cregit-Linux how code gets into the kernel

Release 4.15 arch/arm/mach-ep93xx/snappercl15.c

/*
 * arch/arm/mach-ep93xx/snappercl15.c
 * Bluewater Systems Snapper CL15 system module
 *
 * Copyright (C) 2009 Bluewater Systems Ltd
 * Author: Ryan Mallon
 *
 * NAND code adapted from driver by:
 *   Andre Renaud <andre@bluewatersys.com>
 *   James R. McKaskill
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or (at
 * your option) any later version.
 *
 */

#include <linux/platform_device.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/i2c.h>
#include <linux/fb.h>

#include <linux/mtd/partitions.h>
#include <linux/mtd/rawnand.h>

#include <mach/hardware.h>
#include <linux/platform_data/video-ep93xx.h>
#include <mach/gpio-ep93xx.h>

#include <asm/mach-types.h>
#include <asm/mach/arch.h>

#include "soc.h"


#define SNAPPERCL15_NAND_BASE	(EP93XX_CS7_PHYS_BASE + SZ_16M)


#define SNAPPERCL15_NAND_WPN	(1 << 8)  
/* Write protect (active low) */

#define SNAPPERCL15_NAND_ALE	(1 << 9)  
/* Address latch */

#define SNAPPERCL15_NAND_CLE	(1 << 10) 
/* Command latch */

#define SNAPPERCL15_NAND_CEN	(1 << 11) 
/* Chip enable (active low) */

#define SNAPPERCL15_NAND_RDY	(1 << 14) 
/* Device ready */


#define NAND_CTRL_ADDR(chip) 	(chip->IO_ADDR_W + 0x40)


static void snappercl15_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl) { struct nand_chip *chip = mtd_to_nand(mtd); static u16 nand_state = SNAPPERCL15_NAND_WPN; u16 set; if (ctrl & NAND_CTRL_CHANGE) { set = SNAPPERCL15_NAND_CEN | SNAPPERCL15_NAND_WPN; if (ctrl & NAND_NCE) set &= ~SNAPPERCL15_NAND_CEN; if (ctrl & NAND_CLE) set |= SNAPPERCL15_NAND_CLE; if (ctrl & NAND_ALE) set |= SNAPPERCL15_NAND_ALE; nand_state &= ~(SNAPPERCL15_NAND_CEN | SNAPPERCL15_NAND_CLE | SNAPPERCL15_NAND_ALE); nand_state |= set; __raw_writew(nand_state, NAND_CTRL_ADDR(chip)); } if (cmd != NAND_CMD_NONE) __raw_writew((cmd & 0xff) | nand_state, chip->IO_ADDR_W); }

Contributors

PersonTokensPropCommitsCommitProp
Ryan Mallon12597.66%150.00%
Boris Brezillon32.34%150.00%
Total128100.00%2100.00%


static int snappercl15_nand_dev_ready(struct mtd_info *mtd) { struct nand_chip *chip = mtd_to_nand(mtd); return !!(__raw_readw(NAND_CTRL_ADDR(chip)) & SNAPPERCL15_NAND_RDY); }

Contributors

PersonTokensPropCommitsCommitProp
Ryan Mallon3391.67%150.00%
Boris Brezillon38.33%150.00%
Total36100.00%2100.00%

static struct mtd_partition snappercl15_nand_parts[] = { { .name = "Kernel", .offset = 0, .size = SZ_2M, }, { .name = "Filesystem", .offset = MTDPART_OFS_APPEND, .size = MTDPART_SIZ_FULL, }, }; static struct platform_nand_data snappercl15_nand_data = { .chip = { .nr_chips = 1, .partitions = snappercl15_nand_parts, .nr_partitions = ARRAY_SIZE(snappercl15_nand_parts), .chip_delay = 25, }, .ctrl = { .dev_ready = snappercl15_nand_dev_ready, .cmd_ctrl = snappercl15_nand_cmd_ctrl, }, }; static struct resource snappercl15_nand_resource[] = { { .start = SNAPPERCL15_NAND_BASE, .end = SNAPPERCL15_NAND_BASE + SZ_4K - 1, .flags = IORESOURCE_MEM, }, }; static struct platform_device snappercl15_nand_device = { .name = "gen_nand", .id = -1, .dev.platform_data = &snappercl15_nand_data, .resource = snappercl15_nand_resource, .num_resources = ARRAY_SIZE(snappercl15_nand_resource), }; static struct ep93xx_eth_data __initdata snappercl15_eth_data = { .phy_id = 1, }; static struct i2c_board_info __initdata snappercl15_i2c_data[] = { { /* Audio codec */ I2C_BOARD_INFO("tlv320aic23", 0x1a), }, }; static struct ep93xxfb_mach_info __initdata snappercl15_fb_info = { }; static struct platform_device snappercl15_audio_device = { .name = "snappercl15-audio", .id = -1, };
static void __init snappercl15_register_audio(void) { ep93xx_register_i2s(); platform_device_register(&snappercl15_audio_device); }

Contributors

PersonTokensPropCommitsCommitProp
Mika Westerberg18100.00%1100.00%
Total18100.00%1100.00%


static void __init snappercl15_init_machine(void) { ep93xx_init_devices(); ep93xx_register_eth(&snappercl15_eth_data, 1); ep93xx_register_i2c(snappercl15_i2c_data, ARRAY_SIZE(snappercl15_i2c_data)); ep93xx_register_fb(&snappercl15_fb_info); snappercl15_register_audio(); platform_device_register(&snappercl15_nand_device); }

Contributors

PersonTokensPropCommitsCommitProp
Ryan Mallon4497.78%266.67%
Mika Westerberg12.22%133.33%
Total45100.00%3100.00%

MACHINE_START(SNAPPER_CL15, "Bluewater Systems Snapper CL15") /* Maintainer: Ryan Mallon */ .atag_offset = 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, .init_time = ep93xx_timer_init, .init_machine = snappercl15_init_machine, .init_late = ep93xx_init_late, .restart = ep93xx_restart, MACHINE_END

Overall Contributors

PersonTokensPropCommitsCommitProp
Ryan Mallon50388.71%426.67%
Mika Westerberg376.53%16.67%
Boris Brezillon71.23%213.33%
Russell King50.88%16.67%
Shawn Guo50.88%16.67%
Linus Walleij40.71%213.33%
Stephen Warren20.35%16.67%
H Hartley Sweeten20.35%16.67%
Arnd Bergmann10.18%16.67%
Nico Pitre10.18%16.67%
Total567100.00%15100.00%
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with cregit.