cregit-Linux how code gets into the kernel

Release 4.14 drivers/ide/setup-pci.c

Directory: drivers/ide
/*
 *  Copyright (C) 1998-2000  Andre Hedrick <andre@linux-ide.org>
 *  Copyright (C) 1995-1998  Mark Lord
 *  Copyright (C) 2007-2009  Bartlomiej Zolnierkiewicz
 *
 *  May be copied or modified under the terms of the GNU General Public License
 */

#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/export.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/ide.h>
#include <linux/dma-mapping.h>

#include <asm/io.h>

/**
 *      ide_setup_pci_baseregs  -       place a PCI IDE controller native
 *      @dev: PCI device of interface to switch native
 *      @name: Name of interface
 *
 *      We attempt to place the PCI interface into PCI native mode. If
 *      we succeed the BARs are ok and the controller is in PCI mode.
 *      Returns 0 on success or an errno code.
 *
 *      FIXME: if we program the interface and then fail to set the BARS
 *      we don't switch it back to legacy mode. Do we actually care ??
 */


static int ide_setup_pci_baseregs(struct pci_dev *dev, const char *name) { u8 progif = 0; /* * Place both IDE interfaces into PCI "native" mode: */ if (pci_read_config_byte(dev, PCI_CLASS_PROG, &progif) || (progif & 5) != 5) { if ((progif & 0xa) != 0xa) { printk(KERN_INFO "%s %s: device not capable of full " "native PCI mode\n", name, pci_name(dev)); return -EOPNOTSUPP; } printk(KERN_INFO "%s %s: placing both ports into native PCI " "mode\n", name, pci_name(dev)); (void) pci_write_config_byte(dev, PCI_CLASS_PROG, progif|5); if (pci_read_config_byte(dev, PCI_CLASS_PROG, &progif) || (progif & 5) != 5) { printk(KERN_ERR "%s %s: rewrite of PROGIF failed, " "wanted 0x%04x, got 0x%04x\n", name, pci_name(dev), progif | 5, progif); return -EOPNOTSUPP; } } return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Jens Axboe13086.09%150.00%
Bartlomiej Zolnierkiewicz2113.91%150.00%
Total151100.00%2100.00%

#ifdef CONFIG_BLK_DEV_IDEDMA_PCI
static int ide_pci_clear_simplex(unsigned long dma_base, const char *name) { u8 dma_stat = inb(dma_base + 2); outb(dma_stat & 0x60, dma_base + 2); dma_stat = inb(dma_base + 2); return (dma_stat & 0x80) ? 1 : 0; }

Contributors

PersonTokensPropCommitsCommitProp
Bartlomiej Zolnierkiewicz56100.00%2100.00%
Total56100.00%2100.00%

/** * ide_pci_dma_base - setup BMIBA * @hwif: IDE interface * @d: IDE port info * * Fetch the DMA Bus-Master-I/O-Base-Address (BMIBA) from PCI space. */
unsigned long ide_pci_dma_base(ide_hwif_t *hwif, const struct ide_port_info *d) { struct pci_dev *dev = to_pci_dev(hwif->dev); unsigned long dma_base = 0; if (hwif->host_flags & IDE_HFLAG_MMIO) return hwif->dma_base; if (hwif->mate && hwif->mate->dma_base) { dma_base = hwif->mate->dma_base - (hwif->channel ? 0 : 8); } else { u8 baridx = (d->host_flags & IDE_HFLAG_CS5520) ? 2 : 4; dma_base = pci_resource_start(dev, baridx); if (dma_base == 0) { printk(KERN_ERR "%s %s: DMA base is invalid\n", d->name, pci_name(dev)); return 0; } } if (hwif->channel) dma_base += 8; return dma_base; }

Contributors

PersonTokensPropCommitsCommitProp
Jens Axboe8055.17%110.00%
Bartlomiej Zolnierkiewicz6544.83%990.00%
Total145100.00%10100.00%

EXPORT_SYMBOL_GPL(ide_pci_dma_base);
int ide_pci_check_simplex(ide_hwif_t *hwif, const struct ide_port_info *d) { struct pci_dev *dev = to_pci_dev(hwif->dev); u8 dma_stat; if (d->host_flags & (IDE_HFLAG_MMIO | IDE_HFLAG_CS5520)) goto out; if (d->host_flags & IDE_HFLAG_CLEAR_SIMPLEX) { if (ide_pci_clear_simplex(hwif->dma_base, d->name)) printk(KERN_INFO "%s %s: simplex device: DMA forced\n", d->name, pci_name(dev)); goto out; } /* * If the device claims "simplex" DMA, this means that only one of * the two interfaces can be trusted with DMA at any point in time * (so we should enable DMA only on one of the two interfaces). * * FIXME: At this point we haven't probed the drives so we can't make * the appropriate decision. Really we should defer this problem until * we tune the drive then try to grab DMA ownership if we want to be * the DMA end. This has to be become dynamic to handle hot-plug. */ dma_stat = hwif->dma_ops->dma_sff_read_status(hwif); if ((dma_stat & 0x80) && hwif->mate && hwif->mate->dma_base) { printk(KERN_INFO "%s %s: simplex device: DMA disabled\n", d->name, pci_name(dev)); return -1; } out: return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Bartlomiej Zolnierkiewicz9466.20%675.00%
Jens Axboe4632.39%112.50%
Sergei Shtylyov21.41%112.50%
Total142100.00%8100.00%

EXPORT_SYMBOL_GPL(ide_pci_check_simplex); /* * Set up BM-DMA capability (PnP BIOS should have done this) */
int ide_pci_set_master(struct pci_dev *dev, const char *name) { u16 pcicmd; pci_read_config_word(dev, PCI_COMMAND, &pcicmd); if ((pcicmd & PCI_COMMAND_MASTER) == 0) { pci_set_master(dev); if (pci_read_config_word(dev, PCI_COMMAND, &pcicmd) || (pcicmd & PCI_COMMAND_MASTER) == 0) { printk(KERN_ERR "%s %s: error updating PCICMD\n", name, pci_name(dev)); return -EIO; } } return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Bartlomiej Zolnierkiewicz87100.00%2100.00%
Total87100.00%2100.00%

EXPORT_SYMBOL_GPL(ide_pci_set_master); #endif /* CONFIG_BLK_DEV_IDEDMA_PCI */
void ide_setup_pci_noise(struct pci_dev *dev, const struct ide_port_info *d) { printk(KERN_INFO "%s %s: IDE controller (0x%04x:0x%04x rev 0x%02x)\n", d->name, pci_name(dev), dev->vendor, dev->device, dev->revision); }

Contributors

PersonTokensPropCommitsCommitProp
Jens Axboe2353.49%120.00%
Bartlomiej Zolnierkiewicz2046.51%480.00%
Total43100.00%5100.00%

EXPORT_SYMBOL_GPL(ide_setup_pci_noise); /** * ide_pci_enable - do PCI enables * @dev: PCI device * @bars: PCI BARs mask * @d: IDE port info * * Enable the IDE PCI device. We attempt to enable the device in full * but if that fails then we only need IO space. The PCI code should * have setup the proper resources for us already for controllers in * legacy mode. * * Returns zero on success or an error code */
static int ide_pci_enable(struct pci_dev *dev, int bars, const struct ide_port_info *d) { int ret; if (pci_enable_device(dev)) { ret = pci_enable_device_io(dev); if (ret < 0) { printk(KERN_WARNING "%s %s: couldn't enable device\n", d->name, pci_name(dev)); goto out; } printk(KERN_WARNING "%s %s: BIOS configuration fixed\n", d->name, pci_name(dev)); } /* * assume all devices can do 32-bit DMA for now, we can add * a DMA mask field to the struct ide_port_info if we need it * (or let lower level driver set the DMA mask) */ ret = dma_set_mask(&dev->dev, DMA_BIT_MASK(32)); if (ret < 0) { printk(KERN_ERR "%s %s: can't set DMA mask\n", d->name, pci_name(dev)); goto out; } ret = pci_request_selected_regions(dev, bars, d->name); if (ret < 0) printk(KERN_ERR "%s %s: can't reserve resources\n", d->name, pci_name(dev)); out: return ret; }

Contributors

PersonTokensPropCommitsCommitProp
Bartlomiej Zolnierkiewicz7747.83%654.55%
Jens Axboe7546.58%218.18%
Quentin Lambert42.48%19.09%
Yang Hongyang42.48%19.09%
Benjamin Herrenschmidt10.62%19.09%
Total161100.00%11100.00%

/** * ide_pci_configure - configure an unconfigured device * @dev: PCI device * @d: IDE port info * * Enable and configure the PCI device we have been passed. * Returns zero on success or an error code. */
static int ide_pci_configure(struct pci_dev *dev, const struct ide_port_info *d) { u16 pcicmd = 0; /* * PnP BIOS was *supposed* to have setup this device, but we * can do it ourselves, so long as the BIOS has assigned an IRQ * (or possibly the device is using a "legacy header" for IRQs). * Maybe the user deliberately *disabled* the device, * but we'll eventually ignore it again if no drives respond. */ if (ide_setup_pci_baseregs(dev, d->name) || pci_write_config_word(dev, PCI_COMMAND, pcicmd | PCI_COMMAND_IO)) { printk(KERN_INFO "%s %s: device disabled (BIOS)\n", d->name, pci_name(dev)); return -ENODEV; } if (pci_read_config_word(dev, PCI_COMMAND, &pcicmd)) { printk(KERN_ERR "%s %s: error accessing PCI regs\n", d->name, pci_name(dev)); return -EIO; } if (!(pcicmd & PCI_COMMAND_IO)) { printk(KERN_ERR "%s %s: unable to enable IDE controller\n", d->name, pci_name(dev)); return -ENXIO; } return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Jens Axboe11184.09%125.00%
Bartlomiej Zolnierkiewicz2115.91%375.00%
Total132100.00%4100.00%

/** * ide_pci_check_iomem - check a register is I/O * @dev: PCI device * @d: IDE port info * @bar: BAR number * * Checks if a BAR is configured and points to MMIO space. If so, * return an error code. Otherwise return 0 */
static int ide_pci_check_iomem(struct pci_dev *dev, const struct ide_port_info *d, int bar) { ulong flags = pci_resource_flags(dev, bar); /* Unconfigured ? */ if (!flags || pci_resource_len(dev, bar) == 0) return 0; /* I/O space */ if (flags & IORESOURCE_IO) return 0; /* Bad */ return -EINVAL; }

Contributors

PersonTokensPropCommitsCommitProp
Jens Axboe5993.65%240.00%
Bartlomiej Zolnierkiewicz34.76%240.00%
Sergei Shtylyov11.59%120.00%
Total63100.00%5100.00%

/** * ide_hw_configure - configure a struct ide_hw instance * @dev: PCI device holding interface * @d: IDE port info * @port: port number * @hw: struct ide_hw instance corresponding to this port * * Perform the initial set up for the hardware interface structure. This * is done per interface port rather than per PCI device. There may be * more than one port per device. * * Returns zero on success or an error code. */
static int ide_hw_configure(struct pci_dev *dev, const struct ide_port_info *d, unsigned int port, struct ide_hw *hw) { unsigned long ctl = 0, base = 0; if ((d->host_flags & IDE_HFLAG_ISA_PORTS) == 0) { if (ide_pci_check_iomem(dev, d, 2 * port) || ide_pci_check_iomem(dev, d, 2 * port + 1)) { printk(KERN_ERR "%s %s: I/O baseregs (BIOS) are " "reported as MEM for port %d!\n", d->name, pci_name(dev), port); return -EINVAL; } ctl = pci_resource_start(dev, 2*port+1); base = pci_resource_start(dev, 2*port); } else { /* Use default values */ ctl = port ? 0x374 : 0x3f4; base = port ? 0x170 : 0x1f0; } if (!base || !ctl) { printk(KERN_ERR "%s %s: bad PCI BARs for port %d, skipping\n", d->name, pci_name(dev), port); return -EINVAL; } memset(hw, 0, sizeof(*hw)); hw->dev = &dev->dev; ide_std_init_ports(hw, base, ctl | 2); return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Jens Axboe9745.97%16.25%
Bartlomiej Zolnierkiewicz7937.44%1275.00%
Sergei Shtylyov188.53%16.25%
David Howells115.21%16.25%
Alan Cox62.84%16.25%
Total211100.00%16100.00%

#ifdef CONFIG_BLK_DEV_IDEDMA_PCI /** * ide_hwif_setup_dma - configure DMA interface * @hwif: IDE interface * @d: IDE port info * * Set up the DMA base for the interface. Enable the master bits as * necessary and attempt to bring the device DMA into a ready to use * state */
int ide_hwif_setup_dma(ide_hwif_t *hwif, const struct ide_port_info *d) { struct pci_dev *dev = to_pci_dev(hwif->dev); if ((d->host_flags & IDE_HFLAG_NO_AUTODMA) == 0 || ((dev->class >> 8) == PCI_CLASS_STORAGE_IDE && (dev->class & 0x80))) { unsigned long base = ide_pci_dma_base(hwif, d); if (base == 0) return -1; hwif->dma_base = base; if (hwif->dma_ops == NULL) hwif->dma_ops = &sff_dma_ops; if (ide_pci_check_simplex(hwif, d) < 0) return -1; if (ide_pci_set_master(dev, d->name) < 0) return -1; if (hwif->host_flags & IDE_HFLAG_MMIO) printk(KERN_INFO " %s: MMIO-DMA\n", hwif->name); else printk(KERN_INFO " %s: BM-DMA at 0x%04lx-0x%04lx\n", hwif->name, base, base + 7); hwif->extra_base = base + (hwif->channel ? 8 : 16); if (ide_allocate_dma_engine(hwif)) return -1; } return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Bartlomiej Zolnierkiewicz12763.50%969.23%
Jens Axboe5226.00%17.69%
Sergei Shtylyov157.50%17.69%
Andrew Morton42.00%17.69%
Alan Cox21.00%17.69%
Total200100.00%13100.00%

#endif /* CONFIG_BLK_DEV_IDEDMA_PCI */ /** * ide_setup_pci_controller - set up IDE PCI * @dev: PCI device * @bars: PCI BARs mask * @d: IDE port info * @noisy: verbose flag * * Set up the PCI and controller side of the IDE interface. This brings * up the PCI side of the device, checks that the device is enabled * and enables it if need be */
static int ide_setup_pci_controller(struct pci_dev *dev, int bars, const struct ide_port_info *d, int noisy) { int ret; u16 pcicmd; if (noisy) ide_setup_pci_noise(dev, d); ret = ide_pci_enable(dev, bars, d); if (ret < 0) goto out; ret = pci_read_config_word(dev, PCI_COMMAND, &pcicmd); if (ret < 0) { printk(KERN_ERR "%s %s: error accessing PCI regs\n", d->name, pci_name(dev)); goto out_free_bars; } if (!(pcicmd & PCI_COMMAND_IO)) { /* is device disabled? */ ret = ide_pci_configure(dev, d); if (ret < 0) goto out_free_bars; printk(KERN_INFO "%s %s: device enabled (Linux)\n", d->name, pci_name(dev)); } goto out; out_free_bars: pci_release_selected_regions(dev, bars); out: return ret; }

Contributors

PersonTokensPropCommitsCommitProp
Jens Axboe8955.62%114.29%
Bartlomiej Zolnierkiewicz7144.38%685.71%
Total160100.00%7100.00%

/** * ide_pci_setup_ports - configure ports/devices on PCI IDE * @dev: PCI device * @d: IDE port info * @hw: struct ide_hw instances corresponding to this PCI IDE device * @hws: struct ide_hw pointers table to update * * Scan the interfaces attached to this device and do any * necessary per port setup. Attach the devices and ask the * generic DMA layer to do its work for us. * * Normally called automaticall from do_ide_pci_setup_device, * but is also used directly as a helper function by some controllers * where the chipset setup is not the default PCI IDE one. */
void ide_pci_setup_ports(struct pci_dev *dev, const struct ide_port_info *d, struct ide_hw *hw, struct ide_hw **hws) { int channels = (d->host_flags & IDE_HFLAG_SINGLE) ? 1 : 2, port; u8 tmp; /* * Set up the IDE ports */ for (port = 0; port < channels; ++port) { const struct ide_pci_enablebit *e = &d->enablebits[port]; if (e->reg && (pci_read_config_byte(dev, e->reg, &tmp) || (tmp & e->mask) != e->val)) { printk(KERN_INFO "%s %s: IDE port disabled\n", d->name, pci_name(dev)); continue; /* port not enabled */ } if (ide_hw_configure(dev, d, port, hw + port)) continue; *(hws + port) = hw + port; } }

Contributors

PersonTokensPropCommitsCommitProp
Bartlomiej Zolnierkiewicz6743.23%1184.62%
Jens Axboe5736.77%17.69%
Alan Cox3120.00%17.69%
Total155100.00%13100.00%

EXPORT_SYMBOL_GPL(ide_pci_setup_ports); /* * ide_setup_pci_device() looks at the primary/secondary interfaces * on a PCI IDE device and, if they are enabled, prepares the IDE driver * for use with them. This generic code works for most PCI chipsets. * * One thing that is not standardized is the location of the * primary/secondary interface "enable/disable" bits. For chipsets that * we "know" about, this information is in the struct ide_port_info; * for all other chipsets, we just assume both interfaces are enabled. */
static int do_ide_setup_pci_device(struct pci_dev *dev, const struct ide_port_info *d, u8 noisy) { int pciirq, ret; /* * Can we trust the reported IRQ? */ pciirq = dev->irq; /* * This allows offboard ide-pci cards the enable a BIOS, * verify interrupt settings of split-mirror pci-config * space, place chipset into init-mode, and/or preserve * an interrupt if the card is not native ide support. */ ret = d->init_chipset ? d->init_chipset(dev) : 0; if (ret < 0) goto out; if (ide_pci_is_in_compatibility_mode(dev)) { if (noisy) printk(KERN_INFO "%s %s: not 100%% native mode: will " "probe irqs later\n", d->name, pci_name(dev)); pciirq = 0; } else if (!pciirq && noisy) { printk(KERN_WARNING "%s %s: bad irq (%d): will probe later\n", d->name, pci_name(dev), pciirq); } else if (noisy) { printk(KERN_INFO "%s %s: 100%% native mode on irq %d\n", d->name, pci_name(dev), pciirq); } ret = pciirq; out: return ret; }

Contributors

PersonTokensPropCommitsCommitProp
Alan Cox7650.67%18.33%
Bartlomiej Zolnierkiewicz7046.67%975.00%
Jens Axboe32.00%18.33%
Linus Torvalds10.67%18.33%
Total150100.00%12100.00%


int ide_pci_init_two(struct pci_dev *dev1, struct pci_dev *dev2, const struct ide_port_info *d, void *priv) { struct pci_dev *pdev[] = { dev1, dev2 }; struct ide_host *host; int ret, i, n_ports = dev2 ? 4 : 2, bars; struct ide_hw hw[4], *hws[] = { NULL, NULL, NULL, NULL }; if (d->host_flags & IDE_HFLAG_SINGLE) bars = (1 << 2) - 1; else bars = (1 << 4) - 1; if ((d->host_flags & IDE_HFLAG_NO_DMA) == 0) { if (d->host_flags & IDE_HFLAG_CS5520) bars |= (1 << 2); else bars |= (1 << 4); } for (i = 0; i < n_ports / 2; i++) { ret = ide_setup_pci_controller(pdev[i], bars, d, !i); if (ret < 0) { if (i == 1) pci_release_selected_regions(pdev[0], bars); goto out; } ide_pci_setup_ports(pdev[i], d, &hw[i*2], &hws[i*2]); } host = ide_host_alloc(d, hws, n_ports); if (host == NULL) { ret = -ENOMEM; goto out_free_bars; } host->dev[0] = &dev1->dev; if (dev2) host->dev[1] = &dev2->dev; host->host_priv = priv; host->irq_flags = IRQF_SHARED; pci_set_drvdata(pdev[0], host); if (dev2) pci_set_drvdata(pdev[1], host); for (i = 0; i < n_ports / 2; i++) { ret = do_ide_setup_pci_device(pdev[i], d, !i); /* * FIXME: Mom, mom, they stole me the helper function to undo * do_ide_setup_pci_device() on the first device! */ if (ret < 0) goto out_free_bars; /* fixup IRQ */ if (ide_pci_is_in_compatibility_mode(pdev[i])) { hw[i*2].irq = pci_get_legacy_ide_irq(pdev[i], 0); hw[i*2 + 1].irq = pci_get_legacy_ide_irq(pdev[i], 1); } else hw[i*2 + 1].irq = hw[i*2].irq = ret; } ret = ide_host_register(host, d, hws); if (ret) ide_host_free(host); else goto out; out_free_bars: i = n_ports / 2; while (i--) pci_release_selected_regions(pdev[i], bars); out: return ret; }

Contributors

PersonTokensPropCommitsCommitProp
Bartlomiej Zolnierkiewicz46894.74%1995.00%
Jens Axboe265.26%15.00%
Total494100.00%20100.00%

EXPORT_SYMBOL_GPL(ide_pci_init_two);
int ide_pci_init_one(struct pci_dev *dev, const struct ide_port_info *d, void *priv) { return ide_pci_init_two(dev, NULL, d, priv); }

Contributors

PersonTokensPropCommitsCommitProp
Bartlomiej Zolnierkiewicz32100.00%1100.00%
Total32100.00%1100.00%

EXPORT_SYMBOL_GPL(ide_pci_init_one);
void ide_pci_remove(struct pci_dev *dev) { struct ide_host *host = pci_get_drvdata(dev); struct pci_dev *dev2 = host->dev[1] ? to_pci_dev(host->dev[1]) : NULL; int bars; if (host->host_flags & IDE_HFLAG_SINGLE) bars = (1 << 2) - 1; else bars = (1 << 4) - 1; if ((host->host_flags & IDE_HFLAG_NO_DMA) == 0) { if (host->host_flags & IDE_HFLAG_CS5520) bars |= (1 << 2); else bars |= (1 << 4); } ide_host_remove(host); if (dev2) pci_release_selected_regions(dev2, bars); pci_release_selected_regions(dev, bars); if (dev2) pci_disable_device(dev2); pci_disable_device(dev); }

Contributors

PersonTokensPropCommitsCommitProp
Bartlomiej Zolnierkiewicz152100.00%1100.00%
Total152100.00%1100.00%

EXPORT_SYMBOL_GPL(ide_pci_remove); #ifdef CONFIG_PM
int ide_pci_suspend(struct pci_dev *dev, pm_message_t state) { pci_save_state(dev); pci_disable_device(dev); pci_set_power_state(dev, pci_choose_state(dev, state)); return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Bartlomiej Zolnierkiewicz38100.00%1100.00%
Total38100.00%1100.00%

EXPORT_SYMBOL_GPL(ide_pci_suspend);
int ide_pci_resume(struct pci_dev *dev) { struct ide_host *host = pci_get_drvdata(dev); int rc; pci_set_power_state(dev, PCI_D0); rc = pci_enable_device(dev); if (rc) return rc; pci_restore_state(dev); pci_set_master(dev); if (host->init_chipset) host->init_chipset(dev); return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Bartlomiej Zolnierkiewicz70100.00%1100.00%
Total70100.00%1100.00%

EXPORT_SYMBOL_GPL(ide_pci_resume); #endif

Overall Contributors

PersonTokensPropCommitsCommitProp
Bartlomiej Zolnierkiewicz167961.10%5275.36%
Jens Axboe87531.84%45.80%
Alan Cox1254.55%22.90%
Sergei Shtylyov371.35%22.90%
David Howells110.40%11.45%
Andrew Morton70.25%22.90%
Quentin Lambert40.15%11.45%
Yang Hongyang40.15%11.45%
Paul Gortmaker30.11%11.45%
Linus Torvalds10.04%11.45%
Paolo Ciarrocchi10.04%11.45%
Benjamin Herrenschmidt10.04%11.45%
Total2748100.00%69100.00%
Directory: drivers/ide
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with cregit.