cregit-Linux how code gets into the kernel

Release 4.14 drivers/ide/ali14xx.c

Directory: drivers/ide
/*
 *  Copyright (C) 1996  Linus Torvalds & author (see below)
 */

/*
 * ALI M14xx chipset EIDE controller
 *
 * Works for ALI M1439/1443/1445/1487/1489 chipsets.
 *
 * Adapted from code developed by derekn@vw.ece.cmu.edu.  -ml
 * Derek's notes follow:
 *
 * I think the code should be pretty understandable,
 * but I'll be happy to (try to) answer questions.
 *
 * The critical part is in the setupDrive function.  The initRegisters
 * function doesn't seem to be necessary, but the DOS driver does it, so
 * I threw it in.
 *
 * I've only tested this on my system, which only has one disk.  I posted
 * it to comp.sys.linux.hardware, so maybe some other people will try it
 * out.
 *
 * Derek Noonburg  (derekn@ece.cmu.edu)
 * 95-sep-26
 *
 * Update 96-jul-13:
 *
 * I've since upgraded to two disks and a CD-ROM, with no trouble, and
 * I've also heard from several others who have used it successfully.
 * This driver appears to work with both the 1443/1445 and the 1487/1489
 * chipsets.  I've added support for PIO mode 4 for the 1487.  This
 * seems to work just fine on the 1443 also, although I'm not sure it's
 * advertised as supporting mode 4.  (I've been running a WDC AC21200 in
 * mode 4 for a while now with no trouble.)  -Derek
 */

#include <linux/module.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/timer.h>
#include <linux/mm.h>
#include <linux/ioport.h>
#include <linux/blkdev.h>
#include <linux/ide.h>
#include <linux/init.h>

#include <asm/io.h>


#define DRV_NAME "ali14xx"

/* port addresses for auto-detection */

#define ALI_NUM_PORTS 4

static const int ports[ALI_NUM_PORTS] __initconst =
	{ 0x074, 0x0f4, 0x034, 0x0e4 };

/* register initialization data */



typedef struct { u8 reg, data; } RegInitializer;


static const RegInitializer initData[] __initconst = {
	{0x01, 0x0f}, {0x02, 0x00}, {0x03, 0x00}, {0x04, 0x00},
	{0x05, 0x00}, {0x06, 0x00}, {0x07, 0x2b}, {0x0a, 0x0f},
	{0x25, 0x00}, {0x26, 0x00}, {0x27, 0x00}, {0x28, 0x00},
	{0x29, 0x00}, {0x2a, 0x00}, {0x2f, 0x00}, {0x2b, 0x00},
	{0x2c, 0x00}, {0x2d, 0x00}, {0x2e, 0x00}, {0x30, 0x00},
	{0x31, 0x00}, {0x32, 0x00}, {0x33, 0x00}, {0x34, 0xff},
	{0x35, 0x03}, {0x00, 0x00}
};

/* timing parameter registers for each drive */





static struct { u8 reg1, reg2, reg3, reg4; } regTab[4] = {
	{0x03, 0x26, 0x04, 0x27},     /* drive 0 */
	{0x05, 0x28, 0x06, 0x29},     /* drive 1 */
	{0x2b, 0x30, 0x2c, 0x31},     /* drive 2 */
	{0x2d, 0x32, 0x2e, 0x33},     /* drive 3 */
};


static int basePort;	
/* base port address */

static int regPort;	
/* port for register number */

static int dataPort;	
/* port for register data */

static u8 regOn;	
/* output to base port to access registers */

static u8 regOff;	
/* output to base port to close registers */

/*------------------------------------------------------------------------*/

/*
 * Read a controller register.
 */

static inline u8 inReg(u8 reg) { outb_p(reg, regPort); return inb(dataPort); }

Contributors

PersonTokensPropCommitsCommitProp
Jens Axboe23100.00%2100.00%
Total23100.00%2100.00%

/* * Write a controller register. */
static void outReg(u8 data, u8 reg) { outb_p(reg, regPort); outb_p(data, dataPort); }

Contributors

PersonTokensPropCommitsCommitProp
Jens Axboe26100.00%2100.00%
Total26100.00%2100.00%

static DEFINE_SPINLOCK(ali14xx_lock); /* * Set PIO mode for the specified drive. * This function computes timing parameters * and sets controller registers accordingly. */
static void ali14xx_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) { int driveNum; int time1, time2; u8 param1, param2, param3, param4; unsigned long flags; int bus_speed = ide_vlb_clk ? ide_vlb_clk : 50; const u8 pio = drive->pio_mode - XFER_PIO_0; struct ide_timing *t = ide_timing_find_mode(XFER_PIO_0 + pio); /* calculate timing, according to PIO mode */ time1 = ide_pio_cycle_time(drive, pio); time2 = t->active; param3 = param1 = (time2 * bus_speed + 999) / 1000; param4 = param2 = (time1 * bus_speed + 999) / 1000 - param1; if (pio < 3) { param3 += 8; param4 += 8; } printk(KERN_DEBUG "%s: PIO mode%d, t1=%dns, t2=%dns, cycles = %d+%d, %d+%d\n", drive->name, pio, time1, time2, param1, param2, param3, param4); /* stuff timing parameters into controller registers */ driveNum = (drive->hwif->index << 1) + (drive->dn & 1); spin_lock_irqsave(&ali14xx_lock, flags); outb_p(regOn, basePort); outReg(param1, regTab[driveNum].reg1); outReg(param2, regTab[driveNum].reg2); outReg(param3, regTab[driveNum].reg3); outReg(param4, regTab[driveNum].reg4); outb_p(regOff, basePort); spin_unlock_irqrestore(&ali14xx_lock, flags); }

Contributors

PersonTokensPropCommitsCommitProp
Jens Axboe20180.08%220.00%
Bartlomiej Zolnierkiewicz5019.92%880.00%
Total251100.00%10100.00%

/* * Auto-detect the IDE controller port. */
static int __init findPort(void) { int i; u8 t; unsigned long flags; local_irq_save(flags); for (i = 0; i < ALI_NUM_PORTS; ++i) { basePort = ports[i]; regOff = inb(basePort); for (regOn = 0x30; regOn <= 0x33; ++regOn) { outb_p(regOn, basePort); if (inb(basePort) == regOn) { regPort = basePort + 4; dataPort = basePort + 8; t = inReg(0) & 0xf0; outb_p(regOff, basePort); local_irq_restore(flags); if (t != 0x50) return 0; return 1; /* success */ } } outb_p(regOff, basePort); } local_irq_restore(flags); return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Jens Axboe147100.00%2100.00%
Total147100.00%2100.00%

/* * Initialize controller registers with default values. */
static int __init initRegisters(void) { const RegInitializer *p; u8 t; unsigned long flags; local_irq_save(flags); outb_p(regOn, basePort); for (p = initData; p->reg != 0; ++p) outReg(p->data, p->reg); outb_p(0x01, regPort); t = inb(regPort) & 0x01; outb_p(regOff, basePort); local_irq_restore(flags); return t; }

Contributors

PersonTokensPropCommitsCommitProp
Jens Axboe8998.89%266.67%
Bartlomiej Zolnierkiewicz11.11%133.33%
Total90100.00%3100.00%

static const struct ide_port_ops ali14xx_port_ops = { .set_pio_mode = ali14xx_set_pio_mode, }; static const struct ide_port_info ali14xx_port_info = { .name = DRV_NAME, .chipset = ide_ali14xx, .port_ops = &ali14xx_port_ops, .host_flags = IDE_HFLAG_NO_DMA, .pio_mask = ATA_PIO4, };
static int __init ali14xx_probe(void) { printk(KERN_DEBUG "ali14xx: base=0x%03x, regOn=0x%02x.\n", basePort, regOn); /* initialize controller registers */ if (!initRegisters()) { printk(KERN_ERR "ali14xx: Chip initialization failed.\n"); return 1; } return ide_legacy_device_add(&ali14xx_port_info, 0); }

Contributors

PersonTokensPropCommitsCommitProp
Bartlomiej Zolnierkiewicz2554.35%571.43%
Jens Axboe2145.65%228.57%
Total46100.00%7100.00%

static bool probe_ali14xx; module_param_named(probe, probe_ali14xx, bool, 0); MODULE_PARM_DESC(probe, "probe for ALI M14xx chipsets");
static int __init ali14xx_init(void) { if (probe_ali14xx == 0) goto out; /* auto-detect IDE controller port */ if (findPort()) { if (ali14xx_probe()) return -ENODEV; return 0; } printk(KERN_ERR "ali14xx: not found.\n"); out: return -ENODEV; }

Contributors

PersonTokensPropCommitsCommitProp
Bartlomiej Zolnierkiewicz3672.00%360.00%
Jens Axboe1428.00%240.00%
Total50100.00%5100.00%

module_init(ali14xx_init); MODULE_AUTHOR("see local file"); MODULE_DESCRIPTION("support of ALI 14XX IDE chipsets"); MODULE_LICENSE("GPL");

Overall Contributors

PersonTokensPropCommitsCommitProp
Jens Axboe86180.85%28.33%
Bartlomiej Zolnierkiewicz20118.87%2083.33%
Andi Kleen20.19%14.17%
Rusty Russell10.09%14.17%
Total1065100.00%24100.00%
Directory: drivers/ide
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with cregit.