cregit-Linux how code gets into the kernel

Release 4.14 drivers/irqchip/irq-gic-realview.c

Directory: drivers/irqchip
// SPDX-License-Identifier: GPL-2.0
/*
 * Special GIC quirks for the ARM RealView
 * Copyright (C) 2015 Linus Walleij
 */
#include <linux/of.h>
#include <linux/regmap.h>
#include <linux/mfd/syscon.h>
#include <linux/bitops.h>
#include <linux/irqchip.h>
#include <linux/irqchip/arm-gic.h>


#define REALVIEW_SYS_LOCK_OFFSET	0x20

#define REALVIEW_SYS_PLD_CTRL1		0x74

#define REALVIEW_EB_REVB_SYS_PLD_CTRL1	0xD8

#define VERSATILE_LOCK_VAL		0xA05F

#define PLD_INTMODE_MASK		BIT(22)|BIT(23)|BIT(24)

#define PLD_INTMODE_LEGACY		0x0

#define PLD_INTMODE_NEW_DCC		BIT(22)

#define PLD_INTMODE_NEW_NO_DCC		BIT(23)

#define PLD_INTMODE_FIQ_ENABLE		BIT(24)

/* For some reason RealView EB Rev B moved this register */

static const struct of_device_id syscon_pldset_of_match[] = {
	{
		.compatible = "arm,realview-eb11mp-revb-syscon",
		.data = (void *)REALVIEW_EB_REVB_SYS_PLD_CTRL1,
        },
	{
		.compatible = "arm,realview-eb11mp-revc-syscon",
		.data = (void *)REALVIEW_SYS_PLD_CTRL1,
        },
	{
		.compatible = "arm,realview-eb-syscon",
		.data = (void *)REALVIEW_SYS_PLD_CTRL1,
        },
	{
		.compatible = "arm,realview-pb11mp-syscon",
		.data = (void *)REALVIEW_SYS_PLD_CTRL1,
        },
	{},
};


static int __init realview_gic_of_init(struct device_node *node, struct device_node *parent) { struct regmap *map; struct device_node *np; const struct of_device_id *gic_id; u32 pld1_ctrl; np = of_find_matching_node_and_match(NULL, syscon_pldset_of_match, &gic_id); if (!np) return -ENODEV; pld1_ctrl = (u32)gic_id->data; /* The PB11MPCore GIC needs to be configured in the syscon */ map = syscon_node_to_regmap(np); if (!IS_ERR(map)) { /* new irq mode with no DCC */ regmap_write(map, REALVIEW_SYS_LOCK_OFFSET, VERSATILE_LOCK_VAL); regmap_update_bits(map, pld1_ctrl, PLD_INTMODE_NEW_NO_DCC, PLD_INTMODE_MASK); regmap_write(map, REALVIEW_SYS_LOCK_OFFSET, 0x0000); pr_info("RealView GIC: set up interrupt controller to NEW mode, no DCC\n"); } else { pr_err("RealView GIC setup: could not find syscon\n"); return -ENODEV; } return gic_of_init(node, parent); }

Contributors

PersonTokensPropCommitsCommitProp
Linus Walleij139100.00%2100.00%
Total139100.00%2100.00%

IRQCHIP_DECLARE(armtc11mp_gic, "arm,tc11mp-gic", realview_gic_of_init); IRQCHIP_DECLARE(armeb11mp_gic, "arm,eb11mp-gic", realview_gic_of_init);

Overall Contributors

PersonTokensPropCommitsCommitProp
Linus Walleij28899.65%266.67%
Greg Kroah-Hartman10.35%133.33%
Total289100.00%3100.00%
Directory: drivers/irqchip
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with cregit.