cregit-Linux how code gets into the kernel

Release 4.16 include/scsi/srp.h

Directory: include/scsi
/*
 * Copyright (c) 2005 Cisco Systems.  All rights reserved.
 *
 * This software is available to you under a choice of one of two
 * licenses.  You may choose to be licensed under the terms of the GNU
 * General Public License (GPL) Version 2, available from the file
 * COPYING in the main directory of this source tree, or the
 * OpenIB.org BSD license below:
 *
 *     Redistribution and use in source and binary forms, with or
 *     without modification, are permitted provided that the following
 *     conditions are met:
 *
 *      - Redistributions of source code must retain the above
 *        copyright notice, this list of conditions and the following
 *        disclaimer.
 *
 *      - Redistributions in binary form must reproduce the above
 *        copyright notice, this list of conditions and the following
 *        disclaimer in the documentation and/or other materials
 *        provided with the distribution.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
 * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
 * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 * SOFTWARE.
 *
 * $Id$
 */

#ifndef SCSI_SRP_H

#define SCSI_SRP_H

/*
 * Structures and constants for the SCSI RDMA Protocol (SRP) as
 * defined by the INCITS T10 committee.  This file was written using
 * draft Revision 16a of the SRP standard.
 */

#include <linux/types.h>
#include <scsi/scsi.h>


enum {
	
SRP_LOGIN_REQ	= 0x00,
	
SRP_TSK_MGMT	= 0x01,
	
SRP_CMD		= 0x02,
	
SRP_I_LOGOUT	= 0x03,
	
SRP_LOGIN_RSP	= 0xc0,
	
SRP_RSP		= 0xc1,
	
SRP_LOGIN_REJ	= 0xc2,
	
SRP_T_LOGOUT	= 0x80,
	
SRP_CRED_REQ	= 0x81,
	
SRP_AER_REQ	= 0x82,
	
SRP_CRED_RSP	= 0x41,
	
SRP_AER_RSP	= 0x42
};


enum {
	
SRP_BUF_FORMAT_DIRECT	= 1 << 1,
	
SRP_BUF_FORMAT_INDIRECT	= 1 << 2
};


enum {
	
SRP_NO_DATA_DESC	= 0,
	
SRP_DATA_DESC_DIRECT	= 1,
	
SRP_DATA_DESC_INDIRECT	= 2
};


enum {
	
SRP_TSK_ABORT_TASK	= 0x01,
	
SRP_TSK_ABORT_TASK_SET	= 0x02,
	
SRP_TSK_CLEAR_TASK_SET	= 0x04,
	
SRP_TSK_LUN_RESET	= 0x08,
	
SRP_TSK_CLEAR_ACA	= 0x40
};


enum srp_login_rej_reason {
	
SRP_LOGIN_REJ_UNABLE_ESTABLISH_CHANNEL		= 0x00010000,
	
SRP_LOGIN_REJ_INSUFFICIENT_RESOURCES		= 0x00010001,
	
SRP_LOGIN_REJ_REQ_IT_IU_LENGTH_TOO_LARGE	= 0x00010002,
	
SRP_LOGIN_REJ_UNABLE_ASSOCIATE_CHANNEL		= 0x00010003,
	
SRP_LOGIN_REJ_UNSUPPORTED_DESCRIPTOR_FMT	= 0x00010004,
	
SRP_LOGIN_REJ_MULTI_CHANNEL_UNSUPPORTED		= 0x00010005,
	
SRP_LOGIN_REJ_CHANNEL_LIMIT_REACHED		= 0x00010006
};


enum {
	
SRP_REV10_IB_IO_CLASS	= 0xff00,
	
SRP_REV16A_IB_IO_CLASS	= 0x0100
};


struct srp_direct_buf {
	
__be64	va;
	
__be32	key;
	
__be32  len;
};

/*
 * We need the packed attribute because the SRP spec puts the list of
 * descriptors at an offset of 20, which is not aligned to the size of
 * struct srp_direct_buf.  The whole structure must be packed to avoid
 * having the 20-byte structure padded to 24 bytes on 64-bit architectures.
 */

struct srp_indirect_buf {
	
struct srp_direct_buf	table_desc;
	
__be32			len;
	
struct srp_direct_buf	desc_list[0];
} __attribute__((packed));


enum {
	
SRP_MULTICHAN_SINGLE = 0,
	
SRP_MULTICHAN_MULTI  = 1
};


struct srp_login_req {
	
u8	opcode;
	
u8	reserved1[7];
	
u64	tag;
	
__be32	req_it_iu_len;
	
u8	reserved2[4];
	
__be16	req_buf_fmt;
	
u8	req_flags;
	
u8	reserved3[5];
	
u8	initiator_port_id[16];
	
u8	target_port_id[16];
};

/**
 * struct srp_login_req_rdma - RDMA/CM login parameters.
 *
 * RDMA/CM over InfiniBand can only carry 92 - 36 = 56 bytes of private
 * data. The %srp_login_req_rdma structure contains the same information as
 * %srp_login_req but with the reserved data removed.
 */

struct srp_login_req_rdma {
	
u64	tag;
	
__be16	req_buf_fmt;
	
u8	req_flags;
	
u8	opcode;
	
__be32	req_it_iu_len;
	
u8	initiator_port_id[16];
	
u8	target_port_id[16];
};

/*
 * The SRP spec defines the size of the LOGIN_RSP structure to be 52
 * bytes, so it needs to be packed to avoid having it padded to 56
 * bytes on 64-bit architectures.
 */

struct srp_login_rsp {
	
u8	opcode;
	
u8	reserved1[3];
	
__be32	req_lim_delta;
	
u64	tag;
	
__be32	max_it_iu_len;
	
__be32	max_ti_iu_len;
	
__be16	buf_fmt;
	
u8	rsp_flags;
	
u8	reserved2[25];
} __attribute__((packed));


struct srp_login_rej {
	
u8	opcode;
	
u8	reserved1[3];
	
__be32	reason;
	
u64	tag;
	
u8	reserved2[8];
	
__be16	buf_fmt;
	
u8	reserved3[6];
};


struct srp_i_logout {
	
u8	opcode;
	
u8	reserved[7];
	
u64	tag;
};


struct srp_t_logout {
	
u8	opcode;
	
u8	sol_not;
	
u8	reserved[2];
	
__be32	reason;
	
u64	tag;
};

/*
 * We need the packed attribute because the SRP spec only aligns the
 * 8-byte LUN field to 4 bytes.
 */

struct srp_tsk_mgmt {
	
u8	opcode;
	
u8	sol_not;
	
u8	reserved1[6];
	
u64	tag;
	
u8	reserved2[4];
	
struct scsi_lun	lun;
	
u8	reserved3[2];
	
u8	tsk_mgmt_func;
	
u8	reserved4;
	
u64	task_tag;
	
u8	reserved5[8];
};

/*
 * We need the packed attribute because the SRP spec only aligns the
 * 8-byte LUN field to 4 bytes.
 */

struct srp_cmd {
	
u8	opcode;
	
u8	sol_not;
	
u8	reserved1[3];
	
u8	buf_fmt;
	
u8	data_out_desc_cnt;
	
u8	data_in_desc_cnt;
	
u64	tag;
	
u8	reserved2[4];
	
struct scsi_lun	lun;
	
u8	reserved3;
	
u8	task_attr;
	
u8	reserved4;
	
u8	add_cdb_len;
	
u8	cdb[16];
	
u8	add_data[0];
};


enum {
	
SRP_RSP_FLAG_RSPVALID = 1 << 0,
	
SRP_RSP_FLAG_SNSVALID = 1 << 1,
	
SRP_RSP_FLAG_DOOVER   = 1 << 2,
	
SRP_RSP_FLAG_DOUNDER  = 1 << 3,
	
SRP_RSP_FLAG_DIOVER   = 1 << 4,
	
SRP_RSP_FLAG_DIUNDER  = 1 << 5
};

/*
 * The SRP spec defines the size of the RSP structure to be 36 bytes,
 * so it needs to be packed to avoid having it padded to 40 bytes on
 * 64-bit architectures.
 */

struct srp_rsp {
	
u8	opcode;
	
u8	sol_not;
	
u8	reserved1[2];
	
__be32	req_lim_delta;
	
u64	tag;
	
u8	reserved2[2];
	
u8	flags;
	
u8	status;
	
__be32	data_out_res_cnt;
	
__be32	data_in_res_cnt;
	
__be32	sense_data_len;
	
__be32	resp_data_len;
	
u8	data[0];
} __attribute__((packed));


struct srp_cred_req {
	
u8	opcode;
	
u8	sol_not;
	
u8	reserved[2];
	
__be32	req_lim_delta;
	
u64	tag;
};


struct srp_cred_rsp {
	
u8	opcode;
	
u8	reserved[7];
	
u64	tag;
};

/*
 * The SRP spec defines the fixed portion of the AER_REQ structure to be
 * 36 bytes, so it needs to be packed to avoid having it padded to 40 bytes
 * on 64-bit architectures.
 */

struct srp_aer_req {
	
u8	opcode;
	
u8	sol_not;
	
u8	reserved[2];
	
__be32	req_lim_delta;
	
u64	tag;
	
u32	reserved2;
	
struct scsi_lun	lun;
	
__be32	sense_data_len;
	
u32	reserved3;
	
u8	sense_data[0];
} __attribute__((packed));


struct srp_aer_rsp {
	
u8	opcode;
	
u8	reserved[7];
	
u64	tag;
};

#endif /* SCSI_SRP_H */

Overall Contributors

PersonTokensPropCommitsCommitProp
Roland Dreier58278.76%233.33%
Dave Dillow10414.07%116.67%
Bart Van Assche425.68%233.33%
Ramachandra K111.49%116.67%
Total739100.00%6100.00%
Directory: include/scsi
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with cregit.