/* * Copyright (C) 2016 Marvell, All Rights Reserved. * * Author: Hu Ziji <huziji@marvell.com> * Date: 2016-8-24 * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation version 2. */ #ifndef SDHCI_XENON_H_ #define SDHCI_XENON_H_ /* Register Offset of Xenon SDHC self-defined register */ #define XENON_SYS_CFG_INFO 0x0104 #define XENON_SLOT_TYPE_SDIO_SHIFT 24 #define XENON_NR_SUPPORTED_SLOT_MASK 0x7 #define XENON_SYS_OP_CTRL 0x0108 #define XENON_AUTO_CLKGATE_DISABLE_MASK BIT(20) #define XENON_SDCLK_IDLEOFF_ENABLE_SHIFT 8 #define XENON_SLOT_ENABLE_SHIFT 0 #define XENON_SYS_EXT_OP_CTRL 0x010C #define XENON_MASK_CMD_CONFLICT_ERR BIT(8) #define XENON_SLOT_OP_STATUS_CTRL 0x0128 #define XENON_TUN_CONSECUTIVE_TIMES_SHIFT 16 #define XENON_TUN_CONSECUTIVE_TIMES_MASK 0x7 #define XENON_TUN_CONSECUTIVE_TIMES 0x4 #define XENON_TUNING_STEP_SHIFT 12 #define XENON_TUNING_STEP_MASK 0xF #define XENON_TUNING_STEP_DIVIDER BIT(6) #define XENON_SLOT_EMMC_CTRL 0x0130 #define XENON_ENABLE_RESP_STROBE BIT(25) #define XENON_ENABLE_DATA_STROBE BIT(24) #define XENON_SLOT_RETUNING_REQ_CTRL 0x0144 /* retuning compatible */ #define XENON_RETUNING_COMPATIBLE 0x1 #define XENON_SLOT_EXT_PRESENT_STATE 0x014C #define XENON_DLL_LOCK_STATE 0x1 #define XENON_SLOT_DLL_CUR_DLY_VAL 0x0150 /* Tuning Parameter */ #define XENON_TMR_RETUN_NO_PRESENT 0xF #define XENON_DEF_TUNING_COUNT 0x9 #define XENON_DEFAULT_SDCLK_FREQ 400000 #define XENON_LOWEST_SDCLK_FREQ 100000 /* Xenon specific Mode Select value */ #define XENON_CTRL_HS200 0x5 #define XENON_CTRL_HS400 0x6 struct xenon_priv { unsigned char tuning_count; /* idx of SDHC */ u8 sdhc_id; /* * eMMC/SD/SDIO require different register settings. * Xenon driver has to recognize card type * before mmc_host->card is not available. * This field records the card type during init. * It is updated in xenon_init_card(). * * It is only valid during initialization after it is updated. * Do not access this variable in normal transfers after * initialization completes. */ unsigned int init_card_type; /* * The bus_width, timing, and clock fields in below * record the current ios setting of Xenon SDHC. * Driver will adjust PHY setting if any change to * ios affects PHY timing. */ unsigned char bus_width; unsigned char timing; unsigned int clock; struct clk *axi_clk; int phy_type; /* * Contains board-specific PHY parameters * passed from device tree. */ void *phy_params; struct xenon_emmc_phy_regs *emmc_phy_regs; bool restore_needed; }; int xenon_phy_adj(struct sdhci_host *host, struct mmc_ios *ios); int xenon_phy_parse_dt(struct device_node *np, struct sdhci_host *host); void xenon_soc_pad_ctrl(struct sdhci_host *host, unsigned char signal_voltage); #endifOverall Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Hu Ziji | 218 | 96.46% | 4 | 66.67% |
| Gregory CLEMENT | 5 | 2.21% | 1 | 16.67% |
| Zhoujie Wu | 3 | 1.33% | 1 | 16.67% |
| Total | 226 | 100.00% | 6 | 100.00% |