cregit-Linux how code gets into the kernel

Release 4.14 drivers/cpufreq/s3c2410-cpufreq.c

Directory: drivers/cpufreq
/*
 * Copyright (c) 2006-2008 Simtec Electronics
 *      http://armlinux.simtec.co.uk/
 *      Ben Dooks <ben@simtec.co.uk>
 *
 * S3C2410 CPU Frequency scaling
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
*/

#include <linux/init.h>
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/cpufreq.h>
#include <linux/device.h>
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/io.h>

#include <asm/mach/arch.h>
#include <asm/mach/map.h>

#include <mach/regs-clock.h>

#include <plat/cpu.h>
#include <plat/cpu-freq-core.h>

/* Note, 2410A has an extra mode for 1:4:4 ratio, bit 2 of CLKDIV */


static void s3c2410_cpufreq_setdivs(struct s3c_cpufreq_config *cfg) { u32 clkdiv = 0; if (cfg->divs.h_divisor == 2) clkdiv |= S3C2410_CLKDIVN_HDIVN; if (cfg->divs.p_divisor != cfg->divs.h_divisor) clkdiv |= S3C2410_CLKDIVN_PDIVN; __raw_writel(clkdiv, S3C2410_CLKDIVN); }

Contributors

PersonTokensPropCommitsCommitProp
Ben Dooks55100.00%1100.00%
Total55100.00%1100.00%


static int s3c2410_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg) { unsigned long hclk, fclk, pclk; unsigned int hdiv, pdiv; unsigned long hclk_max; fclk = cfg->freq.fclk; hclk_max = cfg->max.hclk; cfg->freq.armclk = fclk; s3c_freq_dbg("%s: fclk is %lu, max hclk %lu\n", __func__, fclk, hclk_max); hdiv = (fclk > cfg->max.hclk) ? 2 : 1; hclk = fclk / hdiv; if (hclk > cfg->max.hclk) { s3c_freq_dbg("%s: hclk too big\n", __func__); return -EINVAL; } pdiv = (hclk > cfg->max.pclk) ? 2 : 1; pclk = hclk / pdiv; if (pclk > cfg->max.pclk) { s3c_freq_dbg("%s: pclk too big\n", __func__); return -EINVAL; } pdiv *= hdiv; /* record the result */ cfg->divs.p_divisor = pdiv; cfg->divs.h_divisor = hdiv; return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Ben Dooks178100.00%1100.00%
Total178100.00%1100.00%

static struct s3c_cpufreq_info s3c2410_cpufreq_info = { .max = { .fclk = 200000000, .hclk = 100000000, .pclk = 50000000, }, /* transition latency is about 5ms worst-case, so * set 10ms to be sure */ .latency = 10000000, .locktime_m = 150, .locktime_u = 150, .locktime_bits = 12, .need_pll = 1, .name = "s3c2410", .calc_iotiming = s3c2410_iotiming_calc, .set_iotiming = s3c2410_iotiming_set, .get_iotiming = s3c2410_iotiming_get, .set_fvco = s3c2410_set_fvco, .set_refresh = s3c2410_cpufreq_setrefresh, .set_divs = s3c2410_cpufreq_setdivs, .calc_divs = s3c2410_cpufreq_calcdivs, .debug_io_show = s3c_cpufreq_debugfs_call(s3c2410_iotiming_debugfs), };
static int s3c2410_cpufreq_add(struct device *dev, struct subsys_interface *sif) { return s3c_cpufreq_register(&s3c2410_cpufreq_info); }

Contributors

PersonTokensPropCommitsCommitProp
Ben Dooks1669.57%133.33%
Heiko Stübner521.74%133.33%
Kay Sievers28.70%133.33%
Total23100.00%3100.00%

static struct subsys_interface s3c2410_cpufreq_interface = { .name = "s3c2410_cpufreq", .subsys = &s3c2410_subsys, .add_dev = s3c2410_cpufreq_add, };
static int __init s3c2410_cpufreq_init(void) { return subsys_interface_register(&s3c2410_cpufreq_interface); }

Contributors

PersonTokensPropCommitsCommitProp
Ben Dooks1487.50%150.00%
Kay Sievers212.50%150.00%
Total16100.00%2100.00%

arch_initcall(s3c2410_cpufreq_init);
static int s3c2410a_cpufreq_add(struct device *dev, struct subsys_interface *sif) { /* alter the maximum freq settings for S3C2410A. If a board knows * it only has a maximum of 200, then it should register its own * limits. */ s3c2410_cpufreq_info.max.fclk = 266000000; s3c2410_cpufreq_info.max.hclk = 133000000; s3c2410_cpufreq_info.max.pclk = 66500000; s3c2410_cpufreq_info.name = "s3c2410a"; return s3c2410_cpufreq_add(dev, sif); }

Contributors

PersonTokensPropCommitsCommitProp
Ben Dooks4581.82%133.33%
Heiko Stübner712.73%133.33%
Kay Sievers35.45%133.33%
Total55100.00%3100.00%

static struct subsys_interface s3c2410a_cpufreq_interface = { .name = "s3c2410a_cpufreq", .subsys = &s3c2410a_subsys, .add_dev = s3c2410a_cpufreq_add, };
static int __init s3c2410a_cpufreq_init(void) { return subsys_interface_register(&s3c2410a_cpufreq_interface); }

Contributors

PersonTokensPropCommitsCommitProp
Ben Dooks1487.50%150.00%
Kay Sievers212.50%150.00%
Total16100.00%2100.00%

arch_initcall(s3c2410a_cpufreq_init);

Overall Contributors

PersonTokensPropCommitsCommitProp
Ben Dooks49390.62%240.00%
Kay Sievers386.99%120.00%
Heiko Stübner122.21%120.00%
Kukjin Kim10.18%120.00%
Total544100.00%5100.00%
Directory: drivers/cpufreq
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with cregit.