cregit-Linux how code gets into the kernel

Release 4.14 drivers/regulator/max1586.c

/*
 * max1586.c  --  Voltage and current regulation for the Maxim 1586
 *
 * Copyright (C) 2008 Robert Jarzmik
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 */
#include <linux/module.h>
#include <linux/err.h>
#include <linux/i2c.h>
#include <linux/platform_device.h>
#include <linux/regulator/driver.h>
#include <linux/slab.h>
#include <linux/regulator/max1586.h>
#include <linux/of_device.h>
#include <linux/regulator/of_regulator.h>


#define MAX1586_V3_MAX_VSEL 31

#define MAX1586_V6_MAX_VSEL 3


#define MAX1586_V3_MIN_UV   700000

#define MAX1586_V3_MAX_UV  1475000


#define MAX1586_V6_MIN_UV        0

#define MAX1586_V6_MAX_UV  3000000


#define I2C_V3_SELECT (0 << 5)

#define I2C_V6_SELECT (1 << 5)


struct max1586_data {
	
struct i2c_client *client;

	/* min/max V3 voltage */
	
unsigned int min_uV;
	
unsigned int max_uV;

	
unsigned int v3_curr_sel;
	
unsigned int v6_curr_sel;
};

/*
 * V6 voltage
 * On I2C bus, sending a "x" byte to the max1586 means :
 *   set V6 to either 0V, 1.8V, 2.5V, 3V depending on (x & 0x3)
 * As regulator framework doesn't accept voltages to be 0V, we use 1uV.
 */

static const unsigned int v6_voltages_uv[] = { 1, 1800000, 2500000, 3000000 };

/*
 * V3 voltage
 * On I2C bus, sending a "x" byte to the max1586 means :
 *   set V3 to 0.700V + (x & 0x1f) * 0.025V
 * This voltage can be increased by external resistors
 * R24 and R25=100kOhm as described in the data sheet.
 * The gain is approximately: 1 + R24/R25 + R24/185.5kOhm
 */

static int max1586_v3_get_voltage_sel(struct regulator_dev *rdev) { struct max1586_data *max1586 = rdev_get_drvdata(rdev); return max1586->v3_curr_sel; }

Contributors

PersonTokensPropCommitsCommitProp
Axel Lin26100.00%1100.00%
Total26100.00%1100.00%


static int max1586_v3_set_voltage_sel(struct regulator_dev *rdev, unsigned selector) { struct max1586_data *max1586 = rdev_get_drvdata(rdev); struct i2c_client *client = max1586->client; int ret; u8 v3_prog; dev_dbg(&client->dev, "changing voltage v3 to %dmv\n", regulator_list_voltage_linear(rdev, selector) / 1000); v3_prog = I2C_V3_SELECT | (u8) selector; ret = i2c_smbus_write_byte(client, v3_prog); if (ret) return ret; max1586->v3_curr_sel = selector; return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Robert Jarzmik5256.52%116.67%
Axel Lin2628.26%350.00%
Philipp Zabel1213.04%116.67%
Mark Brown22.17%116.67%
Total92100.00%6100.00%


static int max1586_v6_get_voltage_sel(struct regulator_dev *rdev) { struct max1586_data *max1586 = rdev_get_drvdata(rdev); return max1586->v6_curr_sel; }

Contributors

PersonTokensPropCommitsCommitProp
Axel Lin2492.31%150.00%
Robert Jarzmik27.69%150.00%
Total26100.00%2100.00%


static int max1586_v6_set_voltage_sel(struct regulator_dev *rdev, unsigned int selector) { struct max1586_data *max1586 = rdev_get_drvdata(rdev); struct i2c_client *client = max1586->client; u8 v6_prog; int ret; dev_dbg(&client->dev, "changing voltage v6 to %dmv\n", rdev->desc->volt_table[selector] / 1000); v6_prog = I2C_V6_SELECT | (u8) selector; ret = i2c_smbus_write_byte(client, v6_prog); if (ret) return ret; max1586->v6_curr_sel = selector; return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Robert Jarzmik5254.74%120.00%
Axel Lin4042.11%360.00%
Mark Brown33.16%120.00%
Total95100.00%5100.00%

/* * The Maxim 1586 controls V3 and V6 voltages, but offers no way of reading back * the set up value. */ static const struct regulator_ops max1586_v3_ops = { .get_voltage_sel = max1586_v3_get_voltage_sel, .set_voltage_sel = max1586_v3_set_voltage_sel, .list_voltage = regulator_list_voltage_linear, .map_voltage = regulator_map_voltage_linear, }; static const struct regulator_ops max1586_v6_ops = { .get_voltage_sel = max1586_v6_get_voltage_sel, .set_voltage_sel = max1586_v6_set_voltage_sel, .list_voltage = regulator_list_voltage_table, }; static struct regulator_desc max1586_reg[] = { { .name = "Output_V3", .id = MAX1586_V3, .ops = &max1586_v3_ops, .type = REGULATOR_VOLTAGE, .n_voltages = MAX1586_V3_MAX_VSEL + 1, .owner = THIS_MODULE, }, { .name = "Output_V6", .id = MAX1586_V6, .ops = &max1586_v6_ops, .type = REGULATOR_VOLTAGE, .n_voltages = MAX1586_V6_MAX_VSEL + 1, .volt_table = v6_voltages_uv, .owner = THIS_MODULE, }, };
static int of_get_max1586_platform_data(struct device *dev, struct max1586_platform_data *pdata) { struct max1586_subdev_data *sub; struct of_regulator_match rmatch[ARRAY_SIZE(max1586_reg)] = { }; struct device_node *np = dev->of_node; int i, matched; if (of_property_read_u32(np, "v3-gain", &pdata->v3_gain) < 0) { dev_err(dev, "%pOF has no 'v3-gain' property\n", np); return -EINVAL; } np = of_get_child_by_name(np, "regulators"); if (!np) { dev_err(dev, "missing 'regulators' subnode in DT\n"); return -EINVAL; } for (i = 0; i < ARRAY_SIZE(rmatch); i++) rmatch[i].name = max1586_reg[i].name; matched = of_regulator_match(dev, np, rmatch, ARRAY_SIZE(rmatch)); of_node_put(np); /* * If matched is 0, ie. neither Output_V3 nor Output_V6 have been found, * return 0, which signals the normal situation where no subregulator is * available. This is normal because the max1586 doesn't provide any * readback support, so the subregulators can't report any status * anyway. If matched < 0, return the error. */ if (matched <= 0) return matched; pdata->subdevs = devm_kzalloc(dev, sizeof(struct max1586_subdev_data) * matched, GFP_KERNEL); if (!pdata->subdevs) return -ENOMEM; pdata->num_subdevs = matched; sub = pdata->subdevs; for (i = 0; i < matched; i++) { sub->id = i; sub->name = rmatch[i].of_node->name; sub->platform_data = rmatch[i].init_data; sub++; } return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Robert Jarzmik25598.46%125.00%
Javier Martinez Canillas20.77%125.00%
Rob Herring10.39%125.00%
Fengguang Wu10.39%125.00%
Total259100.00%4100.00%

static const struct of_device_id max1586_of_match[] = { { .compatible = "maxim,max1586", }, {}, }; MODULE_DEVICE_TABLE(of, max1586_of_match);
static int max1586_pmic_probe(struct i2c_client *client, const struct i2c_device_id *i2c_id) { struct max1586_platform_data *pdata, pdata_of; struct regulator_config config = { }; struct max1586_data *max1586; int i, id, ret; const struct of_device_id *match; pdata = dev_get_platdata(&client->dev); if (client->dev.of_node && !pdata) { match = of_match_device(of_match_ptr(max1586_of_match), &client->dev); if (!match) { dev_err(&client->dev, "Error: No device match found\n"); return -ENODEV; } ret = of_get_max1586_platform_data(&client->dev, &pdata_of); if (ret < 0) return ret; pdata = &pdata_of; } max1586 = devm_kzalloc(&client->dev, sizeof(struct max1586_data), GFP_KERNEL); if (!max1586) return -ENOMEM; max1586->client = client; if (!pdata->v3_gain) return -EINVAL; max1586->min_uV = MAX1586_V3_MIN_UV / 1000 * pdata->v3_gain / 1000; max1586->max_uV = MAX1586_V3_MAX_UV / 1000 * pdata->v3_gain / 1000; /* Set curr_sel to default voltage on power-up */ max1586->v3_curr_sel = 24; /* 1.3V */ max1586->v6_curr_sel = 0; for (i = 0; i < pdata->num_subdevs && i <= MAX1586_V6; i++) { struct regulator_dev *rdev; id = pdata->subdevs[i].id; if (!pdata->subdevs[i].platform_data) continue; if (id < MAX1586_V3 || id > MAX1586_V6) { dev_err(&client->dev, "invalid regulator id %d\n", id); return -EINVAL; } if (id == MAX1586_V3) { max1586_reg[id].min_uV = max1586->min_uV; max1586_reg[id].uV_step = (max1586->max_uV - max1586->min_uV) / MAX1586_V3_MAX_VSEL; } config.dev = &client->dev; config.init_data = pdata->subdevs[i].platform_data; config.driver_data = max1586; rdev = devm_regulator_register(&client->dev, &max1586_reg[id], &config); if (IS_ERR(rdev)) { dev_err(&client->dev, "failed to register %s\n", max1586_reg[id].name); return PTR_ERR(rdev); } } i2c_set_clientdata(client, max1586); dev_info(&client->dev, "Maxim 1586 regulator driver loaded\n"); return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Robert Jarzmik26761.38%216.67%
Axel Lin6514.94%433.33%
Philipp Zabel5111.72%216.67%
Mark Brown306.90%18.33%
Sachin Kamat163.68%18.33%
Krzysztof Kozlowski51.15%18.33%
Rajendra Nayak10.23%18.33%
Total435100.00%12100.00%

static const struct i2c_device_id max1586_id[] = { { "max1586", 0 }, { } }; MODULE_DEVICE_TABLE(i2c, max1586_id); static struct i2c_driver max1586_pmic_driver = { .probe = max1586_pmic_probe, .driver = { .name = "max1586", .of_match_table = of_match_ptr(max1586_of_match), }, .id_table = max1586_id, };
static int __init max1586_pmic_init(void) { return i2c_add_driver(&max1586_pmic_driver); }

Contributors

PersonTokensPropCommitsCommitProp
Robert Jarzmik16100.00%1100.00%
Total16100.00%1100.00%

subsys_initcall(max1586_pmic_init);
static void __exit max1586_pmic_exit(void) { i2c_del_driver(&max1586_pmic_driver); }

Contributors

PersonTokensPropCommitsCommitProp
Robert Jarzmik15100.00%1100.00%
Total15100.00%1100.00%

module_exit(max1586_pmic_exit); /* Module information */ MODULE_DESCRIPTION("MAXIM 1586 voltage regulator driver"); MODULE_AUTHOR("Robert Jarzmik"); MODULE_LICENSE("GPL");

Overall Contributors

PersonTokensPropCommitsCommitProp
Robert Jarzmik93170.80%28.70%
Axel Lin23317.72%834.78%
Philipp Zabel836.31%28.70%
Mark Brown352.66%28.70%
Sachin Kamat161.22%14.35%
Krzysztof Kozlowski70.53%28.70%
Tejun Heo30.23%14.35%
Javier Martinez Canillas20.15%14.35%
Dmitry Torokhov20.15%14.35%
Rajendra Nayak10.08%14.35%
Fengguang Wu10.08%14.35%
Rob Herring10.08%14.35%
Total1315100.00%23100.00%
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with cregit.