cregit-Linux how code gets into the kernel

Release 4.14 drivers/thermal/imx_thermal.c

Directory: drivers/thermal
/*
 * Copyright 2013 Freescale Semiconductor, Inc.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 *
 */

#include <linux/clk.h>
#include <linux/cpufreq.h>
#include <linux/cpu_cooling.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/slab.h>
#include <linux/thermal.h>
#include <linux/types.h>


#define REG_SET		0x4

#define REG_CLR		0x8

#define REG_TOG		0xc


#define MISC0				0x0150

#define MISC0_REFTOP_SELBIASOFF		(1 << 3)

#define MISC1				0x0160

#define MISC1_IRQ_TEMPHIGH		(1 << 29)
/* Below LOW and PANIC bits are only for TEMPMON_IMX6SX */

#define MISC1_IRQ_TEMPLOW		(1 << 28)

#define MISC1_IRQ_TEMPPANIC		(1 << 27)


#define TEMPSENSE0			0x0180

#define TEMPSENSE0_ALARM_VALUE_SHIFT	20

#define TEMPSENSE0_ALARM_VALUE_MASK	(0xfff << TEMPSENSE0_ALARM_VALUE_SHIFT)

#define TEMPSENSE0_TEMP_CNT_SHIFT	8

#define TEMPSENSE0_TEMP_CNT_MASK	(0xfff << TEMPSENSE0_TEMP_CNT_SHIFT)

#define TEMPSENSE0_FINISHED		(1 << 2)

#define TEMPSENSE0_MEASURE_TEMP		(1 << 1)

#define TEMPSENSE0_POWER_DOWN		(1 << 0)


#define TEMPSENSE1			0x0190

#define TEMPSENSE1_MEASURE_FREQ		0xffff
/* Below TEMPSENSE2 is only for TEMPMON_IMX6SX */

#define TEMPSENSE2			0x0290

#define TEMPSENSE2_LOW_VALUE_SHIFT	0

#define TEMPSENSE2_LOW_VALUE_MASK	0xfff

#define TEMPSENSE2_PANIC_VALUE_SHIFT	16

#define TEMPSENSE2_PANIC_VALUE_MASK	0xfff0000


#define OCOTP_MEM0			0x0480

#define OCOTP_ANA1			0x04e0

/* The driver supports 1 passive trip point and 1 critical trip point */

enum imx_thermal_trip {
	
IMX_TRIP_PASSIVE,
	
IMX_TRIP_CRITICAL,
	
IMX_TRIP_NUM,
};


#define IMX_POLLING_DELAY		2000 
/* millisecond */

#define IMX_PASSIVE_DELAY		1000


#define FACTOR0				10000000

#define FACTOR1				15976

#define FACTOR2				4297157


#define TEMPMON_IMX6Q			1

#define TEMPMON_IMX6SX			2


struct thermal_soc_data {
	
u32 version;
};


static struct thermal_soc_data thermal_imx6q_data = {
	.version = TEMPMON_IMX6Q,
};


static struct thermal_soc_data thermal_imx6sx_data = {
	.version = TEMPMON_IMX6SX,
};


struct imx_thermal_data {
	
struct cpufreq_policy *policy;
	
struct thermal_zone_device *tz;
	
struct thermal_cooling_device *cdev;
	
enum thermal_device_mode mode;
	
struct regmap *tempmon;
	

u32 c1, c2; /* See formula in imx_get_sensor_data() */
	
int temp_passive;
	
int temp_critical;
	
int temp_max;
	
int alarm_temp;
	
int last_temp;
	
bool irq_enabled;
	
int irq;
	
struct clk *thermal_clk;
	
const struct thermal_soc_data *socdata;
	
const char *temp_grade;
};


static void imx_set_panic_temp(struct imx_thermal_data *data, int panic_temp) { struct regmap *map = data->tempmon; int critical_value; critical_value = (data->c2 - panic_temp) / data->c1; regmap_write(map, TEMPSENSE2 + REG_CLR, TEMPSENSE2_PANIC_VALUE_MASK); regmap_write(map, TEMPSENSE2 + REG_SET, critical_value << TEMPSENSE2_PANIC_VALUE_SHIFT); }

Contributors

PersonTokensPropCommitsCommitProp
Anson Huang6398.44%150.00%
Sascha Hauer11.56%150.00%
Total64100.00%2100.00%


static void imx_set_alarm_temp(struct imx_thermal_data *data, int alarm_temp) { struct regmap *map = data->tempmon; int alarm_value; data->alarm_temp = alarm_temp; alarm_value = (data->c2 - alarm_temp) / data->c1; regmap_write(map, TEMPSENSE0 + REG_CLR, TEMPSENSE0_ALARM_VALUE_MASK); regmap_write(map, TEMPSENSE0 + REG_SET, alarm_value << TEMPSENSE0_ALARM_VALUE_SHIFT); }

Contributors

PersonTokensPropCommitsCommitProp
Philipp Zabel6795.71%133.33%
Anson Huang22.86%133.33%
Sascha Hauer11.43%133.33%
Total70100.00%3100.00%


static int imx_get_temp(struct thermal_zone_device *tz, int *temp) { struct imx_thermal_data *data = tz->devdata; struct regmap *map = data->tempmon; unsigned int n_meas; bool wait; u32 val; if (data->mode == THERMAL_DEVICE_ENABLED) { /* Check if a measurement is currently in progress */ regmap_read(map, TEMPSENSE0, &val); wait = !(val & TEMPSENSE0_FINISHED); } else { /* * Every time we measure the temperature, we will power on the * temperature sensor, enable measurements, take a reading, * disable measurements, power off the temperature sensor. */ regmap_write(map, TEMPSENSE0 + REG_CLR, TEMPSENSE0_POWER_DOWN); regmap_write(map, TEMPSENSE0 + REG_SET, TEMPSENSE0_MEASURE_TEMP); wait = true; } /* * According to the temp sensor designers, it may require up to ~17us * to complete a measurement. */ if (wait) usleep_range(20, 50); regmap_read(map, TEMPSENSE0, &val); if (data->mode != THERMAL_DEVICE_ENABLED) { regmap_write(map, TEMPSENSE0 + REG_CLR, TEMPSENSE0_MEASURE_TEMP); regmap_write(map, TEMPSENSE0 + REG_SET, TEMPSENSE0_POWER_DOWN); } if ((val & TEMPSENSE0_FINISHED) == 0) { dev_dbg(&tz->device, "temp measurement never finished\n"); return -EAGAIN; } n_meas = (val & TEMPSENSE0_TEMP_CNT_MASK) >> TEMPSENSE0_TEMP_CNT_SHIFT; /* See imx_get_sensor_data() for formula derivation */ *temp = data->c2 - n_meas * data->c1; /* Update alarm value to next higher trip point for TEMPMON_IMX6Q */ if (data->socdata->version == TEMPMON_IMX6Q) { if (data->alarm_temp == data->temp_passive && *temp >= data->temp_passive) imx_set_alarm_temp(data, data->temp_critical); if (data->alarm_temp == data->temp_critical && *temp < data->temp_passive) { imx_set_alarm_temp(data, data->temp_passive); dev_dbg(&tz->device, "thermal alarm off: T < %d\n", data->alarm_temp / 1000); } } if (*temp != data->last_temp) { dev_dbg(&tz->device, "millicelsius: %d\n", *temp); data->last_temp = *temp; } /* Reenable alarm IRQ if temperature below alarm temperature */ if (!data->irq_enabled && *temp < data->alarm_temp) { data->irq_enabled = true; enable_irq(data->irq); } return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Shawn Guo17750.00%120.00%
Philipp Zabel15844.63%120.00%
Anson Huang164.52%240.00%
Sascha Hauer30.85%120.00%
Total354100.00%5100.00%


static int imx_get_mode(struct thermal_zone_device *tz, enum thermal_device_mode *mode) { struct imx_thermal_data *data = tz->devdata; *mode = data->mode; return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Shawn Guo35100.00%1100.00%
Total35100.00%1100.00%


static int imx_set_mode(struct thermal_zone_device *tz, enum thermal_device_mode mode) { struct imx_thermal_data *data = tz->devdata; struct regmap *map = data->tempmon; if (mode == THERMAL_DEVICE_ENABLED) { tz->polling_delay = IMX_POLLING_DELAY; tz->passive_delay = IMX_PASSIVE_DELAY; regmap_write(map, TEMPSENSE0 + REG_CLR, TEMPSENSE0_POWER_DOWN); regmap_write(map, TEMPSENSE0 + REG_SET, TEMPSENSE0_MEASURE_TEMP); if (!data->irq_enabled) { data->irq_enabled = true; enable_irq(data->irq); } } else { regmap_write(map, TEMPSENSE0 + REG_CLR, TEMPSENSE0_MEASURE_TEMP); regmap_write(map, TEMPSENSE0 + REG_SET, TEMPSENSE0_POWER_DOWN); tz->polling_delay = 0; tz->passive_delay = 0; if (data->irq_enabled) { disable_irq(data->irq); data->irq_enabled = false; } } data->mode = mode; thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED); return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Philipp Zabel10762.57%133.33%
Shawn Guo6236.26%133.33%
Srinivas Pandruvada21.17%133.33%
Total171100.00%3100.00%


static int imx_get_trip_type(struct thermal_zone_device *tz, int trip, enum thermal_trip_type *type) { *type = (trip == IMX_TRIP_PASSIVE) ? THERMAL_TRIP_PASSIVE : THERMAL_TRIP_CRITICAL; return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Shawn Guo35100.00%1100.00%
Total35100.00%1100.00%


static int imx_get_crit_temp(struct thermal_zone_device *tz, int *temp) { struct imx_thermal_data *data = tz->devdata; *temp = data->temp_critical; return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Shawn Guo2161.76%133.33%
Philipp Zabel1235.29%133.33%
Sascha Hauer12.94%133.33%
Total34100.00%3100.00%


static int imx_get_trip_temp(struct thermal_zone_device *tz, int trip, int *temp) { struct imx_thermal_data *data = tz->devdata; *temp = (trip == IMX_TRIP_PASSIVE) ? data->temp_passive : data->temp_critical; return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Shawn Guo2655.32%133.33%
Philipp Zabel2042.55%133.33%
Sascha Hauer12.13%133.33%
Total47100.00%3100.00%


static int imx_set_trip_temp(struct thermal_zone_device *tz, int trip, int temp) { struct imx_thermal_data *data = tz->devdata; /* do not allow changing critical threshold */ if (trip == IMX_TRIP_CRITICAL) return -EPERM; /* do not allow passive to be set higher than critical */ if (temp < 0 || temp > data->temp_critical) return -EINVAL; data->temp_passive = temp; imx_set_alarm_temp(data, temp); return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Philipp Zabel5578.57%233.33%
Tim Harvey57.14%116.67%
Shawn Guo57.14%116.67%
Dan Carpenter45.71%116.67%
Sascha Hauer11.43%116.67%
Total70100.00%6100.00%


static int imx_bind(struct thermal_zone_device *tz, struct thermal_cooling_device *cdev) { int ret; ret = thermal_zone_bind_cooling_device(tz, IMX_TRIP_PASSIVE, cdev, THERMAL_NO_LIMIT, THERMAL_NO_LIMIT, THERMAL_WEIGHT_DEFAULT); if (ret) { dev_err(&tz->device, "binding zone %s with cdev %s failed:%d\n", tz->type, cdev->type, ret); return ret; } return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Shawn Guo6697.06%150.00%
Kapileshwar Singh22.94%150.00%
Total68100.00%2100.00%


static int imx_unbind(struct thermal_zone_device *tz, struct thermal_cooling_device *cdev) { int ret; ret = thermal_zone_unbind_cooling_device(tz, IMX_TRIP_PASSIVE, cdev); if (ret) { dev_err(&tz->device, "unbinding zone %s with cdev %s failed:%d\n", tz->type, cdev->type, ret); return ret; } return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Shawn Guo62100.00%1100.00%
Total62100.00%1100.00%

static struct thermal_zone_device_ops imx_tz_ops = { .bind = imx_bind, .unbind = imx_unbind, .get_temp = imx_get_temp, .get_mode = imx_get_mode, .set_mode = imx_set_mode, .get_trip_type = imx_get_trip_type, .get_trip_temp = imx_get_trip_temp, .get_crit_temp = imx_get_crit_temp, .set_trip_temp = imx_set_trip_temp, };
static int imx_get_sensor_data(struct platform_device *pdev) { struct imx_thermal_data *data = platform_get_drvdata(pdev); struct regmap *map; int t1, n1; int ret; u32 val; u64 temp64; map = syscon_regmap_lookup_by_phandle(pdev->dev.of_node, "fsl,tempmon-data"); if (IS_ERR(map)) { ret = PTR_ERR(map); dev_err(&pdev->dev, "failed to get sensor regmap: %d\n", ret); return ret; } ret = regmap_read(map, OCOTP_ANA1, &val); if (ret) { dev_err(&pdev->dev, "failed to read sensor data: %d\n", ret); return ret; } if (val == 0 || val == ~0) { dev_err(&pdev->dev, "invalid sensor calibration data\n"); return -EINVAL; } /* * Sensor data layout: * [31:20] - sensor value @ 25C * Use universal formula now and only need sensor value @ 25C * slope = 0.4297157 - (0.0015976 * 25C fuse) */ n1 = val >> 20; t1 = 25; /* t1 always 25C */ /* * Derived from linear interpolation: * slope = 0.4297157 - (0.0015976 * 25C fuse) * slope = (FACTOR2 - FACTOR1 * n1) / FACTOR0 * (Nmeas - n1) / (Tmeas - t1) = slope * We want to reduce this down to the minimum computation necessary * for each temperature read. Also, we want Tmeas in millicelsius * and we don't want to lose precision from integer division. So... * Tmeas = (Nmeas - n1) / slope + t1 * milli_Tmeas = 1000 * (Nmeas - n1) / slope + 1000 * t1 * milli_Tmeas = -1000 * (n1 - Nmeas) / slope + 1000 * t1 * Let constant c1 = (-1000 / slope) * milli_Tmeas = (n1 - Nmeas) * c1 + 1000 * t1 * Let constant c2 = n1 *c1 + 1000 * t1 * milli_Tmeas = c2 - Nmeas * c1 */ temp64 = FACTOR0; temp64 *= 1000; do_div(temp64, FACTOR1 * n1 - FACTOR2); data->c1 = temp64; data->c2 = n1 * data->c1 + 1000 * t1; /* use OTP for thermal grade */ ret = regmap_read(map, OCOTP_MEM0, &val); if (ret) { dev_err(&pdev->dev, "failed to read temp grade: %d\n", ret); return ret; } /* The maximum die temp is specified by the Temperature Grade */ switch ((val >> 6) & 0x3) { case 0: /* Commercial (0 to 95C) */ data->temp_grade = "Commercial"; data->temp_max = 95000; break; case 1: /* Extended Commercial (-20 to 105C) */ data->temp_grade = "Extended Commercial"; data->temp_max = 105000; break; case 2: /* Industrial (-40 to 105C) */ data->temp_grade = "Industrial"; data->temp_max = 105000; break; case 3: /* Automotive (-40 to 125C) */ data->temp_grade = "Automotive"; data->temp_max = 125000; break; } /* * Set the critical trip point at 5C under max * Set the passive trip point at 10C under max (can change via sysfs) */ data->temp_critical = data->temp_max - (1000 * 5); data->temp_passive = data->temp_max - (1000 * 10); return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Shawn Guo17149.85%120.00%
Tim Harvey13037.90%120.00%
Anson Huang319.04%240.00%
Philipp Zabel113.21%120.00%
Total343100.00%5100.00%


static irqreturn_t imx_thermal_alarm_irq(int irq, void *dev) { struct imx_thermal_data *data = dev; disable_irq_nosync(irq); data->irq_enabled = false; return IRQ_WAKE_THREAD; }

Contributors

PersonTokensPropCommitsCommitProp
Philipp Zabel34100.00%1100.00%
Total34100.00%1100.00%


static irqreturn_t imx_thermal_alarm_irq_thread(int irq, void *dev) { struct imx_thermal_data *data = dev; dev_dbg(&data->tz->device, "THERMAL ALARM: T > %d\n", data->alarm_temp / 1000); thermal_zone_device_update(data->tz, THERMAL_EVENT_UNSPECIFIED); return IRQ_HANDLED; }

Contributors

PersonTokensPropCommitsCommitProp
Philipp Zabel4794.00%133.33%
Srinivas Pandruvada24.00%133.33%
Sascha Hauer12.00%133.33%
Total50100.00%3100.00%

static const struct of_device_id of_imx_thermal_match[] = { { .compatible = "fsl,imx6q-tempmon", .data = &thermal_imx6q_data, }, { .compatible = "fsl,imx6sx-tempmon", .data = &thermal_imx6sx_data, }, { /* end */ } }; MODULE_DEVICE_TABLE(of, of_imx_thermal_match);
static int imx_thermal_probe(struct platform_device *pdev) { struct imx_thermal_data *data; struct regmap *map; int measure_freq; int ret; data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); if (!data) return -ENOMEM; map = syscon_regmap_lookup_by_phandle(pdev->dev.of_node, "fsl,tempmon"); if (IS_ERR(map)) { ret = PTR_ERR(map); dev_err(&pdev->dev, "failed to get tempmon regmap: %d\n", ret); return ret; } data->tempmon = map; data->socdata = of_device_get_match_data(&pdev->dev); if (!data->socdata) { dev_err(&pdev->dev, "no device match found\n"); return -ENODEV; } /* make sure the IRQ flag is clear before enabling irq on i.MX6SX */ if (data->socdata->version == TEMPMON_IMX6SX) { regmap_write(map, MISC1 + REG_CLR, MISC1_IRQ_TEMPHIGH | MISC1_IRQ_TEMPLOW | MISC1_IRQ_TEMPPANIC); /* * reset value of LOW ALARM is incorrect, set it to lowest * value to avoid false trigger of low alarm. */ regmap_write(map, TEMPSENSE2 + REG_SET, TEMPSENSE2_LOW_VALUE_MASK); } data->irq = platform_get_irq(pdev, 0); if (data->irq < 0) return data->irq; platform_set_drvdata(pdev, data); ret = imx_get_sensor_data(pdev); if (ret) { dev_err(&pdev->dev, "failed to get sensor data\n"); return ret; } /* Make sure sensor is in known good state for measurements */ regmap_write(map, TEMPSENSE0 + REG_CLR, TEMPSENSE0_POWER_DOWN); regmap_write(map, TEMPSENSE0 + REG_CLR, TEMPSENSE0_MEASURE_TEMP); regmap_write(map, TEMPSENSE1 + REG_CLR, TEMPSENSE1_MEASURE_FREQ); regmap_write(map, MISC0 + REG_SET, MISC0_REFTOP_SELBIASOFF); regmap_write(map, TEMPSENSE0 + REG_SET, TEMPSENSE0_POWER_DOWN); data->policy = cpufreq_cpu_get(0); if (!data->policy) { pr_debug("%s: CPUFreq policy not found\n", __func__); return -EPROBE_DEFER; } data->cdev = cpufreq_cooling_register(data->policy); if (IS_ERR(data->cdev)) { ret = PTR_ERR(data->cdev); dev_err(&pdev->dev, "failed to register cpufreq cooling device: %d\n", ret); cpufreq_cpu_put(data->policy); return ret; } data->thermal_clk = devm_clk_get(&pdev->dev, NULL); if (IS_ERR(data->thermal_clk)) { ret = PTR_ERR(data->thermal_clk); if (ret != -EPROBE_DEFER) dev_err(&pdev->dev, "failed to get thermal clk: %d\n", ret); cpufreq_cooling_unregister(data->cdev); cpufreq_cpu_put(data->policy); return ret; } /* * Thermal sensor needs clk on to get correct value, normally * we should enable its clk before taking measurement and disable * clk after measurement is done, but if alarm function is enabled, * hardware will auto measure the temperature periodically, so we * need to keep the clk always on for alarm function. */ ret = clk_prepare_enable(data->thermal_clk); if (ret) { dev_err(&pdev->dev, "failed to enable thermal clk: %d\n", ret); cpufreq_cooling_unregister(data->cdev); cpufreq_cpu_put(data->policy); return ret; } data->tz = thermal_zone_device_register("imx_thermal_zone", IMX_TRIP_NUM, BIT(IMX_TRIP_PASSIVE), data, &imx_tz_ops, NULL, IMX_PASSIVE_DELAY, IMX_POLLING_DELAY); if (IS_ERR(data->tz)) { ret = PTR_ERR(data->tz); dev_err(&pdev->dev, "failed to register thermal zone device %d\n", ret); clk_disable_unprepare(data->thermal_clk); cpufreq_cooling_unregister(data->cdev); cpufreq_cpu_put(data->policy); return ret; } dev_info(&pdev->dev, "%s CPU temperature grade - max:%dC" " critical:%dC passive:%dC\n", data->temp_grade, data->temp_max / 1000, data->temp_critical / 1000, data->temp_passive / 1000); /* Enable measurements at ~ 10 Hz */ regmap_write(map, TEMPSENSE1 + REG_CLR, TEMPSENSE1_MEASURE_FREQ); measure_freq = DIV_ROUND_UP(32768, 10); /* 10 Hz */ regmap_write(map, TEMPSENSE1 + REG_SET, measure_freq); imx_set_alarm_temp(data, data->temp_passive); if (data->socdata->version == TEMPMON_IMX6SX) imx_set_panic_temp(data, data->temp_critical); regmap_write(map, TEMPSENSE0 + REG_CLR, TEMPSENSE0_POWER_DOWN); regmap_write(map, TEMPSENSE0 + REG_SET, TEMPSENSE0_MEASURE_TEMP); ret = devm_request_threaded_irq(&pdev->dev, data->irq, imx_thermal_alarm_irq, imx_thermal_alarm_irq_thread, 0, "imx_thermal", data); if (ret < 0) { dev_err(&pdev->dev, "failed to request alarm irq: %d\n", ret); clk_disable_unprepare(data->thermal_clk); thermal_zone_device_unregister(data->tz); cpufreq_cooling_unregister(data->cdev); cpufreq_cpu_put(data->policy); return ret; } data->irq_enabled = true; data->mode = THERMAL_DEVICE_ENABLED; return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Shawn Guo28937.15%19.09%
Anson Huang10513.50%218.18%
Philipp Zabel9812.60%218.18%
Heiner Kallweit8911.44%19.09%
Bai Ping688.74%19.09%
Viresh Kumar678.61%19.09%
Tim Harvey334.24%19.09%
Shailendra Verma232.96%19.09%
Corentin Labbe60.77%19.09%
Total778100.00%11100.00%


static int imx_thermal_remove(struct platform_device *pdev) { struct imx_thermal_data *data = platform_get_drvdata(pdev); struct regmap *map = data->tempmon; /* Disable measurements */ regmap_write(map, TEMPSENSE0 + REG_SET, TEMPSENSE0_POWER_DOWN); if (!IS_ERR(data->thermal_clk)) clk_disable_unprepare(data->thermal_clk); thermal_zone_device_unregister(data->tz); cpufreq_cooling_unregister(data->cdev); cpufreq_cpu_put(data->policy); return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Shawn Guo3845.78%125.00%
Philipp Zabel2125.30%125.00%
Anson Huang1720.48%125.00%
Viresh Kumar78.43%125.00%
Total83100.00%4100.00%

#ifdef CONFIG_PM_SLEEP
static int imx_thermal_suspend(struct device *dev) { struct imx_thermal_data *data = dev_get_drvdata(dev); struct regmap *map = data->tempmon; /* * Need to disable thermal sensor, otherwise, when thermal core * try to get temperature before thermal sensor resume, a wrong * temperature will be read as the thermal sensor is powered * down. */ regmap_write(map, TEMPSENSE0 + REG_CLR, TEMPSENSE0_MEASURE_TEMP); regmap_write(map, TEMPSENSE0 + REG_SET, TEMPSENSE0_POWER_DOWN); data->mode = THERMAL_DEVICE_DISABLED; clk_disable_unprepare(data->thermal_clk); return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Shawn Guo4768.12%133.33%
Anson Huang2231.88%266.67%
Total69100.00%3100.00%


static int imx_thermal_resume(struct device *dev) { struct imx_thermal_data *data = dev_get_drvdata(dev); struct regmap *map = data->tempmon; int ret; ret = clk_prepare_enable(data->thermal_clk); if (ret) return ret; /* Enabled thermal sensor after resume */ regmap_write(map, TEMPSENSE0 + REG_CLR, TEMPSENSE0_POWER_DOWN); regmap_write(map, TEMPSENSE0 + REG_SET, TEMPSENSE0_MEASURE_TEMP); data->mode = THERMAL_DEVICE_ENABLED; return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Anson Huang5567.90%250.00%
Shawn Guo1417.28%125.00%
Arvind Yadav1214.81%125.00%
Total81100.00%4100.00%

#endif static SIMPLE_DEV_PM_OPS(imx_thermal_pm_ops, imx_thermal_suspend, imx_thermal_resume); static struct platform_driver imx_thermal = { .driver = { .name = "imx_thermal", .pm = &imx_thermal_pm_ops, .of_match_table = of_imx_thermal_match, }, .probe = imx_thermal_probe, .remove = imx_thermal_remove, }; module_platform_driver(imx_thermal); MODULE_AUTHOR("Freescale Semiconductor, Inc."); MODULE_DESCRIPTION("Thermal driver for Freescale i.MX SoCs"); MODULE_LICENSE("GPL v2"); MODULE_ALIAS("platform:imx-thermal");

Overall Contributors

PersonTokensPropCommitsCommitProp
Shawn Guo132145.10%15.00%
Philipp Zabel66022.53%210.00%
Anson Huang46515.88%630.00%
Tim Harvey1806.15%15.00%
Heiner Kallweit893.04%15.00%
Viresh Kumar822.80%15.00%
Bai Ping682.32%15.00%
Shailendra Verma230.79%15.00%
Sascha Hauer130.44%15.00%
Arvind Yadav120.41%15.00%
Corentin Labbe60.20%15.00%
Srinivas Pandruvada40.14%15.00%
Dan Carpenter40.14%15.00%
Kapileshwar Singh20.07%15.00%
Total2929100.00%20100.00%
Directory: drivers/thermal
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with cregit.