cregit-Linux how code gets into the kernel

Release 4.14 drivers/ide/pdc202xx_new.c

Directory: drivers/ide
/*
 *  Promise TX2/TX4/TX2000/133 IDE driver
 *
 *  This program is free software; you can redistribute it and/or
 *  modify it under the terms of the GNU General Public License
 *  as published by the Free Software Foundation; either version
 *  2 of the License, or (at your option) any later version.
 *
 *  Split from:
 *  linux/drivers/ide/pdc202xx.c        Version 0.35    Mar. 30, 2002
 *  Copyright (C) 1998-2002             Andre Hedrick <andre@linux-ide.org>
 *  Copyright (C) 2005-2007             MontaVista Software, Inc.
 *  Portions Copyright (C) 1999 Promise Technology, Inc.
 *  Author: Frank Tiernan (frankt@promise.com)
 *  Released under terms of General Public License
 */

#include <linux/module.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/ide.h>
#include <linux/ktime.h>

#include <asm/io.h>

#ifdef CONFIG_PPC_PMAC
#include <asm/prom.h>
#endif


#define DRV_NAME "pdc202xx_new"


#undef DEBUG

#ifdef DEBUG

#define DBG(fmt, args...) printk("%s: " fmt, __func__, ## args)
#else

#define DBG(fmt, args...)
#endif


static u8 max_dma_rate(struct pci_dev *pdev) { u8 mode; switch(pdev->device) { case PCI_DEVICE_ID_PROMISE_20277: case PCI_DEVICE_ID_PROMISE_20276: case PCI_DEVICE_ID_PROMISE_20275: case PCI_DEVICE_ID_PROMISE_20271: case PCI_DEVICE_ID_PROMISE_20269: mode = 4; break; case PCI_DEVICE_ID_PROMISE_20270: case PCI_DEVICE_ID_PROMISE_20268: mode = 3; break; default: return 0; } return mode; }

Contributors

PersonTokensPropCommitsCommitProp
Jens Axboe5185.00%150.00%
Sergei Shtylyov915.00%150.00%
Total60100.00%2100.00%

/** * get_indexed_reg - Get indexed register * @hwif: for the port address * @index: index of the indexed register */
static u8 get_indexed_reg(ide_hwif_t *hwif, u8 index) { u8 value; outb(index, hwif->dma_base + 1); value = inb(hwif->dma_base + 3); DBG("index[%02X] value[%02X]\n", index, value); return value; }

Contributors

PersonTokensPropCommitsCommitProp
Sergei Shtylyov2856.00%125.00%
Jens Axboe1428.00%125.00%
Bartlomiej Zolnierkiewicz816.00%250.00%
Total50100.00%4100.00%

/** * set_indexed_reg - Set indexed register * @hwif: for the port address * @index: index of the indexed register */
static void set_indexed_reg(ide_hwif_t *hwif, u8 index, u8 value) { outb(index, hwif->dma_base + 1); outb(value, hwif->dma_base + 3); DBG("index[%02X] value[%02X]\n", index, value); }

Contributors

PersonTokensPropCommitsCommitProp
Sergei Shtylyov2451.06%125.00%
Jens Axboe1531.91%125.00%
Bartlomiej Zolnierkiewicz817.02%250.00%
Total47100.00%4100.00%

/* * ATA Timing Tables based on 133 MHz PLL output clock. * * If the PLL outputs 100 MHz clock, the ASIC hardware will set * the timing registers automatically when "set features" command is * issued to the device. However, if the PLL output clock is 133 MHz, * the following tables must be used. */ static struct pio_timing { u8 reg0c, reg0d, reg13; } pio_timings [] = { { 0xfb, 0x2b, 0xac }, /* PIO mode 0, IORDY off, Prefetch off */ { 0x46, 0x29, 0xa4 }, /* PIO mode 1, IORDY off, Prefetch off */ { 0x23, 0x26, 0x64 }, /* PIO mode 2, IORDY off, Prefetch off */ { 0x27, 0x0d, 0x35 }, /* PIO mode 3, IORDY on, Prefetch off */ { 0x23, 0x09, 0x25 }, /* PIO mode 4, IORDY on, Prefetch off */ }; static struct mwdma_timing { u8 reg0e, reg0f; } mwdma_timings [] = { { 0xdf, 0x5f }, /* MWDMA mode 0 */ { 0x6b, 0x27 }, /* MWDMA mode 1 */ { 0x69, 0x25 }, /* MWDMA mode 2 */ }; static struct udma_timing { u8 reg10, reg11, reg12; } udma_timings [] = { { 0x4a, 0x0f, 0xd5 }, /* UDMA mode 0 */ { 0x3a, 0x0a, 0xd0 }, /* UDMA mode 1 */ { 0x2a, 0x07, 0xcd }, /* UDMA mode 2 */ { 0x1a, 0x05, 0xcd }, /* UDMA mode 3 */ { 0x1a, 0x03, 0xcd }, /* UDMA mode 4 */ { 0x1a, 0x02, 0xcb }, /* UDMA mode 5 */ { 0x1a, 0x01, 0xcb }, /* UDMA mode 6 */ };
static void pdcnew_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) { struct pci_dev *dev = to_pci_dev(hwif->dev); u8 adj = (drive->dn & 1) ? 0x08 : 0x00; const u8 speed = drive->dma_mode; /* * IDE core issues SETFEATURES_XFER to the drive first (thanks to * IDE_HFLAG_POST_SET_MODE in ->host_flags). PDC202xx hardware will * automatically set the timing registers based on 100 MHz PLL output. * * As we set up the PLL to output 133 MHz for UltraDMA/133 capable * chips, we must override the default register settings... */ if (max_dma_rate(dev) == 4) { u8 mode = speed & 0x07; if (speed >= XFER_UDMA_0) { set_indexed_reg(hwif, 0x10 + adj, udma_timings[mode].reg10); set_indexed_reg(hwif, 0x11 + adj, udma_timings[mode].reg11); set_indexed_reg(hwif, 0x12 + adj, udma_timings[mode].reg12); } else { set_indexed_reg(hwif, 0x0e + adj, mwdma_timings[mode].reg0e); set_indexed_reg(hwif, 0x0f + adj, mwdma_timings[mode].reg0f); } } else if (speed == XFER_UDMA_2) { /* Set tHOLD bit to 0 if using UDMA mode 2 */ u8 tmp = get_indexed_reg(hwif, 0x10 + adj); set_indexed_reg(hwif, 0x10 + adj, tmp & 0x7f); } }

Contributors

PersonTokensPropCommitsCommitProp
Sergei Shtylyov13569.59%114.29%
Bartlomiej Zolnierkiewicz3417.53%571.43%
Jens Axboe2512.89%114.29%
Total194100.00%7100.00%


static void pdcnew_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) { struct pci_dev *dev = to_pci_dev(hwif->dev); u8 adj = (drive->dn & 1) ? 0x08 : 0x00; const u8 pio = drive->pio_mode - XFER_PIO_0; if (max_dma_rate(dev) == 4) { set_indexed_reg(hwif, 0x0c + adj, pio_timings[pio].reg0c); set_indexed_reg(hwif, 0x0d + adj, pio_timings[pio].reg0d); set_indexed_reg(hwif, 0x13 + adj, pio_timings[pio].reg13); } }

Contributors

PersonTokensPropCommitsCommitProp
Bartlomiej Zolnierkiewicz9687.27%571.43%
Jens Axboe1210.91%114.29%
Sergei Shtylyov21.82%114.29%
Total110100.00%7100.00%


static u8 pdcnew_cable_detect(ide_hwif_t *hwif) { if (get_indexed_reg(hwif, 0x0b) & 0x04) return ATA_CBL_PATA40; else return ATA_CBL_PATA80; }

Contributors

PersonTokensPropCommitsCommitProp
Jens Axboe1553.57%133.33%
Bartlomiej Zolnierkiewicz932.14%133.33%
Sergei Shtylyov414.29%133.33%
Total28100.00%3100.00%


static void pdcnew_reset(ide_drive_t *drive) { /* * Deleted this because it is redundant from the caller. */ printk(KERN_WARNING "pdc202xx_new: %s channel reset.\n", drive->hwif->channel ? "Secondary" : "Primary"); }

Contributors

PersonTokensPropCommitsCommitProp
Sergei Shtylyov1451.85%133.33%
Jens Axboe1140.74%133.33%
Bartlomiej Zolnierkiewicz27.41%133.33%
Total27100.00%3100.00%

/** * read_counter - Read the byte count registers * @dma_base: for the port address */
static long read_counter(u32 dma_base) { u32 pri_dma_base = dma_base, sec_dma_base = dma_base + 0x08; u8 cnt0, cnt1, cnt2, cnt3; long count = 0, last; int retry = 3; do { last = count; /* Read the current count */ outb(0x20, pri_dma_base + 0x01); cnt0 = inb(pri_dma_base + 0x03); outb(0x21, pri_dma_base + 0x01); cnt1 = inb(pri_dma_base + 0x03); outb(0x20, sec_dma_base + 0x01); cnt2 = inb(sec_dma_base + 0x03); outb(0x21, sec_dma_base + 0x01); cnt3 = inb(sec_dma_base + 0x03); count = (cnt3 << 23) | (cnt2 << 15) | (cnt1 << 8) | cnt0; /* * The 30-bit decrementing counter is read in 4 pieces. * Incorrect value may be read when the most significant bytes * are changing... */ } while (retry-- && (((last ^ count) & 0x3fff8000) || last < count)); DBG("cnt0[%02X] cnt1[%02X] cnt2[%02X] cnt3[%02X]\n", cnt0, cnt1, cnt2, cnt3); return count; }

Contributors

PersonTokensPropCommitsCommitProp
Sergei Shtylyov182100.00%1100.00%
Total182100.00%1100.00%

/** * detect_pll_input_clock - Detect the PLL input clock in Hz. * @dma_base: for the port address * E.g. 16949000 on 33 MHz PCI bus, i.e. half of the PCI clock. */
static long detect_pll_input_clock(unsigned long dma_base) { ktime_t start_time, end_time; long start_count, end_count; long pll_input, usec_elapsed; u8 scr1; start_count = read_counter(dma_base); start_time = ktime_get(); /* Start the test mode */ outb(0x01, dma_base + 0x01); scr1 = inb(dma_base + 0x03); DBG("scr1[%02X]\n", scr1); outb(scr1 | 0x40, dma_base + 0x03); /* Let the counter run for 10 ms. */ mdelay(10); end_count = read_counter(dma_base); end_time = ktime_get(); /* Stop the test mode */ outb(0x01, dma_base + 0x01); scr1 = inb(dma_base + 0x03); DBG("scr1[%02X]\n", scr1); outb(scr1 & ~0x40, dma_base + 0x03); /* * Calculate the input clock in Hz * (the clock counter is 30 bit wide and counts down) */ usec_elapsed = ktime_us_delta(end_time, start_time); pll_input = ((start_count - end_count) & 0x3fffffff) / 10 * (10000000 / usec_elapsed); DBG("start[%ld] end[%ld]\n", start_count, end_count); return pll_input; }

Contributors

PersonTokensPropCommitsCommitProp
Sergei Shtylyov13778.29%120.00%
Albert Lee2212.57%120.00%
Amitoj Kaur Chawla116.29%120.00%
Jens Axboe42.29%120.00%
Mikael Pettersson10.57%120.00%
Total175100.00%5100.00%

#ifdef CONFIG_PPC_PMAC
static void apple_kiwi_init(struct pci_dev *pdev) { struct device_node *np = pci_device_to_OF_node(pdev); u8 conf; if (np == NULL || !of_device_is_compatible(np, "kiwi-root")) return; if (pdev->revision >= 0x03) { /* Setup chip magic config stuff (from darwin) */ pci_read_config_byte (pdev, 0x40, &conf); pci_write_config_byte(pdev, 0x40, (conf | 0x01)); } }

Contributors

PersonTokensPropCommitsCommitProp
Sergei Shtylyov3649.32%125.00%
Andrew Morton3345.21%125.00%
Bartlomiej Zolnierkiewicz34.11%125.00%
Stephen Rothwell11.37%125.00%
Total73100.00%4100.00%

#endif /* CONFIG_PPC_PMAC */
static int init_chipset_pdcnew(struct pci_dev *dev) { const char *name = DRV_NAME; unsigned long dma_base = pci_resource_start(dev, 4); unsigned long sec_dma_base = dma_base + 0x08; long pll_input, pll_output, ratio; int f, r; u8 pll_ctl0, pll_ctl1; if (dma_base == 0) return -EFAULT; #ifdef CONFIG_PPC_PMAC apple_kiwi_init(dev); #endif /* Calculate the required PLL output frequency */ switch(max_dma_rate(dev)) { case 4: /* it's 133 MHz for Ultra133 chips */ pll_output = 133333333; break; case 3: /* and 100 MHz for Ultra100 chips */ default: pll_output = 100000000; break; } /* * Detect PLL input clock. * On some systems, where PCI bus is running at non-standard clock rate * (e.g. 25 or 40 MHz), we have to adjust the cycle time. * PDC20268 and newer chips employ PLL circuit to help correct timing * registers setting. */ pll_input = detect_pll_input_clock(dma_base); printk(KERN_INFO "%s %s: PLL input clock is %ld kHz\n", name, pci_name(dev), pll_input / 1000); /* Sanity check */ if (unlikely(pll_input < 5000000L || pll_input > 70000000L)) { printk(KERN_ERR "%s %s: Bad PLL input clock %ld Hz, giving up!" "\n", name, pci_name(dev), pll_input); goto out; } #ifdef DEBUG DBG("pll_output is %ld Hz\n", pll_output); /* Show the current clock value of PLL control register * (maybe already configured by the BIOS) */ outb(0x02, sec_dma_base + 0x01); pll_ctl0 = inb(sec_dma_base + 0x03); outb(0x03, sec_dma_base + 0x01); pll_ctl1 = inb(sec_dma_base + 0x03); DBG("pll_ctl[%02X][%02X]\n", pll_ctl0, pll_ctl1); #endif /* * Calculate the ratio of F, R and NO * POUT = (F + 2) / (( R + 2) * NO) */ ratio = pll_output / (pll_input / 1000); if (ratio < 8600L) { /* 8.6x */ /* Using NO = 0x01, R = 0x0d */ r = 0x0d; } else if (ratio < 12900L) { /* 12.9x */ /* Using NO = 0x01, R = 0x08 */ r = 0x08; } else if (ratio < 16100L) { /* 16.1x */ /* Using NO = 0x01, R = 0x06 */ r = 0x06; } else if (ratio < 64000L) { /* 64x */ r = 0x00; } else { /* Invalid ratio */ printk(KERN_ERR "%s %s: Bad ratio %ld, giving up!\n", name, pci_name(dev), ratio); goto out; } f = (ratio * (r + 2)) / 1000 - 2; DBG("F[%d] R[%d] ratio*1000[%ld]\n", f, r, ratio); if (unlikely(f < 0 || f > 127)) { /* Invalid F */ printk(KERN_ERR "%s %s: F[%d] invalid!\n", name, pci_name(dev), f); goto out; } pll_ctl0 = (u8) f; pll_ctl1 = (u8) r; DBG("Writing pll_ctl[%02X][%02X]\n", pll_ctl0, pll_ctl1); outb(0x02, sec_dma_base + 0x01); outb(pll_ctl0, sec_dma_base + 0x03); outb(0x03, sec_dma_base + 0x01); outb(pll_ctl1, sec_dma_base + 0x03); /* Wait the PLL circuit to be stable */ mdelay(30); #ifdef DEBUG /* * Show the current clock value of PLL control register */ outb(0x02, sec_dma_base + 0x01); pll_ctl0 = inb(sec_dma_base + 0x03); outb(0x03, sec_dma_base + 0x01); pll_ctl1 = inb(sec_dma_base + 0x03); DBG("pll_ctl[%02X][%02X]\n", pll_ctl0, pll_ctl1); #endif out: return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Sergei Shtylyov38678.14%114.29%
Andrew Morton5611.34%114.29%
Bartlomiej Zolnierkiewicz428.50%457.14%
Jens Axboe102.02%114.29%
Total494100.00%7100.00%


static struct pci_dev *pdc20270_get_dev2(struct pci_dev *dev) { struct pci_dev *dev2; dev2 = pci_get_slot(dev->bus, PCI_DEVFN(PCI_SLOT(dev->devfn) + 1, PCI_FUNC(dev->devfn))); if (dev2 && dev2->vendor == dev->vendor && dev2->device == dev->device) { if (dev2->irq != dev->irq) { dev2->irq = dev->irq; printk(KERN_INFO DRV_NAME " %s: PCI config space " "interrupt fixed\n", pci_name(dev)); } return dev2; } return NULL; }

Contributors

PersonTokensPropCommitsCommitProp
Jens Axboe4947.57%110.00%
Sergei Shtylyov3332.04%110.00%
Bartlomiej Zolnierkiewicz1312.62%550.00%
Alan Cox54.85%220.00%
Greg Kroah-Hartman32.91%110.00%
Total103100.00%10100.00%

static const struct ide_port_ops pdcnew_port_ops = { .set_pio_mode = pdcnew_set_pio_mode, .set_dma_mode = pdcnew_set_dma_mode, .resetproc = pdcnew_reset, .cable_detect = pdcnew_cable_detect, }; #define DECLARE_PDCNEW_DEV(udma) \ { \ .name = DRV_NAME, \ .init_chipset = init_chipset_pdcnew, \ .port_ops = &pdcnew_port_ops, \ .host_flags = IDE_HFLAG_POST_SET_MODE | \ IDE_HFLAG_ERROR_STOPS_FIFO | \ IDE_HFLAG_OFF_BOARD, \ .pio_mask = ATA_PIO4, \ .mwdma_mask = ATA_MWDMA2, \ .udma_mask = udma, \ } static const struct ide_port_info pdcnew_chipsets[] = { /* 0: PDC202{68,70} */ DECLARE_PDCNEW_DEV(ATA_UDMA5), /* 1: PDC202{69,71,75,76,77} */ DECLARE_PDCNEW_DEV(ATA_UDMA6), }; /** * pdc202new_init_one - called when a pdc202xx is found * @dev: the pdc202new device * @id: the matching pci id * * Called when the PCI registration layer (or the IDE initialization) * finds a device matching our IDE device tables. */
static int pdc202new_init_one(struct pci_dev *dev, const struct pci_device_id *id) { const struct ide_port_info *d = &pdcnew_chipsets[id->driver_data]; struct pci_dev *bridge = dev->bus->self; if (dev->device == PCI_DEVICE_ID_PROMISE_20270 && bridge && bridge->vendor == PCI_VENDOR_ID_DEC && bridge->device == PCI_DEVICE_ID_DEC_21150) { struct pci_dev *dev2; if (PCI_SLOT(dev->devfn) & 2) return -ENODEV; dev2 = pdc20270_get_dev2(dev); if (dev2) { int ret = ide_pci_init_two(dev, dev2, d, NULL); if (ret < 0) pci_dev_put(dev2); return ret; } } if (dev->device == PCI_DEVICE_ID_PROMISE_20276 && bridge && bridge->vendor == PCI_VENDOR_ID_INTEL && (bridge->device == PCI_DEVICE_ID_INTEL_I960 || bridge->device == PCI_DEVICE_ID_INTEL_I960RM)) { printk(KERN_INFO DRV_NAME " %s: attached to I2O RAID controller," " skipping\n", pci_name(dev)); return -ENODEV; } return ide_pci_init_one(dev, d, NULL); }

Contributors

PersonTokensPropCommitsCommitProp
Bartlomiej Zolnierkiewicz15484.62%777.78%
Jens Axboe2815.38%222.22%
Total182100.00%9100.00%


static void pdc202new_remove(struct pci_dev *dev) { struct ide_host *host = pci_get_drvdata(dev); struct pci_dev *dev2 = host->dev[1] ? to_pci_dev(host->dev[1]) : NULL; ide_pci_remove(dev); pci_dev_put(dev2); }

Contributors

PersonTokensPropCommitsCommitProp
Bartlomiej Zolnierkiewicz55100.00%1100.00%
Total55100.00%1100.00%

static const struct pci_device_id pdc202new_pci_tbl[] = { { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20268), 0 }, { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20269), 1 }, { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20270), 0 }, { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20271), 1 }, { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20275), 1 }, { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20276), 1 }, { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20277), 1 }, { 0, }, }; MODULE_DEVICE_TABLE(pci, pdc202new_pci_tbl); static struct pci_driver pdc202new_pci_driver = { .name = "Promise_IDE", .id_table = pdc202new_pci_tbl, .probe = pdc202new_init_one, .remove = pdc202new_remove, .suspend = ide_pci_suspend, .resume = ide_pci_resume, };
static int __init pdc202new_ide_init(void) { return ide_pci_register_driver(&pdc202new_pci_driver); }

Contributors

PersonTokensPropCommitsCommitProp
Jens Axboe1487.50%250.00%
Bartlomiej Zolnierkiewicz212.50%250.00%
Total16100.00%4100.00%


static void __exit pdc202new_ide_exit(void) { pci_unregister_driver(&pdc202new_pci_driver); }

Contributors

PersonTokensPropCommitsCommitProp
Bartlomiej Zolnierkiewicz15100.00%2100.00%
Total15100.00%2100.00%

module_init(pdc202new_ide_init); module_exit(pdc202new_ide_exit); MODULE_AUTHOR("Andre Hedrick, Frank Tiernan"); MODULE_DESCRIPTION("PCI driver module for Promise PDC20268 and higher"); MODULE_LICENSE("GPL");

Overall Contributors

PersonTokensPropCommitsCommitProp
Sergei Shtylyov120652.69%47.84%
Bartlomiej Zolnierkiewicz56424.64%3364.71%
Jens Axboe35815.64%23.92%
Andrew Morton1004.37%11.96%
Albert Lee220.96%11.96%
Amitoj Kaur Chawla140.61%11.96%
Tejun Heo70.31%11.96%
Luca Tettamanti60.26%11.96%
Alan Cox50.22%23.92%
Greg Kroah-Hartman30.13%11.96%
Stephen Rothwell10.04%11.96%
Mikael Pettersson10.04%11.96%
Harvey Harrison10.04%11.96%
Deepak Saxena10.04%11.96%
Total2289100.00%51100.00%
Directory: drivers/ide
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with cregit.