Release 4.16 drivers/tty/serial/8250/8250_dw.c

// SPDX-License-Identifier: GPL-2.0+
/*
 * Synopsys DesignWare 8250 driver.
 *
 * Copyright 2011 Picochip, Jamie Iles.
 * Copyright 2013 Intel Corporation
 *
 * The Synopsys DesignWare 8250 has an extra feature whereby it detects if the
 * LCR is written whilst busy.  If it is, then a busy detect interrupt is
 * raised, the LCR needs to be rewritten and the uart status register read.
 */
#include <linux/device.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/serial_8250.h>
#include <linux/serial_reg.h>
#include <linux/of.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/acpi.h>
#include <linux/clk.h>
#include <linux/reset.h>
#include <linux/pm_runtime.h>

#include <asm/byteorder.h>

#include "8250.h"

/* Offsets for the DesignWare specific registers */

#define DW_UART_USR	0x1f 
/* UART Status Register */

#define DW_UART_CPR	0xf4 
/* Component Parameter Register */

#define DW_UART_UCV	0xf8 
/* UART Component Version */

/* Component Parameter Register bits */

#define DW_UART_CPR_ABP_DATA_WIDTH	(3 << 0)

#define DW_UART_CPR_AFCE_MODE		(1 << 4)

#define DW_UART_CPR_THRE_MODE		(1 << 5)

#define DW_UART_CPR_SIR_MODE		(1 << 6)

#define DW_UART_CPR_SIR_LP_MODE		(1 << 7)

#define DW_UART_CPR_ADDITIONAL_FEATURES	(1 << 8)

#define DW_UART_CPR_FIFO_ACCESS		(1 << 9)

#define DW_UART_CPR_FIFO_STAT		(1 << 10)

#define DW_UART_CPR_SHADOW		(1 << 11)

#define DW_UART_CPR_ENCODED_PARMS	(1 << 12)

#define DW_UART_CPR_DMA_EXTRA		(1 << 13)

#define DW_UART_CPR_FIFO_MODE		(0xff << 16)
/* Helper for fifo size calculation */

#define DW_UART_CPR_FIFO_SIZE(a)	(((a >> 16) & 0xff) * 16)

/* DesignWare specific register fields */

#define DW_UART_MCR_SIRE		BIT(6)


struct dw8250_data {
	
u8			usr_reg;
	
int			line;
	
int			msr_mask_on;
	
int			msr_mask_off;
	
struct clk		*clk;
	
struct clk		*pclk;
	
struct reset_control	*rst;
	
struct uart_8250_dma	dma;

	
unsigned int		skip_autocfg:1;
	
unsigned int		uart_16550_compatible:1;
};



static inline int dw8250_modify_msr(struct uart_port *p, int offset, int value)
{
	struct dw8250_data *d = p->private_data;

	/* Override any modem control signals if needed */
	if (offset == UART_MSR) {
		value |= d->msr_mask_on;
		value &= ~d->msr_mask_off;
	}

	return value;
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
Tim Kryger
30
57.69%
1
50.00%
Desmond Liu
22
42.31%
1
50.00%
Total
52
100.00%
2
100.00%



static void dw8250_force_idle(struct uart_port *p)
{
	struct uart_8250_port *up = up_to_u8250p(p);

	serial8250_clear_and_reinit_fifos(up);
	(void)p->serial_in(p, UART_RX);
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
Tim Kryger
28
73.68%
1
50.00%
Andy Shevchenko
10
26.32%
1
50.00%
Total
38
100.00%
2
100.00%



static void dw8250_check_lcr(struct uart_port *p, int value)
{
	void __iomem *offset = p->membase + (UART_LCR << p->regshift);
	int tries = 1000;

	/* Make sure LCR write wasn't ignored */
	while (tries--) {
		unsigned int lcr = p->serial_in(p, UART_LCR);

		if ((value & ~UART_LCR_SPAR) == (lcr & ~UART_LCR_SPAR))
			return;

		dw8250_force_idle(p);

#ifdef CONFIG_64BIT
		if (p->type == PORT_OCTEON)
			__raw_writeq(value & 0xff, offset);
		else
#endif
		if (p->iotype == UPIO_MEM32)
			writel(value, offset);
		else if (p->iotype == UPIO_MEM32BE)
			iowrite32be(value, offset);
		else
			writeb(value, offset);
	}
	/*
         * FIXME: this deadlocks if port->lock is already held
         * dev_err(p->dev, "Couldn't set LCR to %d\n", value);
         */
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
Noam Camus
63
44.37%
2
33.33%
Tim Kryger
35
24.65%
1
16.67%
James Hogan
20
14.08%
1
16.67%
Jamie Iles
13
9.15%
1
16.67%
Kefeng Wang
11
7.75%
1
16.67%
Total
142
100.00%
6
100.00%



static void dw8250_serial_out(struct uart_port *p, int offset, int value)
{
	struct dw8250_data *d = p->private_data;

	writeb(value, p->membase + (offset << p->regshift));

	if (offset == UART_LCR && !d->uart_16550_compatible)
		dw8250_check_lcr(p, value);
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
Noam Camus
44
72.13%
1
25.00%
Jamie Iles
10
16.39%
1
25.00%
Tim Kryger
7
11.48%
2
50.00%
Total
61
100.00%
4
100.00%



static unsigned int dw8250_serial_in(struct uart_port *p, int offset)
{
	unsigned int value = readb(p->membase + (offset << p->regshift));

	return dw8250_modify_msr(p, offset, value);
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
Jamie Iles
25
56.82%
1
50.00%
Tim Kryger
19
43.18%
1
50.00%
Total
44
100.00%
2
100.00%

#ifdef CONFIG_64BIT


static unsigned int dw8250_serial_inq(struct uart_port *p, int offset)
{
	unsigned int value;

	value = (u8)__raw_readq(p->membase + (offset << p->regshift));

	return dw8250_modify_msr(p, offset, value);
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
David Daney
49
100.00%
1
100.00%
Total
49
100.00%
1
100.00%



static void dw8250_serial_outq(struct uart_port *p, int offset, int value)
{
	struct dw8250_data *d = p->private_data;

	value &= 0xff;
	__raw_writeq(value, p->membase + (offset << p->regshift));
	/* Read back to ensure register write ordering. */
	__raw_readq(p->membase + (UART_LCR << p->regshift));

	if (offset == UART_LCR && !d->uart_16550_compatible)
		dw8250_check_lcr(p, value);
}
Contributors
Person
Tokens
Prop
Commits
CommitProp
David Daney
66
81.48%
2
66.67%
Noam Camus
15
18.52%
1
33.33%
Total
81
100.00%
3
100.00%

#endif /* CONFIG_64BIT */



static void dw8250_serial_out32(struct uart_port *p, int offset, int value)
{
	struct dw8250_data *d = p->private_data;

	writel(value, p->membase + (offset << p->regshift));

	if (offset == UART_LCR && !d->uart_16550_compatible)
		dw8250_check_lcr(p, value);
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
Tim Kryger
25
40.98%
2
50.00%
Jamie Iles
21
34.43%
1
25.00%
Noam Camus
15
24.59%
1
25.00%
Total
61
100.00%
4
100.00%



static unsigned int dw8250_serial_in32(struct uart_port *p, int offset)
{
	unsigned int value = readl(p->membase + (offset << p->regshift));

	return dw8250_modify_msr(p, offset, value);
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
Jamie Iles
25
56.82%
1
50.00%
Tim Kryger
19
43.18%
1
50.00%
Total
44
100.00%
2
100.00%



static void dw8250_serial_out32be(struct uart_port *p, int offset, int value)
{
	struct dw8250_data *d = p->private_data;

	iowrite32be(value, p->membase + (offset << p->regshift));

	if (offset == UART_LCR && !d->uart_16550_compatible)
		dw8250_check_lcr(p, value);
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
Noam Camus
61
100.00%
1
100.00%
Total
61
100.00%
1
100.00%



static unsigned int dw8250_serial_in32be(struct uart_port *p, int offset)
{
       unsigned int value = ioread32be(p->membase + (offset << p->regshift));

       return dw8250_modify_msr(p, offset, value);
}


Contributors
Person
Tokens
Prop
Commits
CommitProp
Noam Camus
44
100.00%
1
100.00%
Total
44
100.00%
1
100.00%



static int dw8250_handle_irq(struct uart_port *p)
{
	struct uart_8250_port *up = up_to_u8250p(p);
	struct dw8250_data *d = p->private_data;
	unsigned int iir = p->serial_in(p, UART_IIR);
	unsigned int status;
	unsigned long flags;

	/*
         * There are ways to get Designware-based UARTs into a state where
         * they are asserting UART_IIR_RX_TIMEOUT but there is no actual
         * data available.  If we see such a case then we'll do a bogus
         * read.  If we don't do this then the "RX TIMEOUT" interrupt will
         * fire forever.
         *
         * This problem has only been observed so far when not in DMA mode
         * so we limit the workaround only to non-DMA mode.
         */
	if (!up->dma && ((iir & 0x3f) == UART_IIR_RX_TIMEOUT)) {
		spin_lock_irqsave(&p->lock, flags);
		status = p->serial_in(p, UART_LSR);

		if (!(status & (UART_LSR_DR | UART_LSR_BI)))
			(void) p->serial_in(p, UART_RX);

		spin_unlock_irqrestore(&p->lock, flags);
	}

	if (serial8250_handle_irq(p, iir))
		return 1;

	if ((iir & UART_IIR_BUSY) == UART_IIR_BUSY) {
		/* Clear the USR */
		(void)p->serial_in(p, d->usr_reg);

		return 1;
	}

	return 0;
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
Douglas Anderson
94
54.65%
1
25.00%
Jamie Iles
74
43.02%
1
25.00%
David Daney
3
1.74%
1
25.00%
Tim Kryger
1
0.58%
1
25.00%
Total
172
100.00%
4
100.00%


static void

dw8250_do_pm(struct uart_port *port, unsigned int state, unsigned int old)
{
	if (!state)
		pm_runtime_get_sync(port->dev);

	serial8250_do_pm(port, state, old);

	if (state)
		pm_runtime_put_sync_suspend(port->dev);
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
Heikki Krogerus
51
100.00%
1
100.00%
Total
51
100.00%
1
100.00%



static void dw8250_set_termios(struct uart_port *p, struct ktermios *termios,
			       struct ktermios *old)
{
	unsigned int baud = tty_termios_baud_rate(termios);
	struct dw8250_data *d = p->private_data;
	long rate;
	int ret;

	if (IS_ERR(d->clk) || !old)
		goto out;

	clk_disable_unprepare(d->clk);
	rate = clk_round_rate(d->clk, baud * 16);
	if (rate < 0)
		ret = rate;
	else if (rate == 0)
		ret = -ENOENT;
	else
		ret = clk_set_rate(d->clk, rate);
	clk_prepare_enable(d->clk);

	if (!ret)
		p->uartclk = rate;

out:
	p->status &= ~UPSTAT_AUTOCTS;
	if (termios->c_cflag & CRTSCTS)
		p->status |= UPSTAT_AUTOCTS;

	serial8250_do_set_termios(p, termios, old);
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
Heikki Krogerus
108
65.85%
1
14.29%
Andy Shevchenko
23
14.02%
1
14.29%
Qipeng Zha
21
12.80%
1
14.29%
James Hogan
4
2.44%
1
14.29%
Heiko Stübner
4
2.44%
1
14.29%
Ed Blake
2
1.22%
1
14.29%
Jason Uy
2
1.22%
1
14.29%
Total
164
100.00%
7
100.00%



static void dw8250_set_ldisc(struct uart_port *p, struct ktermios *termios)
{
	struct uart_8250_port *up = up_to_u8250p(p);
	unsigned int mcr = p->serial_in(p, UART_MCR);

	if (up->capabilities & UART_CAP_IRDA) {
		if (termios->c_line == N_IRDA)
			mcr |= DW_UART_MCR_SIRE;
		else
			mcr &= ~DW_UART_MCR_SIRE;

		p->serial_out(p, UART_MCR, mcr);
	}
	serial8250_do_set_ldisc(p, termios);
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
Ed Blake
85
100.00%
1
100.00%
Total
85
100.00%
1
100.00%

/*
 * dw8250_fallback_dma_filter will prevent the UART from getting just any free
 * channel on platforms that have DMA engines, but don't have any channels
 * assigned to the UART.
 *
 * REVISIT: This is a work around for limitation in the DMA Engine API. Once the
 * core problem is fixed, this function is no longer needed.
 */


static bool dw8250_fallback_dma_filter(struct dma_chan *chan, void *param)
{
	return false;
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
Heikki Krogerus
17
94.44%
2
66.67%
Andy Shevchenko
1
5.56%
1
33.33%
Total
18
100.00%
3
100.00%



static bool dw8250_idma_filter(struct dma_chan *chan, void *param)
{
	return param == chan->device->dev->parent;
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
Heikki Krogerus
26
100.00%
3
100.00%
Total
26
100.00%
3
100.00%



static void dw8250_quirks(struct uart_port *p, struct dw8250_data *data)
{
	if (p->dev->of_node) {
		struct device_node *np = p->dev->of_node;
		int id;

		/* get index of serial line, if found in DT aliases */
		id = of_alias_get_id(np, "serial");
		if (id >= 0)
			p->line = id;
#ifdef CONFIG_64BIT
		if (of_device_is_compatible(np, "cavium,octeon-3860-uart")) {
			p->serial_in = dw8250_serial_inq;
			p->serial_out = dw8250_serial_outq;
			p->flags = UPF_SKIP_TEST | UPF_SHARE_IRQ | UPF_FIXED_TYPE;
			p->type = PORT_OCTEON;
			data->usr_reg = 0x27;
			data->skip_autocfg = true;
		}
#endif
		if (of_device_is_big_endian(p->dev->of_node)) {
			p->iotype = UPIO_MEM32BE;
			p->serial_in = dw8250_serial_in32be;
			p->serial_out = dw8250_serial_out32be;
		}
	} else if (has_acpi_companion(p->dev)) {
		const struct acpi_device_id *id;

		id = acpi_match_device(p->dev->driver->acpi_match_table,
				       p->dev);
		if (id && !strcmp(id->id, "APMC0D08")) {
			p->iotype = UPIO_MEM32;
			p->regshift = 2;
			p->serial_in = dw8250_serial_in32;
			data->uart_16550_compatible = true;
		}
	}

	/* Platforms with iDMA */
	if (platform_get_resource_byname(to_platform_device(p->dev),
					 IORESOURCE_MEM, "lpss_priv")) {
		data->dma.rx_param = p->dev->parent;
		data->dma.tx_param = p->dev->parent;
		data->dma.fn = dw8250_idma_filter;
	}
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
Heikki Krogerus
184
66.91%
8
61.54%
David Daney
56
20.36%
2
15.38%
Noam Camus
31
11.27%
1
7.69%
Julien CHAUVEAU
3
1.09%
1
7.69%
Andy Shevchenko
1
0.36%
1
7.69%
Total
275
100.00%
13
100.00%



static void dw8250_setup_port(struct uart_port *p)
{
	struct uart_8250_port *up = up_to_u8250p(p);
	u32 reg;

	/*
         * If the Component Version Register returns zero, we know that
         * ADDITIONAL_FEATURES are not enabled. No need to go any further.
         */
	if (p->iotype == UPIO_MEM32BE)
		reg = ioread32be(p->membase + DW_UART_UCV);
	else
		reg = readl(p->membase + DW_UART_UCV);
	if (!reg)
		return;

	dev_dbg(p->dev, "Designware UART version %c.%c%c\n",
		(reg >> 24) & 0xff, (reg >> 16) & 0xff, (reg >> 8) & 0xff);

	if (p->iotype == UPIO_MEM32BE)
		reg = ioread32be(p->membase + DW_UART_CPR);
	else
		reg = readl(p->membase + DW_UART_CPR);
	if (!reg)
		return;

	/* Select the type based on fifo */
	if (reg & DW_UART_CPR_FIFO_MODE) {
		p->type = PORT_16550A;
		p->flags |= UPF_FIXED_TYPE;
		p->fifosize = DW_UART_CPR_FIFO_SIZE(reg);
		up->capabilities = UART_CAP_FIFO;
	}

	if (reg & DW_UART_CPR_AFCE_MODE)
		up->capabilities |= UART_CAP_AFE;

	if (reg & DW_UART_CPR_SIR_MODE)
		up->capabilities |= UART_CAP_IRDA;
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
Heikki Krogerus
140
72.92%
1
33.33%
Noam Camus
40
20.83%
1
33.33%
Ed Blake
12
6.25%
1
33.33%
Total
192
100.00%
3
100.00%



static int dw8250_probe(struct platform_device *pdev)
{
	struct uart_8250_port uart = {};
	struct resource *regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
	int irq = platform_get_irq(pdev, 0);
	struct uart_port *p = &uart.port;
	struct device *dev = &pdev->dev;
	struct dw8250_data *data;
	int err;
	u32 val;

	if (!regs) {
		dev_err(dev, "no registers defined\n");
		return -EINVAL;
	}

	if (irq < 0) {
		if (irq != -EPROBE_DEFER)
			dev_err(dev, "cannot get irq\n");
		return irq;
	}

	spin_lock_init(&p->lock);
	p->mapbase	= regs->start;
	p->irq		= irq;
	p->handle_irq	= dw8250_handle_irq;
	p->pm		= dw8250_do_pm;
	p->type		= PORT_8250;
	p->flags	= UPF_SHARE_IRQ | UPF_FIXED_PORT;
	p->dev		= dev;
	p->iotype	= UPIO_MEM;
	p->serial_in	= dw8250_serial_in;
	p->serial_out	= dw8250_serial_out;
	p->set_ldisc	= dw8250_set_ldisc;
	p->set_termios	= dw8250_set_termios;

	p->membase = devm_ioremap(dev, regs->start, resource_size(regs));
	if (!p->membase)
		return -ENOMEM;

	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
	if (!data)
		return -ENOMEM;

	data->dma.fn = dw8250_fallback_dma_filter;
	data->usr_reg = DW_UART_USR;
	p->private_data = data;

	data->uart_16550_compatible = device_property_read_bool(dev,
						"snps,uart-16550-compatible");

	err = device_property_read_u32(dev, "reg-shift", &val);
	if (!err)
		p->regshift = val;

	err = device_property_read_u32(dev, "reg-io-width", &val);
	if (!err && val == 4) {
		p->iotype = UPIO_MEM32;
		p->serial_in = dw8250_serial_in32;
		p->serial_out = dw8250_serial_out32;
	}

	if (device_property_read_bool(dev, "dcd-override")) {
		/* Always report DCD as active */
		data->msr_mask_on |= UART_MSR_DCD;
		data->msr_mask_off |= UART_MSR_DDCD;
	}

	if (device_property_read_bool(dev, "dsr-override")) {
		/* Always report DSR as active */
		data->msr_mask_on |= UART_MSR_DSR;
		data->msr_mask_off |= UART_MSR_DDSR;
	}

	if (device_property_read_bool(dev, "cts-override")) {
		/* Always report CTS as active */
		data->msr_mask_on |= UART_MSR_CTS;
		data->msr_mask_off |= UART_MSR_DCTS;
	}

	if (device_property_read_bool(dev, "ri-override")) {
		/* Always report Ring indicator as inactive */
		data->msr_mask_off |= UART_MSR_RI;
		data->msr_mask_off |= UART_MSR_TERI;
	}

	/* Always ask for fixed clock rate from a property. */
	device_property_read_u32(dev, "clock-frequency", &p->uartclk);

	/* If there is separate baudclk, get the rate from it. */
	data->clk = devm_clk_get(dev, "baudclk");
	if (IS_ERR(data->clk) && PTR_ERR(data->clk) != -EPROBE_DEFER)
		data->clk = devm_clk_get(dev, NULL);
	if (IS_ERR(data->clk) && PTR_ERR(data->clk) == -EPROBE_DEFER)
		return -EPROBE_DEFER;
	if (!IS_ERR_OR_NULL(data->clk)) {
		err = clk_prepare_enable(data->clk);
		if (err)
			dev_warn(dev, "could not enable optional baudclk: %d\n",
				 err);
		else
			p->uartclk = clk_get_rate(data->clk);
	}

	/* If no clock rate is defined, fail. */
	if (!p->uartclk) {
		dev_err(dev, "clock rate not defined\n");
		err = -EINVAL;
		goto err_clk;
	}

	data->pclk = devm_clk_get(dev, "apb_pclk");
	if (IS_ERR(data->pclk) && PTR_ERR(data->pclk) == -EPROBE_DEFER) {
		err = -EPROBE_DEFER;
		goto err_clk;
	}
	if (!IS_ERR(data->pclk)) {
		err = clk_prepare_enable(data->pclk);
		if (err) {
			dev_err(dev, "could not enable apb_pclk\n");
			goto err_clk;
		}
	}

	data->rst = devm_reset_control_get_optional_exclusive(dev, NULL);
	if (IS_ERR(data->rst)) {
		err = PTR_ERR(data->rst);
		goto err_pclk;
	}
	reset_control_deassert(data->rst);

	dw8250_quirks(p, data);

	/* If the Busy Functionality is not implemented, don't handle it */
	if (data->uart_16550_compatible)
		p->handle_irq = NULL;

	if (!data->skip_autocfg)
		dw8250_setup_port(p);

	/* If we have a valid fifosize, try hooking up DMA */
	if (p->fifosize) {
		data->dma.rxconf.src_maxburst = p->fifosize / 4;
		data->dma.txconf.dst_maxburst = p->fifosize / 4;
		uart.dma = &data->dma;
	}

	data->line = serial8250_register_8250_port(&uart);
	if (data->line < 0) {
		err = data->line;
		goto err_reset;
	}

	platform_set_drvdata(pdev, data);

	pm_runtime_set_active(dev);
	pm_runtime_enable(dev);

	return 0;

err_reset:
	reset_control_assert(data->rst);

err_pclk:
	if (!IS_ERR(data->pclk))
		clk_disable_unprepare(data->pclk);

err_clk:
	if (!IS_ERR(data->clk))
		clk_disable_unprepare(data->clk);

	return err;
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
Heikki Krogerus
389
43.86%
14
48.28%
Chen-Yu Tsai
155
17.47%
2
6.90%
Jamie Iles
125
14.09%
1
3.45%
Heiko Stübner
81
9.13%
1
3.45%
Emilio López
62
6.99%
1
3.45%
Alexey Brodkin
28
3.16%
1
3.45%
Kefeng Wang
12
1.35%
2
6.90%
David Daney
8
0.90%
1
3.45%
Ed Blake
6
0.68%
1
3.45%
Stefan Potyra
6
0.68%
1
3.45%
Jason Uy
6
0.68%
1
3.45%
Philipp Zabel
5
0.56%
2
6.90%
Alan Cox
4
0.45%
1
3.45%
Total
887
100.00%
29
100.00%



static int dw8250_remove(struct platform_device *pdev)
{
	struct dw8250_data *data = platform_get_drvdata(pdev);

	pm_runtime_get_sync(&pdev->dev);

	serial8250_unregister_port(data->line);

	reset_control_assert(data->rst);

	if (!IS_ERR(data->pclk))
		clk_disable_unprepare(data->pclk);

	if (!IS_ERR(data->clk))
		clk_disable_unprepare(data->clk);

	pm_runtime_disable(&pdev->dev);
	pm_runtime_put_noidle(&pdev->dev);

	return 0;
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
Jamie Iles
31
32.29%
1
20.00%
Heikki Krogerus
24
25.00%
1
20.00%
Heiko Stübner
17
17.71%
1
20.00%
Chen-Yu Tsai
14
14.58%
1
20.00%
Emilio López
10
10.42%
1
20.00%
Total
96
100.00%
5
100.00%

#ifdef CONFIG_PM_SLEEP


static int dw8250_suspend(struct device *dev)
{
	struct dw8250_data *data = dev_get_drvdata(dev);

	serial8250_suspend_port(data->line);

	return 0;
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
James Hogan
27
87.10%
1
50.00%
Heikki Krogerus
4
12.90%
1
50.00%
Total
31
100.00%
2
100.00%



static int dw8250_resume(struct device *dev)
{
	struct dw8250_data *data = dev_get_drvdata(dev);

	serial8250_resume_port(data->line);

	return 0;
}
Contributors
Person
Tokens
Prop
Commits
CommitProp
James Hogan
27
87.10%
1
50.00%
Heikki Krogerus
4
12.90%
1
50.00%
Total
31
100.00%
2
100.00%

#endif /* CONFIG_PM_SLEEP */

#ifdef CONFIG_PM


static int dw8250_runtime_suspend(struct device *dev)
{
	struct dw8250_data *data = dev_get_drvdata(dev);

	if (!IS_ERR(data->clk))
		clk_disable_unprepare(data->clk);

	if (!IS_ERR(data->pclk))
		clk_disable_unprepare(data->pclk);

	return 0;
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
Heikki Krogerus
31
53.45%
1
33.33%
Heiko Stübner
17
29.31%
1
33.33%
Ezequiel García
10
17.24%
1
33.33%
Total
58
100.00%
3
100.00%



static int dw8250_runtime_resume(struct device *dev)
{
	struct dw8250_data *data = dev_get_drvdata(dev);

	if (!IS_ERR(data->pclk))
		clk_prepare_enable(data->pclk);

	if (!IS_ERR(data->clk))
		clk_prepare_enable(data->clk);

	return 0;
}
Contributors
Person
Tokens
Prop
Commits
CommitProp
Heikki Krogerus
31
53.45%
1
33.33%
Heiko Stübner
17
29.31%
1
33.33%
Ezequiel García
10
17.24%
1
33.33%
Total
58
100.00%
3
100.00%

#endif


static const struct dev_pm_ops dw8250_pm_ops = {
	SET_SYSTEM_SLEEP_PM_OPS(dw8250_suspend, dw8250_resume)
	SET_RUNTIME_PM_OPS(dw8250_runtime_suspend, dw8250_runtime_resume, NULL)
};


static const struct of_device_id dw8250_of_match[] = {
	{ .compatible = "snps,dw-apb-uart" },
	{ .compatible = "cavium,octeon-3860-uart" },
	{ /* Sentinel */ }
};
MODULE_DEVICE_TABLE(of, dw8250_of_match);


static const struct acpi_device_id dw8250_acpi_match[] = {
	{ "INT33C4", 0 },
	{ "INT33C5", 0 },
	{ "INT3434", 0 },
	{ "INT3435", 0 },
	{ "80860F0A", 0 },
	{ "8086228A", 0 },
	{ "APMC0D08", 0},
	{ "AMD0020", 0 },
	{ "AMDI0020", 0 },
	{ "HISI0031", 0 },
	{ },
};
MODULE_DEVICE_TABLE(acpi, dw8250_acpi_match);


static struct platform_driver dw8250_platform_driver = {
	.driver = {
		.name		= "dw-apb-uart",
		.pm		= &dw8250_pm_ops,
		.of_match_table	= dw8250_of_match,
		.acpi_match_table = ACPI_PTR(dw8250_acpi_match),
        },
	.probe			= dw8250_probe,
	.remove			= dw8250_remove,
};

module_platform_driver(dw8250_platform_driver);

MODULE_AUTHOR("Jamie Iles");
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("Synopsys DesignWare 8250 serial port driver");
MODULE_ALIAS("platform:dw-apb-uart");
Overall Contributors
Person
Tokens
Prop
Commits
CommitProp
Heikki Krogerus
1190
36.95%
24
33.33%
Jamie Iles
437
13.57%
1
1.39%
Noam Camus
313
9.72%
3
4.17%
David Daney
199
6.18%
2
2.78%
Chen-Yu Tsai
177
5.50%
2
2.78%
Tim Kryger
164
5.09%
2
2.78%
Heiko Stübner
141
4.38%
2
2.78%
Ed Blake
110
3.42%
2
2.78%
Douglas Anderson
94
2.92%
1
1.39%
James Hogan
82
2.55%
3
4.17%
Emilio López
80
2.48%
1
1.39%
Andy Shevchenko
35
1.09%
4
5.56%
Kefeng Wang
29
0.90%
4
5.56%
Alexey Brodkin
28
0.87%
1
1.39%
Desmond Liu
28
0.87%
1
1.39%
Qipeng Zha
21
0.65%
1
1.39%
Ezequiel García
20
0.62%
1
1.39%
Mika Westerberg
19
0.59%
3
4.17%
Alan Cox
10
0.31%
2
2.78%
Jason Uy
8
0.25%
1
1.39%
Wang Hongcheng
6
0.19%
1
1.39%
Ken Xue
6
0.19%
1
1.39%
Stefan Potyra
6
0.19%
1
1.39%
Feng Kan
6
0.19%
1
1.39%
Philipp Zabel
5
0.16%
2
2.78%
Julien CHAUVEAU
3
0.09%
1
1.39%
Greg Kroah-Hartman
2
0.06%
2
2.78%
Axel Lin
1
0.03%
1
1.39%
Rafael J. Wysocki
1
0.03%
1
1.39%
Total
3221
100.00%
72
100.00%
Directory: drivers/tty/serial/8250

Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.