cregit-Linux how code gets into the kernel

Release 4.14 drivers/video/backlight/ltv350qv.c

/*
 * Power control for Samsung LTV350QV Quarter VGA LCD Panel
 *
 * Copyright (C) 2006, 2007 Atmel Corporation
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/fb.h>
#include <linux/init.h>
#include <linux/lcd.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/spi/spi.h>

#include "ltv350qv.h"


#define POWER_IS_ON(pwr)	((pwr) <= FB_BLANK_NORMAL)


struct ltv350qv {
	
struct spi_device	*spi;
	
u8			*buffer;
	
int			power;
	
struct lcd_device	*ld;
};

/*
 * The power-on and power-off sequences are taken from the
 * LTV350QV-F04 data sheet from Samsung. The register definitions are
 * taken from the S6F2002 command list also from Samsung. Both
 * documents are distributed with the AVR32 Linux BSP CD from Atmel.
 *
 * There's still some voodoo going on here, but it's a lot better than
 * in the first incarnation of the driver where all we had was the raw
 * numbers from the initialization sequence.
 */

static int ltv350qv_write_reg(struct ltv350qv *lcd, u8 reg, u16 val) { struct spi_message msg; struct spi_transfer index_xfer = { .len = 3, .cs_change = 1, }; struct spi_transfer value_xfer = { .len = 3, }; spi_message_init(&msg); /* register index */ lcd->buffer[0] = LTV_OPC_INDEX; lcd->buffer[1] = 0x00; lcd->buffer[2] = reg & 0x7f; index_xfer.tx_buf = lcd->buffer; spi_message_add_tail(&index_xfer, &msg); /* register value */ lcd->buffer[4] = LTV_OPC_DATA; lcd->buffer[5] = val >> 8; lcd->buffer[6] = val; value_xfer.tx_buf = lcd->buffer + 4; spi_message_add_tail(&value_xfer, &msg); return spi_sync(lcd->spi, &msg); }

Contributors

PersonTokensPropCommitsCommitProp
Håvard Skinnemoen161100.00%1100.00%
Total161100.00%1100.00%

/* The comments are taken straight from the data sheet */
static int ltv350qv_power_on(struct ltv350qv *lcd) { int ret; /* Power On Reset Display off State */ if (ltv350qv_write_reg(lcd, LTV_PWRCTL1, 0x0000)) goto err; usleep_range(15000, 16000); /* Power Setting Function 1 */ if (ltv350qv_write_reg(lcd, LTV_PWRCTL1, LTV_VCOM_DISABLE)) goto err; if (ltv350qv_write_reg(lcd, LTV_PWRCTL2, LTV_VCOML_ENABLE)) goto err_power1; /* Power Setting Function 2 */ if (ltv350qv_write_reg(lcd, LTV_PWRCTL1, LTV_VCOM_DISABLE | LTV_DRIVE_CURRENT(5) | LTV_SUPPLY_CURRENT(5))) goto err_power2; msleep(55); /* Instruction Setting */ ret = ltv350qv_write_reg(lcd, LTV_IFCTL, LTV_NMD | LTV_REV | LTV_NL(0x1d)); ret |= ltv350qv_write_reg(lcd, LTV_DATACTL, LTV_DS_SAME | LTV_CHS_480 | LTV_DF_RGB | LTV_RGB_BGR); ret |= ltv350qv_write_reg(lcd, LTV_ENTRY_MODE, LTV_VSPL_ACTIVE_LOW | LTV_HSPL_ACTIVE_LOW | LTV_DPL_SAMPLE_RISING | LTV_EPL_ACTIVE_LOW | LTV_SS_RIGHT_TO_LEFT); ret |= ltv350qv_write_reg(lcd, LTV_GATECTL1, LTV_CLW(3)); ret |= ltv350qv_write_reg(lcd, LTV_GATECTL2, LTV_NW_INV_1LINE | LTV_FWI(3)); ret |= ltv350qv_write_reg(lcd, LTV_VBP, 0x000a); ret |= ltv350qv_write_reg(lcd, LTV_HBP, 0x0021); ret |= ltv350qv_write_reg(lcd, LTV_SOTCTL, LTV_SDT(3) | LTV_EQ(0)); ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(0), 0x0103); ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(1), 0x0301); ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(2), 0x1f0f); ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(3), 0x1f0f); ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(4), 0x0707); ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(5), 0x0307); ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(6), 0x0707); ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(7), 0x0000); ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(8), 0x0004); ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(9), 0x0000); if (ret) goto err_settings; /* Wait more than 2 frames */ msleep(20); /* Display On Sequence */ ret = ltv350qv_write_reg(lcd, LTV_PWRCTL1, LTV_VCOM_DISABLE | LTV_VCOMOUT_ENABLE | LTV_POWER_ON | LTV_DRIVE_CURRENT(5) | LTV_SUPPLY_CURRENT(5)); ret |= ltv350qv_write_reg(lcd, LTV_GATECTL2, LTV_NW_INV_1LINE | LTV_DSC | LTV_FWI(3)); if (ret) goto err_disp_on; /* Display should now be ON. Phew. */ return 0; err_disp_on: /* * Try to recover. Error handling probably isn't very useful * at this point, just make a best effort to switch the panel * off. */ ltv350qv_write_reg(lcd, LTV_PWRCTL1, LTV_VCOM_DISABLE | LTV_DRIVE_CURRENT(5) | LTV_SUPPLY_CURRENT(5)); ltv350qv_write_reg(lcd, LTV_GATECTL2, LTV_NW_INV_1LINE | LTV_FWI(3)); err_settings: err_power2: err_power1: ltv350qv_write_reg(lcd, LTV_PWRCTL2, 0x0000); usleep_range(1000, 1100); err: ltv350qv_write_reg(lcd, LTV_PWRCTL1, LTV_VCOM_DISABLE); return -EIO; }

Contributors

PersonTokensPropCommitsCommitProp
Håvard Skinnemoen49498.41%150.00%
Jingoo Han81.59%150.00%
Total502100.00%2100.00%


static int ltv350qv_power_off(struct ltv350qv *lcd) { int ret; /* Display Off Sequence */ ret = ltv350qv_write_reg(lcd, LTV_PWRCTL1, LTV_VCOM_DISABLE | LTV_DRIVE_CURRENT(5) | LTV_SUPPLY_CURRENT(5)); ret |= ltv350qv_write_reg(lcd, LTV_GATECTL2, LTV_NW_INV_1LINE | LTV_FWI(3)); /* Power down setting 1 */ ret |= ltv350qv_write_reg(lcd, LTV_PWRCTL2, 0x0000); /* Wait at least 1 ms */ usleep_range(1000, 1100); /* Power down setting 2 */ ret |= ltv350qv_write_reg(lcd, LTV_PWRCTL1, LTV_VCOM_DISABLE); /* * No point in trying to recover here. If we can't switch the * panel off, what are we supposed to do other than inform the * user about the failure? */ if (ret) return -EIO; /* Display power should now be OFF */ return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Håvard Skinnemoen9395.88%150.00%
Jingoo Han44.12%150.00%
Total97100.00%2100.00%


static int ltv350qv_power(struct ltv350qv *lcd, int power) { int ret = 0; if (POWER_IS_ON(power) && !POWER_IS_ON(lcd->power)) ret = ltv350qv_power_on(lcd); else if (!POWER_IS_ON(power) && POWER_IS_ON(lcd->power)) ret = ltv350qv_power_off(lcd); if (!ret) lcd->power = power; return ret; }

Contributors

PersonTokensPropCommitsCommitProp
Håvard Skinnemoen78100.00%1100.00%
Total78100.00%1100.00%


static int ltv350qv_set_power(struct lcd_device *ld, int power) { struct ltv350qv *lcd = lcd_get_data(ld); return ltv350qv_power(lcd, power); }

Contributors

PersonTokensPropCommitsCommitProp
Håvard Skinnemoen32100.00%1100.00%
Total32100.00%1100.00%


static int ltv350qv_get_power(struct lcd_device *ld) { struct ltv350qv *lcd = lcd_get_data(ld); return lcd->power; }

Contributors

PersonTokensPropCommitsCommitProp
Håvard Skinnemoen26100.00%1100.00%
Total26100.00%1100.00%

static struct lcd_ops ltv_ops = { .get_power = ltv350qv_get_power, .set_power = ltv350qv_set_power, };
static int ltv350qv_probe(struct spi_device *spi) { struct ltv350qv *lcd; struct lcd_device *ld; int ret; lcd = devm_kzalloc(&spi->dev, sizeof(struct ltv350qv), GFP_KERNEL); if (!lcd) return -ENOMEM; lcd->spi = spi; lcd->power = FB_BLANK_POWERDOWN; lcd->buffer = devm_kzalloc(&spi->dev, 8, GFP_KERNEL); if (!lcd->buffer) return -ENOMEM; ld = devm_lcd_device_register(&spi->dev, "ltv350qv", &spi->dev, lcd, &ltv_ops); if (IS_ERR(ld)) return PTR_ERR(ld); lcd->ld = ld; ret = ltv350qv_power(lcd, FB_BLANK_UNBLANK); if (ret) return ret; spi_set_drvdata(spi, lcd); return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Håvard Skinnemoen12277.71%120.00%
Jingoo Han2616.56%360.00%
Axel Lin95.73%120.00%
Total157100.00%5100.00%


static int ltv350qv_remove(struct spi_device *spi) { struct ltv350qv *lcd = spi_get_drvdata(spi); ltv350qv_power(lcd, FB_BLANK_POWERDOWN); return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Håvard Skinnemoen3096.77%150.00%
Jingoo Han13.23%150.00%
Total31100.00%2100.00%

#ifdef CONFIG_PM_SLEEP
static int ltv350qv_suspend(struct device *dev) { struct ltv350qv *lcd = dev_get_drvdata(dev); return ltv350qv_power(lcd, FB_BLANK_POWERDOWN); }

Contributors

PersonTokensPropCommitsCommitProp
Håvard Skinnemoen2586.21%150.00%
Jingoo Han413.79%150.00%
Total29100.00%2100.00%


static int ltv350qv_resume(struct device *dev) { struct ltv350qv *lcd = dev_get_drvdata(dev); return ltv350qv_power(lcd, FB_BLANK_UNBLANK); }

Contributors

PersonTokensPropCommitsCommitProp
Håvard Skinnemoen2586.21%150.00%
Jingoo Han413.79%150.00%
Total29100.00%2100.00%

#endif static SIMPLE_DEV_PM_OPS(ltv350qv_pm_ops, ltv350qv_suspend, ltv350qv_resume); /* Power down all displays on reboot, poweroff or halt */
static void ltv350qv_shutdown(struct spi_device *spi) { struct ltv350qv *lcd = spi_get_drvdata(spi); ltv350qv_power(lcd, FB_BLANK_POWERDOWN); }

Contributors

PersonTokensPropCommitsCommitProp
Håvard Skinnemoen2796.43%150.00%
Jingoo Han13.57%150.00%
Total28100.00%2100.00%

static struct spi_driver ltv350qv_driver = { .driver = { .name = "ltv350qv", .pm = &ltv350qv_pm_ops, }, .probe = ltv350qv_probe, .remove = ltv350qv_remove, .shutdown = ltv350qv_shutdown, }; module_spi_driver(ltv350qv_driver); MODULE_AUTHOR("Haavard Skinnemoen (Atmel)"); MODULE_DESCRIPTION("Samsung LTV350QV LCD Driver"); MODULE_LICENSE("GPL"); MODULE_ALIAS("spi:ltv350qv");

Overall Contributors

PersonTokensPropCommitsCommitProp
Håvard Skinnemoen124293.74%19.09%
Jingoo Han634.75%545.45%
Axel Lin110.83%218.18%
Anton Vorontsov50.38%19.09%
Tejun Heo30.23%19.09%
Jean Delvare10.08%19.09%
Total1325100.00%11100.00%
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with cregit.