cregit-Linux how code gets into the kernel

Release 4.14 drivers/hwmon/ina209.c

Directory: drivers/hwmon
/*
 * Driver for the Texas Instruments / Burr Brown INA209
 * Bidirectional Current/Power Monitor
 *
 * Copyright (C) 2012 Guenter Roeck <linux@roeck-us.net>
 *
 * Derived from Ira W. Snyder's original driver submission
 *      Copyright (C) 2008 Paul Hays <Paul.Hays@cattail.ca>
 *      Copyright (C) 2008-2009 Ira W. Snyder <iws@ovro.caltech.edu>
 *
 * Aligned with ina2xx driver
 *      Copyright (C) 2012 Lothar Felten <l-felten@ti.com>
 *      Thanks to Jan Volkering
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; version 2 of the License.
 *
 * Datasheet:
 * http://www.ti.com/lit/gpn/ina209
 */

#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/err.h>
#include <linux/slab.h>
#include <linux/bug.h>
#include <linux/i2c.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>

#include <linux/platform_data/ina2xx.h>

/* register definitions */

#define INA209_CONFIGURATION		0x00

#define INA209_STATUS			0x01

#define INA209_STATUS_MASK		0x02

#define INA209_SHUNT_VOLTAGE		0x03

#define INA209_BUS_VOLTAGE		0x04

#define INA209_POWER			0x05

#define INA209_CURRENT			0x06

#define INA209_SHUNT_VOLTAGE_POS_PEAK	0x07

#define INA209_SHUNT_VOLTAGE_NEG_PEAK	0x08

#define INA209_BUS_VOLTAGE_MAX_PEAK	0x09

#define INA209_BUS_VOLTAGE_MIN_PEAK	0x0a

#define INA209_POWER_PEAK		0x0b

#define INA209_SHUNT_VOLTAGE_POS_WARN	0x0c

#define INA209_SHUNT_VOLTAGE_NEG_WARN	0x0d

#define INA209_POWER_WARN		0x0e

#define INA209_BUS_VOLTAGE_OVER_WARN	0x0f

#define INA209_BUS_VOLTAGE_UNDER_WARN	0x10

#define INA209_POWER_OVER_LIMIT		0x11

#define INA209_BUS_VOLTAGE_OVER_LIMIT	0x12

#define INA209_BUS_VOLTAGE_UNDER_LIMIT	0x13

#define INA209_CRITICAL_DAC_POS		0x14

#define INA209_CRITICAL_DAC_NEG		0x15

#define INA209_CALIBRATION		0x16


#define INA209_REGISTERS		0x17


#define INA209_CONFIG_DEFAULT		0x3c47	
/* PGA=8, full range */

#define INA209_SHUNT_DEFAULT		10000	
/* uOhm */


struct ina209_data {
	
struct i2c_client *client;

	
struct mutex update_lock;
	
bool valid;
	
unsigned long last_updated;	/* in jiffies */

	
u16 regs[INA209_REGISTERS];	/* All chip registers */

	
u16 config_orig;		/* Original configuration */
	
u16 calibration_orig;		/* Original calibration */
	
u16 update_interval;
};


static struct ina209_data *ina209_update_device(struct device *dev) { struct ina209_data *data = dev_get_drvdata(dev); struct i2c_client *client = data->client; struct ina209_data *ret = data; s32 val; int i; mutex_lock(&data->update_lock); if (!data->valid || time_after(jiffies, data->last_updated + data->update_interval)) { for (i = 0; i < ARRAY_SIZE(data->regs); i++) { val = i2c_smbus_read_word_swapped(client, i); if (val < 0) { ret = ERR_PTR(val); goto abort; } data->regs[i] = val; } data->last_updated = jiffies; data->valid = true; } abort: mutex_unlock(&data->update_lock); return ret; }

Contributors

PersonTokensPropCommitsCommitProp
Guenter Roeck156100.00%2100.00%
Total156100.00%2100.00%

/* * Read a value from a device register and convert it to the * appropriate sysfs units */
static long ina209_from_reg(const u8 reg, const u16 val) { switch (reg) { case INA209_SHUNT_VOLTAGE: case INA209_SHUNT_VOLTAGE_POS_PEAK: case INA209_SHUNT_VOLTAGE_NEG_PEAK: case INA209_SHUNT_VOLTAGE_POS_WARN: case INA209_SHUNT_VOLTAGE_NEG_WARN: /* LSB=10 uV. Convert to mV. */ return DIV_ROUND_CLOSEST((s16)val, 100); case INA209_BUS_VOLTAGE: case INA209_BUS_VOLTAGE_MAX_PEAK: case INA209_BUS_VOLTAGE_MIN_PEAK: case INA209_BUS_VOLTAGE_OVER_WARN: case INA209_BUS_VOLTAGE_UNDER_WARN: case INA209_BUS_VOLTAGE_OVER_LIMIT: case INA209_BUS_VOLTAGE_UNDER_LIMIT: /* LSB=4 mV, last 3 bits unused */ return (val >> 3) * 4; case INA209_CRITICAL_DAC_POS: /* LSB=1 mV, in the upper 8 bits */ return val >> 8; case INA209_CRITICAL_DAC_NEG: /* LSB=1 mV, in the upper 8 bits */ return -1 * (val >> 8); case INA209_POWER: case INA209_POWER_PEAK: case INA209_POWER_WARN: case INA209_POWER_OVER_LIMIT: /* LSB=20 mW. Convert to uW */ return val * 20 * 1000L; case INA209_CURRENT: /* LSB=1 mA (selected). Is in mA */ return (s16)val; } /* programmer goofed */ WARN_ON_ONCE(1); return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Guenter Roeck13495.71%150.00%
Joe Schaack64.29%150.00%
Total140100.00%2100.00%

/* * Take a value and convert it to register format, clamping the value * to the appropriate range. */
static int ina209_to_reg(u8 reg, u16 old, long val) { switch (reg) { case INA209_SHUNT_VOLTAGE_POS_WARN: case INA209_SHUNT_VOLTAGE_NEG_WARN: /* Limit to +- 320 mV, 10 uV LSB */ return clamp_val(val, -320, 320) * 100; case INA209_BUS_VOLTAGE_OVER_WARN: case INA209_BUS_VOLTAGE_UNDER_WARN: case INA209_BUS_VOLTAGE_OVER_LIMIT: case INA209_BUS_VOLTAGE_UNDER_LIMIT: /* * Limit to 0-32000 mV, 4 mV LSB * * The last three bits aren't part of the value, but we'll * preserve them in their original state. */ return (DIV_ROUND_CLOSEST(clamp_val(val, 0, 32000), 4) << 3) | (old & 0x7); case INA209_CRITICAL_DAC_NEG: /* * Limit to -255-0 mV, 1 mV LSB * Convert the value to a positive value for the register * * The value lives in the top 8 bits only, be careful * and keep original value of other bits. */ return (clamp_val(-val, 0, 255) << 8) | (old & 0xff); case INA209_CRITICAL_DAC_POS: /* * Limit to 0-255 mV, 1 mV LSB * * The value lives in the top 8 bits only, be careful * and keep original value of other bits. */ return (clamp_val(val, 0, 255) << 8) | (old & 0xff); case INA209_POWER_WARN: case INA209_POWER_OVER_LIMIT: /* 20 mW LSB */ return DIV_ROUND_CLOSEST(val, 20 * 1000); } /* Other registers are read-only, return access error */ return -EACCES; }

Contributors

PersonTokensPropCommitsCommitProp
Guenter Roeck150100.00%1100.00%
Total150100.00%1100.00%


static int ina209_interval_from_reg(u16 reg) { return 68 >> (15 - ((reg >> 3) & 0x0f)); }

Contributors

PersonTokensPropCommitsCommitProp
Guenter Roeck26100.00%1100.00%
Total26100.00%1100.00%


static u16 ina209_reg_from_interval(u16 config, long interval) { int i, adc; if (interval <= 0) { adc = 8; } else { adc = 15; for (i = 34 + 34 / 2; i; i >>= 1) { if (i < interval) break; adc--; } } return (config & 0xf807) | (adc << 3) | (adc << 7); }

Contributors

PersonTokensPropCommitsCommitProp
Guenter Roeck83100.00%1100.00%
Total83100.00%1100.00%


static ssize_t ina209_set_interval(struct device *dev, struct device_attribute *da, const char *buf, size_t count) { struct ina209_data *data = ina209_update_device(dev); long val; u16 regval; int ret; if (IS_ERR(data)) return PTR_ERR(data); ret = kstrtol(buf, 10, &val); if (ret < 0) return ret; mutex_lock(&data->update_lock); regval = ina209_reg_from_interval(data->regs[INA209_CONFIGURATION], val); i2c_smbus_write_word_swapped(data->client, INA209_CONFIGURATION, regval); data->regs[INA209_CONFIGURATION] = regval; data->update_interval = ina209_interval_from_reg(regval); mutex_unlock(&data->update_lock); return count; }

Contributors

PersonTokensPropCommitsCommitProp
Guenter Roeck139100.00%2100.00%
Total139100.00%2100.00%


static ssize_t ina209_show_interval(struct device *dev, struct device_attribute *da, char *buf) { struct ina209_data *data = dev_get_drvdata(dev); return snprintf(buf, PAGE_SIZE, "%d\n", data->update_interval); }

Contributors

PersonTokensPropCommitsCommitProp
Guenter Roeck44100.00%2100.00%
Total44100.00%2100.00%

/* * History is reset by writing 1 into bit 0 of the respective peak register. * Since more than one peak register may be affected by the scope of a * reset_history attribute write, use a bit mask in attr->index to identify * which registers are affected. */ static u16 ina209_reset_history_regs[] = { INA209_SHUNT_VOLTAGE_POS_PEAK, INA209_SHUNT_VOLTAGE_NEG_PEAK, INA209_BUS_VOLTAGE_MAX_PEAK, INA209_BUS_VOLTAGE_MIN_PEAK, INA209_POWER_PEAK };
static ssize_t ina209_reset_history(struct device *dev, struct device_attribute *da, const char *buf, size_t count) { struct sensor_device_attribute *attr = to_sensor_dev_attr(da); struct ina209_data *data = dev_get_drvdata(dev); struct i2c_client *client = data->client; u32 mask = attr->index; long val; int i, ret; ret = kstrtol(buf, 10, &val); if (ret < 0) return ret; mutex_lock(&data->update_lock); for (i = 0; i < ARRAY_SIZE(ina209_reset_history_regs); i++) { if (mask & (1 << i)) i2c_smbus_write_word_swapped(client, ina209_reset_history_regs[i], 1); } data->valid = false; mutex_unlock(&data->update_lock); return count; }

Contributors

PersonTokensPropCommitsCommitProp
Guenter Roeck154100.00%2100.00%
Total154100.00%2100.00%


static ssize_t ina209_set_value(struct device *dev, struct device_attribute *da, const char *buf, size_t count) { struct ina209_data *data = ina209_update_device(dev); struct sensor_device_attribute *attr = to_sensor_dev_attr(da); int reg = attr->index; long val; int ret; if (IS_ERR(data)) return PTR_ERR(data); ret = kstrtol(buf, 10, &val); if (ret < 0) return ret; mutex_lock(&data->update_lock); ret = ina209_to_reg(reg, data->regs[reg], val); if (ret < 0) { count = ret; goto abort; } i2c_smbus_write_word_swapped(data->client, reg, ret); data->regs[reg] = ret; abort: mutex_unlock(&data->update_lock); return count; }

Contributors

PersonTokensPropCommitsCommitProp
Guenter Roeck163100.00%2100.00%
Total163100.00%2100.00%


static ssize_t ina209_show_value(struct device *dev, struct device_attribute *da, char *buf) { struct sensor_device_attribute *attr = to_sensor_dev_attr(da); struct ina209_data *data = ina209_update_device(dev); long val; if (IS_ERR(data)) return PTR_ERR(data); val = ina209_from_reg(attr->index, data->regs[attr->index]); return snprintf(buf, PAGE_SIZE, "%ld\n", val); }

Contributors

PersonTokensPropCommitsCommitProp
Guenter Roeck86100.00%1100.00%
Total86100.00%1100.00%


static ssize_t ina209_show_alarm(struct device *dev, struct device_attribute *da, char *buf) { struct sensor_device_attribute *attr = to_sensor_dev_attr(da); struct ina209_data *data = ina209_update_device(dev); const unsigned int mask = attr->index; u16 status; if (IS_ERR(data)) return PTR_ERR(data); status = data->regs[INA209_STATUS]; /* * All alarms are in the INA209_STATUS register. To avoid a long * switch statement, the mask is passed in attr->index */ return snprintf(buf, PAGE_SIZE, "%u\n", !!(status & mask)); }

Contributors

PersonTokensPropCommitsCommitProp
Guenter Roeck93100.00%1100.00%
Total93100.00%1100.00%

/* Shunt voltage, history, limits, alarms */ static SENSOR_DEVICE_ATTR(in0_input, S_IRUGO, ina209_show_value, NULL, INA209_SHUNT_VOLTAGE); static SENSOR_DEVICE_ATTR(in0_input_highest, S_IRUGO, ina209_show_value, NULL, INA209_SHUNT_VOLTAGE_POS_PEAK); static SENSOR_DEVICE_ATTR(in0_input_lowest, S_IRUGO, ina209_show_value, NULL, INA209_SHUNT_VOLTAGE_NEG_PEAK); static SENSOR_DEVICE_ATTR(in0_reset_history, S_IWUSR, NULL, ina209_reset_history, (1 << 0) | (1 << 1)); static SENSOR_DEVICE_ATTR(in0_max, S_IRUGO | S_IWUSR, ina209_show_value, ina209_set_value, INA209_SHUNT_VOLTAGE_POS_WARN); static SENSOR_DEVICE_ATTR(in0_min, S_IRUGO | S_IWUSR, ina209_show_value, ina209_set_value, INA209_SHUNT_VOLTAGE_NEG_WARN); static SENSOR_DEVICE_ATTR(in0_crit_max, S_IRUGO | S_IWUSR, ina209_show_value, ina209_set_value, INA209_CRITICAL_DAC_POS); static SENSOR_DEVICE_ATTR(in0_crit_min, S_IRUGO | S_IWUSR, ina209_show_value, ina209_set_value, INA209_CRITICAL_DAC_NEG); static SENSOR_DEVICE_ATTR(in0_min_alarm, S_IRUGO, ina209_show_alarm, NULL, 1 << 11); static SENSOR_DEVICE_ATTR(in0_max_alarm, S_IRUGO, ina209_show_alarm, NULL, 1 << 12); static SENSOR_DEVICE_ATTR(in0_crit_min_alarm, S_IRUGO, ina209_show_alarm, NULL, 1 << 6); static SENSOR_DEVICE_ATTR(in0_crit_max_alarm, S_IRUGO, ina209_show_alarm, NULL, 1 << 7); /* Bus voltage, history, limits, alarms */ static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, ina209_show_value, NULL, INA209_BUS_VOLTAGE); static SENSOR_DEVICE_ATTR(in1_input_highest, S_IRUGO, ina209_show_value, NULL, INA209_BUS_VOLTAGE_MAX_PEAK); static SENSOR_DEVICE_ATTR(in1_input_lowest, S_IRUGO, ina209_show_value, NULL, INA209_BUS_VOLTAGE_MIN_PEAK); static SENSOR_DEVICE_ATTR(in1_reset_history, S_IWUSR, NULL, ina209_reset_history, (1 << 2) | (1 << 3)); static SENSOR_DEVICE_ATTR(in1_max, S_IRUGO | S_IWUSR, ina209_show_value, ina209_set_value, INA209_BUS_VOLTAGE_OVER_WARN); static SENSOR_DEVICE_ATTR(in1_min, S_IRUGO | S_IWUSR, ina209_show_value, ina209_set_value, INA209_BUS_VOLTAGE_UNDER_WARN); static SENSOR_DEVICE_ATTR(in1_crit_max, S_IRUGO | S_IWUSR, ina209_show_value, ina209_set_value, INA209_BUS_VOLTAGE_OVER_LIMIT); static SENSOR_DEVICE_ATTR(in1_crit_min, S_IRUGO | S_IWUSR, ina209_show_value, ina209_set_value, INA209_BUS_VOLTAGE_UNDER_LIMIT); static SENSOR_DEVICE_ATTR(in1_min_alarm, S_IRUGO, ina209_show_alarm, NULL, 1 << 14); static SENSOR_DEVICE_ATTR(in1_max_alarm, S_IRUGO, ina209_show_alarm, NULL, 1 << 15); static SENSOR_DEVICE_ATTR(in1_crit_min_alarm, S_IRUGO, ina209_show_alarm, NULL, 1 << 9); static SENSOR_DEVICE_ATTR(in1_crit_max_alarm, S_IRUGO, ina209_show_alarm, NULL, 1 << 10); /* Power */ static SENSOR_DEVICE_ATTR(power1_input, S_IRUGO, ina209_show_value, NULL, INA209_POWER); static SENSOR_DEVICE_ATTR(power1_input_highest, S_IRUGO, ina209_show_value, NULL, INA209_POWER_PEAK); static SENSOR_DEVICE_ATTR(power1_reset_history, S_IWUSR, NULL, ina209_reset_history, 1 << 4); static SENSOR_DEVICE_ATTR(power1_max, S_IRUGO | S_IWUSR, ina209_show_value, ina209_set_value, INA209_POWER_WARN); static SENSOR_DEVICE_ATTR(power1_crit, S_IRUGO | S_IWUSR, ina209_show_value, ina209_set_value, INA209_POWER_OVER_LIMIT); static SENSOR_DEVICE_ATTR(power1_max_alarm, S_IRUGO, ina209_show_alarm, NULL, 1 << 13); static SENSOR_DEVICE_ATTR(power1_crit_alarm, S_IRUGO, ina209_show_alarm, NULL, 1 << 8); /* Current */ static SENSOR_DEVICE_ATTR(curr1_input, S_IRUGO, ina209_show_value, NULL, INA209_CURRENT); static SENSOR_DEVICE_ATTR(update_interval, S_IRUGO | S_IWUSR, ina209_show_interval, ina209_set_interval, 0); /* * Finally, construct an array of pointers to members of the above objects, * as required for sysfs_create_group() */ static struct attribute *ina209_attrs[] = { &sensor_dev_attr_in0_input.dev_attr.attr, &sensor_dev_attr_in0_input_highest.dev_attr.attr, &sensor_dev_attr_in0_input_lowest.dev_attr.attr, &sensor_dev_attr_in0_reset_history.dev_attr.attr, &sensor_dev_attr_in0_max.dev_attr.attr, &sensor_dev_attr_in0_min.dev_attr.attr, &sensor_dev_attr_in0_crit_max.dev_attr.attr, &sensor_dev_attr_in0_crit_min.dev_attr.attr, &sensor_dev_attr_in0_max_alarm.dev_attr.attr, &sensor_dev_attr_in0_min_alarm.dev_attr.attr, &sensor_dev_attr_in0_crit_max_alarm.dev_attr.attr, &sensor_dev_attr_in0_crit_min_alarm.dev_attr.attr, &sensor_dev_attr_in1_input.dev_attr.attr, &sensor_dev_attr_in1_input_highest.dev_attr.attr, &sensor_dev_attr_in1_input_lowest.dev_attr.attr, &sensor_dev_attr_in1_reset_history.dev_attr.attr, &sensor_dev_attr_in1_max.dev_attr.attr, &sensor_dev_attr_in1_min.dev_attr.attr, &sensor_dev_attr_in1_crit_max.dev_attr.attr, &sensor_dev_attr_in1_crit_min.dev_attr.attr, &sensor_dev_attr_in1_max_alarm.dev_attr.attr, &sensor_dev_attr_in1_min_alarm.dev_attr.attr, &sensor_dev_attr_in1_crit_max_alarm.dev_attr.attr, &sensor_dev_attr_in1_crit_min_alarm.dev_attr.attr, &sensor_dev_attr_power1_input.dev_attr.attr, &sensor_dev_attr_power1_input_highest.dev_attr.attr, &sensor_dev_attr_power1_reset_history.dev_attr.attr, &sensor_dev_attr_power1_max.dev_attr.attr, &sensor_dev_attr_power1_crit.dev_attr.attr, &sensor_dev_attr_power1_max_alarm.dev_attr.attr, &sensor_dev_attr_power1_crit_alarm.dev_attr.attr, &sensor_dev_attr_curr1_input.dev_attr.attr, &sensor_dev_attr_update_interval.dev_attr.attr, NULL, }; ATTRIBUTE_GROUPS(ina209);
static void ina209_restore_conf(struct i2c_client *client, struct ina209_data *data) { /* Restore initial configuration */ i2c_smbus_write_word_swapped(client, INA209_CONFIGURATION, data->config_orig); i2c_smbus_write_word_swapped(client, INA209_CALIBRATION, data->calibration_orig); }

Contributors

PersonTokensPropCommitsCommitProp
Guenter Roeck39100.00%1100.00%
Total39100.00%1100.00%


static int ina209_init_client(struct i2c_client *client, struct ina209_data *data) { struct ina2xx_platform_data *pdata = dev_get_platdata(&client->dev); u32 shunt; int reg; reg = i2c_smbus_read_word_swapped(client, INA209_CALIBRATION); if (reg < 0) return reg; data->calibration_orig = reg; reg = i2c_smbus_read_word_swapped(client, INA209_CONFIGURATION); if (reg < 0) return reg; data->config_orig = reg; if (pdata) { if (pdata->shunt_uohms <= 0) return -EINVAL; shunt = pdata->shunt_uohms; } else if (!of_property_read_u32(client->dev.of_node, "shunt-resistor", &shunt)) { if (shunt == 0) return -EINVAL; } else { shunt = data->calibration_orig ? 40960000 / data->calibration_orig : INA209_SHUNT_DEFAULT; } i2c_smbus_write_word_swapped(client, INA209_CONFIGURATION, INA209_CONFIG_DEFAULT); data->update_interval = ina209_interval_from_reg(INA209_CONFIG_DEFAULT); /* * Calibrate current LSB to 1mA. Shunt is in uOhms. * See equation 13 in datasheet. */ i2c_smbus_write_word_swapped(client, INA209_CALIBRATION, clamp_val(40960000 / shunt, 1, 65535)); /* Clear status register */ i2c_smbus_read_word_swapped(client, INA209_STATUS); return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Guenter Roeck202100.00%1100.00%
Total202100.00%1100.00%


static int ina209_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct i2c_adapter *adapter = client->adapter; struct ina209_data *data; struct device *hwmon_dev; int ret; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA)) return -ENODEV; data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL); if (!data) return -ENOMEM; i2c_set_clientdata(client, data); data->client = client; mutex_init(&data->update_lock); ret = ina209_init_client(client, data); if (ret) return ret; hwmon_dev = devm_hwmon_device_register_with_groups(&client->dev, client->name, data, ina209_groups); if (IS_ERR(hwmon_dev)) { ret = PTR_ERR(hwmon_dev); goto out_restore_conf; } return 0; out_restore_conf: ina209_restore_conf(client, data); return ret; }

Contributors

PersonTokensPropCommitsCommitProp
Guenter Roeck169100.00%2100.00%
Total169100.00%2100.00%


static int ina209_remove(struct i2c_client *client) { struct ina209_data *data = i2c_get_clientdata(client); ina209_restore_conf(client, data); return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Guenter Roeck31100.00%1100.00%
Total31100.00%1100.00%

static const struct i2c_device_id ina209_id[] = { { "ina209", 0 }, { } }; MODULE_DEVICE_TABLE(i2c, ina209_id); static const struct of_device_id ina209_of_match[] = { { .compatible = "ti,ina209" }, { }, }; MODULE_DEVICE_TABLE(of, ina209_of_match); /* This is the driver that will be inserted */ static struct i2c_driver ina209_driver = { .class = I2C_CLASS_HWMON, .driver = { .name = "ina209", .of_match_table = of_match_ptr(ina209_of_match), }, .probe = ina209_probe, .remove = ina209_remove, .id_table = ina209_id, }; module_i2c_driver(ina209_driver); MODULE_AUTHOR("Ira W. Snyder <iws@ovro.caltech.edu>, Paul Hays <Paul.Hays@cattail.ca>, Guenter Roeck <linux@roeck-us.net>"); MODULE_DESCRIPTION("INA209 driver"); MODULE_LICENSE("GPL");

Overall Contributors

PersonTokensPropCommitsCommitProp
Guenter Roeck272798.59%250.00%
Javier Martinez Canillas331.19%125.00%
Joe Schaack60.22%125.00%
Total2766100.00%4100.00%
Directory: drivers/hwmon
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with cregit.