98401_AAL5_POOL	0x0000001f 
/* Free buffer pool number */

/* Raw Cell Indication */

#define uPD98401_RAW_UINFO	uPD98401_AAL5_UINFO

#define uPD98401_RAW_UINFO_SHIFT uPD98401_AAL5_UINFO_SHIFT

#define uPD98401_RAW_HEC	0x000000ff 
/* HEC */

#define uPD98401_RAW_CHAN	uPD98401_AAL5_CHAN

#define uPD98401_RAW_CHAN_SHIFT uPD98401_AAL5_CHAN_SHIFT

/* Transmit Indication */

#define uPD98401_TXI_CONN	0x7fff0000 
/* Connection Number */

#define uPD98401_TXI_CONN_SHIFT	16

#define uPD98401_TXI_ACTIVE	0x00008000 
/* Channel remains active */

#define uPD98401_TXI_PQP	0x00007fff 
/* Packet Queue Pointer */

/*
 * Directly Addressable Registers
 */


#define uPD98401_GMR	0x00	
/* General Mode Register */

#define uPD98401_GSR	0x01	
/* General Status Register */

#define uPD98401_IMR	0x02	
/* Interrupt Mask Register */

#define uPD98401_RQU	0x03	
/* Receive Queue Underrun */

#define uPD98401_RQA	0x04	
/* Receive Queue Alert */

#define uPD98401_ADDR	0x05	
/* Last Burst Address */

#define uPD98401_VER	0x06	
/* Version Number */

#define uPD98401_SWR	0x07	
/* Software Reset */

#define uPD98401_CMR	0x08	
/* Command Register */

#define uPD98401_CMR_L	0x09	
/* Command Register and Lock/Unlock */

#define uPD98401_CER	0x0a	
/* Command Extension Register */

#define uPD98401_CER_L	0x0b	
/* Command Ext Reg and Lock/Unlock */


#define uPD98401_MSH(n) (0x10+(n))	
/* Mailbox n Start Address High */

#define uPD98401_MSL(n) (0x14+(n))	
/* Mailbox n Start Address High */

#define uPD98401_MBA(n) (0x18+(n))	
/* Mailbox n Bottom Address */

#define uPD98401_MTA(n) (0x1c+(n))	
/* Mailbox n Tail Address */

#define uPD98401_MWA(n) (0x20+(n))	
/* Mailbox n Write Address */

/* GMR is at 0x00 */

#define uPD98401_GMR_ONE	0x80000000 
/* Must be set to one */

#define uPD98401_GMR_SLM	0x40000000 
/* Address mode (0 word, 1 byte) */

#define uPD98401_GMR_CPE	0x00008000 
/* Control Memory Parity Enable */

#define uPD98401_GMR_LP		0x00004000 
/* Loopback */

#define uPD98401_GMR_WA		0x00002000 
/* Early Bus Write Abort/RDY */

#define uPD98401_GMR_RA		0x00001000 
/* Early Read Abort/RDY */

#define uPD98401_GMR_SZ		0x00000f00 
/* Burst Size Enable */

#define uPD98401_BURST16	0x00000800 
/*      16-word burst */

#define uPD98401_BURST8		0x00000400 
/*       8-word burst */

#define uPD98401_BURST4		0x00000200 
/*       4-word burst */

#define uPD98401_BURST2		0x00000100 
/*       2-word burst */

#define uPD98401_GMR_AD		0x00000080 
/* Address (burst resolution) Disable */

#define uPD98401_GMR_BO		0x00000040 
/* Byte Order (0 little, 1 big) */

#define uPD98401_GMR_PM		0x00000020 
/* Bus Parity Mode (0 byte, 1 word)*/

#define uPD98401_GMR_PC		0x00000010 
/* Bus Parity Control (0even,1odd) */

#define uPD98401_GMR_BPE	0x00000008 
/* Bus Parity Enable */

#define uPD98401_GMR_DR		0x00000004 
/* Receive Drop Mode (0drop,1don't)*/

#define uPD98401_GMR_SE		0x00000002 
/* Shapers Enable */

#define uPD98401_GMR_RE		0x00000001 
/* Receiver Enable */

/* GSR is at 0x01, IMR is at 0x02 */

#define uPD98401_INT_PI		0x80000000 
/* PHY interrupt */

#define uPD98401_INT_RQA	0x40000000 
/* Receive Queue Alert */

#define uPD98401_INT_RQU	0x20000000 
/* Receive Queue Underrun */

#define uPD98401_INT_RD		0x10000000 
/* Receiver Deactivated */

#define uPD98401_INT_SPE	0x08000000 
/* System Parity Error */

#define uPD98401_INT_CPE	0x04000000 
/* Control Memory Parity Error */

#define uPD98401_INT_SBE	0x02000000 
/* System Bus Error */

#define uPD98401_INT_IND	0x01000000 
/* Initialization Done */

#define uPD98401_INT_RCR	0x0000ff00 
/* Raw Cell Received */

#define uPD98401_INT_RCR_SHIFT	8

#define uPD98401_INT_MF		0x000000f0 
/* Mailbox Full */

#define uPD98401_INT_MF_SHIFT	4

#define uPD98401_INT_MM		0x0000000f 
/* Mailbox Modified */

/* VER is at 0x06 */

#define uPD98401_MAJOR		0x0000ff00 
/* Major revision */

#define uPD98401_MAJOR_SHIFT	8

#define uPD98401_MINOR		0x000000ff 
/* Minor revision */

/*
 * Indirectly Addressable Registers
 */


#define uPD98401_IM(n)	(0x40000+(n))	
/* Scheduler n I and M */

#define uPD98401_X(n)	(0x40010+(n))	
/* Scheduler n X */

#define uPD98401_Y(n)	(0x40020+(n))	
/* Scheduler n Y */

#define uPD98401_PC(n)	(0x40030+(n))	
/* Scheduler n P, C, p and c */

#define uPD98401_PS(n)	(0x40040+(n))	
/* Scheduler n priority and status */

/* IM contents */

#define uPD98401_IM_I		0xff000000 
/* I */

#define uPD98401_IM_I_SHIFT	24

#define uPD98401_IM_M		0x00ffffff 
/* M */

/* PC contents */

#define uPD98401_PC_P		0xff000000 
/* P */

#define uPD98401_PC_P_SHIFT	24

#define uPD98401_PC_C		0x00ff0000 
/* C */

#define uPD98401_PC_C_SHIFT	16

#define uPD98401_PC_p		0x0000ff00 
/* p */

#define uPD98401_PC_p_SHIFT	8

#define uPD98401_PC_c		0x000000ff 
/* c */

/* PS contents */

#define uPD98401_PS_PRIO	0xf0	
/* Priority level (0 high, 15 low) */

#define uPD98401_PS_PRIO_SHIFT	4

#define uPD98401_PS_S		0x08	
/* Scan - must be 0 (internal) */

#define uPD98401_PS_R		0x04	
/* Round Robin (internal) */

#define uPD98401_PS_A		0x02	
/* Active (internal) */

#define uPD98401_PS_E		0x01	
/* Enabled */


#define uPD98401_TOS	0x40100	
/* Top of Stack Control Memory Address */

#define uPD98401_SMA	0x40200	
/* Shapers Control Memory Start Address */

#define uPD98401_PMA	0x40201	
/* Receive Pool Control Memory Start Address */

#define uPD98401_T1R	0x40300	
/* T1 Register */

#define uPD98401_VRR	0x40301	
/* VPI/VCI Reduction Register/Recv. Shutdown */

#define uPD98401_TSR	0x40302	
/* Time-Stamp Register */

/* VRR is at 0x40301 */

#define uPD98401_VRR_SDM	0x80000000 
/* Shutdown Mode */

#define uPD98401_VRR_SHIFT	0x000f0000 
/* VPI/VCI Shift */

#define uPD98401_VRR_SHIFT_SHIFT 16

#define uPD98401_VRR_MASK	0x0000ffff 
/* VPI/VCI mask */

/*
 * TX packet descriptor
 */


#define uPD98401_TXPD_SIZE	16	   
/* descriptor size (in bytes) */


#define uPD98401_TXPD_V		0x80000000 
/* Valid bit */

#define uPD98401_TXPD_DP	0x40000000 
/* Descriptor (1) or Pointer (0) */

#define uPD98401_TXPD_SM	0x20000000 
/* Single (1) or Multiple (0) */

#define uPD98401_TXPD_CLPM	0x18000000 
/* CLP mode */

#define uPD98401_CLPM_0		0	   
/*      00 CLP = 0 */

#define uPD98401_CLPM_1		3	   
/*      11 CLP = 1 */

#define uPD98401_CLPM_LAST	1	   
/*      01 CLP unless last cell */

#define uPD98401_TXPD_CLPM_SHIFT 27

#define uPD98401_TXPD_PTI	0x07000000 
/* PTI pattern */

#define uPD98401_TXPD_PTI_SHIFT	24

#define uPD98401_TXPD_GFC	0x00f00000 
/* GFC pattern */

#define uPD98401_TXPD_GFC_SHIFT	20

#define uPD98401_TXPD_C10	0x00040000 
/* insert CRC-10 */

#define uPD98401_TXPD_AAL5	0x00020000 
/* AAL5 processing */

#define uPD98401_TXPD_MB	0x00010000 
/* TX mailbox number */

#define uPD98401_TXPD_UU	0x0000ff00 
/* CPCS-UU */

#define uPD98401_TXPD_UU_SHIFT	8

#define uPD98401_TXPD_CPI	0x000000ff 
/* CPI */

/*
 * TX buffer descriptor
 */


#define uPD98401_TXBD_SIZE	8	   
/* descriptor size (in bytes) */


#define uPD98401_TXBD_LAST	0x80000000 
/* last buffer in packet */

/*
 * TX VC table
 */

/* 1st word has the same structure as in a TX packet descriptor */

#define uPD98401_TXVC_L		0x80000000 
/* last buffer */

#define uPD98401_TXVC_SHP	0x0f000000 
/* shaper number */

#define uPD98401_TXVC_SHP_SHIFT	24

#define uPD98401_TXVC_VPI	0x00ff0000 
/* VPI */

#define uPD98401_TXVC_VPI_SHIFT	16

#define uPD98401_TXVC_VCI	0x0000ffff 
/* VCI */

#define uPD98401_TXVC_QRP	6	   
/* Queue Read Pointer is in word 6 */

/*
 * RX free buffer pools descriptor
 */


#define uPD98401_RXFP_ALERT	0x70000000 
/* low water mark */

#define uPD98401_RXFP_ALERT_SHIFT 28

#define uPD98401_RXFP_BFSZ	0x0f000000 
/* buffer size, 64*2^n */

#define uPD98401_RXFP_BFSZ_SHIFT 24

#define uPD98401_RXFP_BTSZ	0x00ff0000 
/* batch size, n+1 */

#define uPD98401_RXFP_BTSZ_SHIFT 16

#define uPD98401_RXFP_REMAIN	0x0000ffff 
/* remaining batches in pool */

/*
 * RX VC table
 */


#define uPD98401_RXVC_BTSZ	0xff000000 
/* remaining free buffers in batch */

#define uPD98401_RXVC_BTSZ_SHIFT 24

#define uPD98401_RXVC_MB	0x00200000 
/* RX mailbox number */

#define uPD98401_RXVC_POOL	0x001f0000 
/* free buffer pool number */

#define uPD98401_RXVC_POOL_SHIFT 16

#define uPD98401_RXVC_UINFO	0x0000ffff 
/* user-supplied information */

#define uPD98401_RXVC_T1	0xffff0000 
/* T1 timestamp */

#define uPD98401_RXVC_T1_SHIFT	16

#define uPD98401_RXVC_PR	0x00008000 
/* Packet Reception, 1 if busy */

#define uPD98401_RXVC_DR	0x00004000 
/* FIFO Drop */

#define uPD98401_RXVC_OD	0x00001000 
/* Drop OAM cells */

#define uPD98401_RXVC_AR	0x00000800 
/* AAL5 or raw cell; 1 if AAL5 */

#define uPD98401_RXVC_MAXSEG	0x000007ff 
/* max number of segments per PDU */

#define uPD98401_RXVC_REM	0xfffe0000 
/* remaining words in curr buffer */

#define uPD98401_RXVC_REM_SHIFT	17

#define uPD98401_RXVC_CLP	0x00010000 
/* CLP received */

#define uPD98401_RXVC_BFA	0x00008000 
/* Buffer Assigned */

#define uPD98401_RXVC_BTA	0x00004000 
/* Batch Assigned */

#define uPD98401_RXVC_CI	0x00002000 
/* Congestion Indication */

#define uPD98401_RXVC_DD	0x00001000 
/* Dropping incoming cells */

#define uPD98401_RXVC_DP	0x00000800 
/* like PR ? */

#define uPD98401_RXVC_CURSEG	0x000007ff 
/* Current Segment count */

/*
 * RX lookup table
 */


#define uPD98401_RXLT_ENBL	0x8000	   
/* Enable */

#endif

Overall Contributors

PersonTokensPropCommitsCommitProp
Linus Torvalds (pre-git)102599.90%150.00%
Greg Kroah-Hartman10.10%150.00%
Total1026100.00%2100.00%
Directory: drivers/atm
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with cregit.