cregit-Linux how code gets into the kernel

Release 4.14 drivers/gpio/gpio-twl4030.c

Directory: drivers/gpio
/*
 * Access to GPIOs on TWL4030/TPS659x0 chips
 *
 * Copyright (C) 2006-2007 Texas Instruments, Inc.
 * Copyright (C) 2006 MontaVista Software, Inc.
 *
 * Code re-arranged and cleaned up by:
 *      Syed Mohammed Khasim <x0khasim@ti.com>
 *
 * Initial Code:
 *      Andy Lowe / Nishanth Menon
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
 */

#include <linux/module.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/kthread.h>
#include <linux/irq.h>
#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/of.h>
#include <linux/irqdomain.h>

#include <linux/mfd/twl.h>

/*
 * The GPIO "subchip" supports 18 GPIOs which can be configured as
 * inputs or outputs, with pullups or pulldowns on each pin.  Each
 * GPIO can trigger interrupts on either or both edges.
 *
 * GPIO interrupts can be fed to either of two IRQ lines; this is
 * intended to support multiple hosts.
 *
 * There are also two LED pins used sometimes as output-only GPIOs.
 */

/* genirq interfaces are not available to modules */
#ifdef MODULE

#define is_module()	true
#else

#define is_module()	false
#endif

/* GPIO_CTRL Fields */

#define MASK_GPIO_CTRL_GPIO0CD1		BIT(0)

#define MASK_GPIO_CTRL_GPIO1CD2		BIT(1)

#define MASK_GPIO_CTRL_GPIO_ON		BIT(2)

/* Mask for GPIO registers when aggregated into a 32-bit integer */

#define GPIO_32_MASK			0x0003ffff


struct gpio_twl4030_priv {
	
struct gpio_chip gpio_chip;
	
struct mutex mutex;
	
int irq_base;

	/* Bitfields for state caching */
	
unsigned int usage_count;
	
unsigned int direction;
	
unsigned int out_state;
};

/*----------------------------------------------------------------------*/

/*
 * To configure TWL4030 GPIO module registers
 */

static inline int gpio_twl4030_write(u8 address, u8 data) { return twl_i2c_write_u8(TWL4030_MODULE_GPIO, data, address); }

Contributors

PersonTokensPropCommitsCommitProp
David Brownell2295.65%150.00%
Balaji T K14.35%150.00%
Total23100.00%2100.00%

/*----------------------------------------------------------------------*/ /* * LED register offsets from TWL_MODULE_LED base * PWMs A and B are dedicated to LEDs A and B, respectively. */ #define TWL4030_LED_LEDEN_REG 0x00 #define TWL4030_PWMAON_REG 0x01 #define TWL4030_PWMAOFF_REG 0x02 #define TWL4030_PWMBON_REG 0x03 #define TWL4030_PWMBOFF_REG 0x04 /* LEDEN bits */ #define LEDEN_LEDAON BIT(0) #define LEDEN_LEDBON BIT(1) #define LEDEN_LEDAEXT BIT(2) #define LEDEN_LEDBEXT BIT(3) #define LEDEN_LEDAPWM BIT(4) #define LEDEN_LEDBPWM BIT(5) #define LEDEN_PWM_LENGTHA BIT(6) #define LEDEN_PWM_LENGTHB BIT(7) #define PWMxON_LENGTH BIT(7) /*----------------------------------------------------------------------*/ /* * To read a TWL4030 GPIO module register */
static inline int gpio_twl4030_read(u8 address) { u8 data; int ret = 0; ret = twl_i2c_read_u8(TWL4030_MODULE_GPIO, &data, address); return (ret < 0) ? ret : data; }

Contributors

PersonTokensPropCommitsCommitProp
David Brownell4097.56%150.00%
Balaji T K12.44%150.00%
Total41100.00%2100.00%

/*----------------------------------------------------------------------*/ static u8 cached_leden; /* The LED lines are open drain outputs ... a FET pulls to GND, so an * external pullup is needed. We could also expose the integrated PWM * as a LED brightness control; we initialize it as "always on". */
static void twl4030_led_set_value(int led, int value) { u8 mask = LEDEN_LEDAON | LEDEN_LEDAPWM; if (led) mask <<= 1; if (value) cached_leden &= ~mask; else cached_leden |= mask; WARN_ON_ONCE(twl_i2c_write_u8(TWL4030_MODULE_LED, cached_leden, TWL4030_LED_LEDEN_REG)); }

Contributors

PersonTokensPropCommitsCommitProp
David Brownell4890.57%125.00%
Alexander Shiyan35.66%125.00%
Balaji T K11.89%125.00%
Peter Ujfalusi11.89%125.00%
Total53100.00%4100.00%


static int twl4030_set_gpio_direction(int gpio, int is_input) { u8 d_bnk = gpio >> 3; u8 d_msk = BIT(gpio & 0x7); u8 reg = 0; u8 base = REG_GPIODATADIR1 + d_bnk; int ret = 0; ret = gpio_twl4030_read(base); if (ret >= 0) { if (is_input) reg = ret & ~d_msk; else reg = ret | d_msk; ret = gpio_twl4030_write(base, reg); } return ret; }

Contributors

PersonTokensPropCommitsCommitProp
David Brownell91100.00%1100.00%
Total91100.00%1100.00%


static int twl4030_set_gpio_dataout(int gpio, int enable) { u8 d_bnk = gpio >> 3; u8 d_msk = BIT(gpio & 0x7); u8 base = 0; if (enable) base = REG_SETGPIODATAOUT1 + d_bnk; else base = REG_CLEARGPIODATAOUT1 + d_bnk; return gpio_twl4030_write(base, d_msk); }

Contributors

PersonTokensPropCommitsCommitProp
David Brownell59100.00%1100.00%
Total59100.00%1100.00%


static int twl4030_get_gpio_datain(int gpio) { u8 d_bnk = gpio >> 3; u8 d_off = gpio & 0x7; u8 base = 0; int ret = 0; base = REG_GPIODATAIN1 + d_bnk; ret = gpio_twl4030_read(base); if (ret > 0) ret = (ret >> d_off) & 0x1; return ret; }

Contributors

PersonTokensPropCommitsCommitProp
David Brownell65100.00%1100.00%
Total65100.00%1100.00%

/*----------------------------------------------------------------------*/
static int twl_request(struct gpio_chip *chip, unsigned offset) { struct gpio_twl4030_priv *priv = gpiochip_get_data(chip); int status = 0; mutex_lock(&priv->mutex); /* Support the two LED outputs as output-only GPIOs. */ if (offset >= TWL4030_GPIO_MAX) { u8 ledclr_mask = LEDEN_LEDAON | LEDEN_LEDAEXT | LEDEN_LEDAPWM | LEDEN_PWM_LENGTHA; u8 reg = TWL4030_PWMAON_REG; offset -= TWL4030_GPIO_MAX; if (offset) { ledclr_mask <<= 1; reg = TWL4030_PWMBON_REG; } /* initialize PWM to always-drive */ /* Configure PWM OFF register first */ status = twl_i2c_write_u8(TWL4030_MODULE_LED, 0x7f, reg + 1); if (status < 0) goto done; /* Followed by PWM ON register */ status = twl_i2c_write_u8(TWL4030_MODULE_LED, 0x7f, reg); if (status < 0) goto done; /* init LED to not-driven (high) */ status = twl_i2c_read_u8(TWL4030_MODULE_LED, &cached_leden, TWL4030_LED_LEDEN_REG); if (status < 0) goto done; cached_leden &= ~ledclr_mask; status = twl_i2c_write_u8(TWL4030_MODULE_LED, cached_leden, TWL4030_LED_LEDEN_REG); if (status < 0) goto done; status = 0; goto done; } /* on first use, turn GPIO module "on" */ if (!priv->usage_count) { struct twl4030_gpio_platform_data *pdata; u8 value = MASK_GPIO_CTRL_GPIO_ON; /* optionally have the first two GPIOs switch vMMC1 * and vMMC2 power supplies based on card presence. */ pdata = dev_get_platdata(chip->parent); if (pdata) value |= pdata->mmc_cd & 0x03; status = gpio_twl4030_write(REG_GPIO_CTRL, value); } done: if (!status) priv->usage_count |= BIT(offset); mutex_unlock(&priv->mutex); return status; }

Contributors

PersonTokensPropCommitsCommitProp
David Brownell20278.60%111.11%
Peter Ujfalusi4216.34%333.33%
Benoît Cousson41.56%111.11%
Balaji T K41.56%111.11%
Jingoo Han31.17%111.11%
Linus Walleij20.78%222.22%
Total257100.00%9100.00%


static void twl_free(struct gpio_chip *chip, unsigned offset) { struct gpio_twl4030_priv *priv = gpiochip_get_data(chip); mutex_lock(&priv->mutex); if (offset >= TWL4030_GPIO_MAX) { twl4030_led_set_value(offset - TWL4030_GPIO_MAX, 1); goto out; } priv->usage_count &= ~BIT(offset); /* on last use, switch off GPIO module */ if (!priv->usage_count) gpio_twl4030_write(REG_GPIO_CTRL, 0x0); out: mutex_unlock(&priv->mutex); }

Contributors

PersonTokensPropCommitsCommitProp
David Brownell5563.22%125.00%
Peter Ujfalusi3135.63%250.00%
Linus Walleij11.15%125.00%
Total87100.00%4100.00%


static int twl_direction_in(struct gpio_chip *chip, unsigned offset) { struct gpio_twl4030_priv *priv = gpiochip_get_data(chip); int ret; mutex_lock(&priv->mutex); if (offset < TWL4030_GPIO_MAX) ret = twl4030_set_gpio_direction(offset, 1); else ret = -EINVAL; /* LED outputs can't be set as input */ if (!ret) priv->direction &= ~BIT(offset); mutex_unlock(&priv->mutex); return ret; }

Contributors

PersonTokensPropCommitsCommitProp
Peter Ujfalusi5566.27%125.00%
David Brownell2631.33%125.00%
Roger Quadros11.20%125.00%
Linus Walleij11.20%125.00%
Total83100.00%4100.00%


static int twl_get(struct gpio_chip *chip, unsigned offset) { struct gpio_twl4030_priv *priv = gpiochip_get_data(chip); int ret; int status = 0; mutex_lock(&priv->mutex); if (!(priv->usage_count & BIT(offset))) { ret = -EPERM; goto out; } if (priv->direction & BIT(offset)) status = priv->out_state & BIT(offset); else status = twl4030_get_gpio_datain(offset); ret = (status < 0) ? status : !!status; out: mutex_unlock(&priv->mutex); return ret; }

Contributors

PersonTokensPropCommitsCommitProp
Peter Ujfalusi7561.98%240.00%
David Brownell4033.06%120.00%
Linus Walleij64.96%240.00%
Total121100.00%5100.00%


static void twl_set(struct gpio_chip *chip, unsigned offset, int value) { struct gpio_twl4030_priv *priv = gpiochip_get_data(chip); mutex_lock(&priv->mutex); if (offset < TWL4030_GPIO_MAX) twl4030_set_gpio_dataout(offset, value); else twl4030_led_set_value(offset - TWL4030_GPIO_MAX, value); if (value) priv->out_state |= BIT(offset); else priv->out_state &= ~BIT(offset); mutex_unlock(&priv->mutex); }

Contributors

PersonTokensPropCommitsCommitProp
Peter Ujfalusi5156.67%133.33%
David Brownell3842.22%133.33%
Linus Walleij11.11%133.33%
Total90100.00%3100.00%


static int twl_direction_out(struct gpio_chip *chip, unsigned offset, int value) { struct gpio_twl4030_priv *priv = gpiochip_get_data(chip); int ret = 0; mutex_lock(&priv->mutex); if (offset < TWL4030_GPIO_MAX) { ret = twl4030_set_gpio_direction(offset, 0); if (ret) { mutex_unlock(&priv->mutex); return ret; } } /* * LED gpios i.e. offset >= TWL4030_GPIO_MAX are always output */ priv->direction |= BIT(offset); mutex_unlock(&priv->mutex); twl_set(chip, offset, value); return ret; }

Contributors

PersonTokensPropCommitsCommitProp
Peter Ujfalusi4139.42%120.00%
David Brownell3230.77%120.00%
Roger Quadros2120.19%120.00%
Tony Lindgren98.65%120.00%
Linus Walleij10.96%120.00%
Total104100.00%5100.00%


static int twl_to_irq(struct gpio_chip *chip, unsigned offset) { struct gpio_twl4030_priv *priv = gpiochip_get_data(chip); return (priv->irq_base && (offset < TWL4030_GPIO_MAX)) ? (priv->irq_base + offset) : -EINVAL; }

Contributors

PersonTokensPropCommitsCommitProp
David Brownell3266.67%133.33%
Peter Ujfalusi1531.25%133.33%
Linus Walleij12.08%133.33%
Total48100.00%3100.00%

static const struct gpio_chip template_chip = { .label = "twl4030", .owner = THIS_MODULE, .request = twl_request, .free = twl_free, .direction_input = twl_direction_in, .get = twl_get, .direction_output = twl_direction_out, .set = twl_set, .to_irq = twl_to_irq, .can_sleep = true, }; /*----------------------------------------------------------------------*/
static int gpio_twl4030_pulls(u32 ups, u32 downs) { u8 message[5]; unsigned i, gpio_bit; /* For most pins, a pulldown was enabled by default. * We should have data that's specific to this board. */ for (gpio_bit = 1, i = 0; i < 5; i++) { u8 bit_mask; unsigned j; for (bit_mask = 0, j = 0; j < 8; j += 2, gpio_bit <<= 1) { if (ups & gpio_bit) bit_mask |= 1 << (j + 1); else if (downs & gpio_bit) bit_mask |= 1 << (j + 0); } message[i] = bit_mask; } return twl_i2c_write(TWL4030_MODULE_GPIO, message, REG_GPIOPUPDCTR1, 5); }

Contributors

PersonTokensPropCommitsCommitProp
David Brownell12196.80%133.33%
Peter Ujfalusi32.40%133.33%
Balaji T K10.80%133.33%
Total125100.00%3100.00%


static int gpio_twl4030_debounce(u32 debounce, u8 mmc_cd) { u8 message[3]; /* 30 msec of debouncing is always used for MMC card detect, * and is optional for everything else. */ message[0] = (debounce & 0xff) | (mmc_cd & 0x03); debounce >>= 8; message[1] = (debounce & 0xff); debounce >>= 8; message[2] = (debounce & 0x03); return twl_i2c_write(TWL4030_MODULE_GPIO, message, REG_GPIO_DEBEN1, 3); }

Contributors

PersonTokensPropCommitsCommitProp
David Brownell7393.59%133.33%
Peter Ujfalusi45.13%133.33%
Balaji T K11.28%133.33%
Total78100.00%3100.00%

static int gpio_twl4030_remove(struct platform_device *pdev);
static struct twl4030_gpio_platform_data *of_gpio_twl4030(struct device *dev, struct twl4030_gpio_platform_data *pdata) { struct twl4030_gpio_platform_data *omap_twl_info; omap_twl_info = devm_kzalloc(dev, sizeof(*omap_twl_info), GFP_KERNEL); if (!omap_twl_info) return NULL; if (pdata) *omap_twl_info = *pdata; omap_twl_info->use_leds = of_property_read_bool(dev->of_node, "ti,use-leds"); of_property_read_u32(dev->of_node, "ti,debounce", &omap_twl_info->debounce); of_property_read_u32(dev->of_node, "ti,mmc-cd", (u32 *)&omap_twl_info->mmc_cd); of_property_read_u32(dev->of_node, "ti,pullups", &omap_twl_info->pullups); of_property_read_u32(dev->of_node, "ti,pulldowns", &omap_twl_info->pulldowns); return omap_twl_info; }

Contributors

PersonTokensPropCommitsCommitProp
Florian Vaussard11788.64%150.00%
Tony Lindgren1511.36%150.00%
Total132100.00%2100.00%


static int gpio_twl4030_probe(struct platform_device *pdev) { struct twl4030_gpio_platform_data *pdata = dev_get_platdata(&pdev->dev); struct device_node *node = pdev->dev.of_node; struct gpio_twl4030_priv *priv; int ret, irq_base; priv = devm_kzalloc(&pdev->dev, sizeof(struct gpio_twl4030_priv), GFP_KERNEL); if (!priv) return -ENOMEM; /* maybe setup IRQs */ if (is_module()) { dev_err(&pdev->dev, "can't dispatch IRQs from modules\n"); goto no_irqs; } irq_base = devm_irq_alloc_descs(&pdev->dev, -1, 0, TWL4030_GPIO_MAX, 0); if (irq_base < 0) { dev_err(&pdev->dev, "Failed to alloc irq_descs\n"); return irq_base; } irq_domain_add_legacy(node, TWL4030_GPIO_MAX, irq_base, 0, &irq_domain_simple_ops, NULL); ret = twl4030_sih_setup(&pdev->dev, TWL4030_MODULE_GPIO, irq_base); if (ret < 0) return ret; priv->irq_base = irq_base; no_irqs: priv->gpio_chip = template_chip; priv->gpio_chip.base = -1; priv->gpio_chip.ngpio = TWL4030_GPIO_MAX; priv->gpio_chip.parent = &pdev->dev; mutex_init(&priv->mutex); if (node) pdata = of_gpio_twl4030(&pdev->dev, pdata); if (pdata == NULL) { dev_err(&pdev->dev, "Platform data is missing\n"); return -ENXIO; } /* * NOTE: boards may waste power if they don't set pullups * and pulldowns correctly ... default for non-ULPI pins is * pulldown, and some other pins may have external pullups * or pulldowns. Careful! */ ret = gpio_twl4030_pulls(pdata->pullups, pdata->pulldowns); if (ret) dev_dbg(&pdev->dev, "pullups %.05x %.05x --> %d\n", pdata->pullups, pdata->pulldowns, ret); ret = gpio_twl4030_debounce(pdata->debounce, pdata->mmc_cd); if (ret) dev_dbg(&pdev->dev, "debounce %.03x %.01x --> %d\n", pdata->debounce, pdata->mmc_cd, ret); /* * NOTE: we assume VIBRA_CTL.VIBRA_EN, in MODULE_AUDIO_VOICE, * is (still) clear if use_leds is set. */ if (pdata->use_leds) priv->gpio_chip.ngpio += 2; ret = gpiochip_add_data(&priv->gpio_chip, priv); if (ret < 0) { dev_err(&pdev->dev, "could not register gpiochip, %d\n", ret); priv->gpio_chip.ngpio = 0; gpio_twl4030_remove(pdev); goto out; } platform_set_drvdata(pdev, priv); if (pdata->setup) { int status; status = pdata->setup(&pdev->dev, priv->gpio_chip.base, TWL4030_GPIO_MAX); if (status) dev_dbg(&pdev->dev, "setup --> %d\n", status); } out: return ret; }

Contributors

PersonTokensPropCommitsCommitProp
David Brownell23050.33%214.29%
Benoît Cousson9420.57%321.43%
Peter Ujfalusi7817.07%214.29%
Florian Vaussard337.22%17.14%
Tony Lindgren81.75%214.29%
Bartosz Golaszewski61.31%17.14%
Jingoo Han40.88%17.14%
Linus Walleij40.88%214.29%
Total457100.00%14100.00%

/* Cannot use as gpio_twl4030_probe() calls us */
static int gpio_twl4030_remove(struct platform_device *pdev) { struct twl4030_gpio_platform_data *pdata = dev_get_platdata(&pdev->dev); struct gpio_twl4030_priv *priv = platform_get_drvdata(pdev); int status; if (pdata && pdata->teardown) { status = pdata->teardown(&pdev->dev, priv->gpio_chip.base, TWL4030_GPIO_MAX); if (status) { dev_dbg(&pdev->dev, "teardown --> %d\n", status); return status; } } gpiochip_remove(&priv->gpio_chip); if (is_module()) return 0; /* REVISIT no support yet for deregistering all the IRQs */ WARN_ON(1); return -EIO; }

Contributors

PersonTokensPropCommitsCommitProp
David Brownell9078.95%125.00%
Peter Ujfalusi1815.79%125.00%
Jingoo Han43.51%125.00%
Benoît Cousson21.75%125.00%
Total114100.00%4100.00%

static const struct of_device_id twl_gpio_match[] = { { .compatible = "ti,twl4030-gpio", }, { }, }; MODULE_DEVICE_TABLE(of, twl_gpio_match); /* Note: this hardware lives inside an I2C-based multi-function device. */ MODULE_ALIAS("platform:twl4030_gpio"); static struct platform_driver gpio_twl4030_driver = { .driver = { .name = "twl4030_gpio", .of_match_table = twl_gpio_match, }, .probe = gpio_twl4030_probe, .remove = gpio_twl4030_remove, };
static int __init gpio_twl4030_init(void) { return platform_driver_register(&gpio_twl4030_driver); }

Contributors

PersonTokensPropCommitsCommitProp
David Brownell16100.00%1100.00%
Total16100.00%1100.00%

subsys_initcall(gpio_twl4030_init);
static void __exit gpio_twl4030_exit(void) { platform_driver_unregister(&gpio_twl4030_driver); }

Contributors

PersonTokensPropCommitsCommitProp
David Brownell15100.00%1100.00%
Total15100.00%1100.00%

module_exit(gpio_twl4030_exit); MODULE_AUTHOR("Texas Instruments, Inc."); MODULE_DESCRIPTION("GPIO interface for TWL4030"); MODULE_LICENSE("GPL");

Overall Contributors

PersonTokensPropCommitsCommitProp
David Brownell153064.18%27.69%
Peter Ujfalusi46019.30%415.38%
Florian Vaussard1506.29%13.85%
Benoît Cousson1395.83%311.54%
Tony Lindgren321.34%311.54%
Roger Quadros220.92%13.85%
Linus Walleij180.76%415.38%
Jingoo Han110.46%13.85%
Balaji T K90.38%13.85%
Bartosz Golaszewski60.25%13.85%
Alexander Shiyan30.13%13.85%
Grant C. Likely10.04%13.85%
Bill Pemberton10.04%13.85%
Julia Lawall10.04%13.85%
Wolfram Sang10.04%13.85%
Total2384100.00%26100.00%
Directory: drivers/gpio
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with cregit.